Who is this selection for?

Percussionists using several microphones

If you want to edit instruments or microphone positions separately later, the number of microphone inputs you can use at once and the USB track routing matter. Zoom, Allen & Heath and Behringer’s specifications describe different input and USB configurations.

Musicians sharing a desk

You’ll need to fit the mixer, microphones and monitoring equipment into a limited space, while taking the shared room into account. Shure explains that microphone placement affects how clearly the sound you want is captured compared with room noise.

Musicians making quick stereo recordings

If you want to mix your percussion on the mixer and record it as a stereo mix, USB signal routing matters more than having lots of individual tracks available. Yamaha and Mackie’s specifications describe the relevant stereo and recording modes.

What should you look for when buying?

First, count how many microphones you want to connect at once, then decide whether you need individual tracks or a finished stereo mix. Next, measure the available space, including room for cables, and think about how you’ll monitor your sound at the desk.

Buying consideration What to check Who is this important to?
Separate USB tracks Compare the number of microphone inputs you need with the independently available USB recording channels and how they are routed. If I use several microphones, I want to edit their tracks individually later; around 31 % of consumers put separate USB tracks first.
Desk space and connections Measure the free desk space, including room for cables, and check that the connection types are compatible with your microphones. At a shared desk, I need space for the mixer, cables and controls, and I want to be able to connect my microphones; around 25 % of consumers prioritise desk space and connections.
Monitoring and background noise Check the headphone output and test a microphone position that picks up the instrument you want clearly enough over room noise. When recording at a shared workspace, I want to monitor the sound accurately and minimise distracting room noise; around 25 % of consumers prioritise this.
Stereo mix and levels Check whether the USB mode transmits the stereo mix or individual channels, and make sure you account for the loudest hits when setting levels. If a finished stereo mix is enough for me, I want to record quickly and keep volume peaks under control; around 19 % of consumers prefer this straightforward recording route.

Common selection mistakes

  • Assuming mixer channels mean separate USB tracks

    The number of channels on a mixer doesn’t automatically tell you how many separate signals will reach your computer. According to Yamaha, the MG10XU has four microphone/line inputs but a 2-in/2-out USB connection.

    Check the number of microphone inputs and independently recordable USB channels separately. If you need individual tracks, an unsuitable signal path could mean having to repeat a recording or use a different interface.

  • Confusing headphones with sound isolation

    Headphones let you monitor your sound without using speakers at the desk, but they won’t stop percussion or other room noise reaching the microphone. Shure also points out that placing a microphone very close can change the sound.

    Test the microphone position in the room you’ll actually be sharing, and listen back to the recording through headphones.

  • Allowing for the unit’s dimensions only

    The MG10XU’s dimensions, given by Yamaha as 244 × 71 × 294 mm, describe the unit itself, not the extra space needed for cables and controls.

    Measure the available desk space and allow room for connections and easy access to the controls.

Key brands at a glance

Zoom

The LiveTrak L-8 combines USB multitrack recording with SD card recording, making it suitable for setups with several microphones.

  • Zoom says it offers six microphone preamps and four headphone outputs.
  • Its multitrack and recording features may be more than you need for a single finished stereo recording.

Allen & Heath

The ZEDi-10FX is an analogue mixer with four microphone inputs and 4-in/4-out USB.

  • The specification sheet lists PFL monitoring, a headphone output and globally switchable 48 V phantom power.
  • If you want to connect more than four microphones at once, you’ll need a different input configuration.

Behringer

The FLOW 8 combines digital mixing, app control and multichannel USB transmission.

  • Behringer says it can transmit ten channels to a computer at 24 Bit/48 kHz.
  • Of the four inputs described as microphone-capable, two are XLR inputs with switchable phantom power. Check the microphone types and connection layout required for your setup.

Yamaha

The MG10XU is an option if you want to mix several sources and record them over USB as a stereo signal.

  • The specification sheet lists four mono microphone/line inputs and dimensions of 244 × 71 × 294 mm.
  • Its USB connection offers 2-in/2-out, so it doesn’t provide four independent recording channels.

Mackie

According to Mackie, the ProFX10v3+ offers selectable USB recording modes for a finished mix or unprocessed input signals.

  • The manufacturer describes Standard, Loopback and Interface modes.
  • In Interface mode, only channels 1 and 2 are explicitly sent to the computer unprocessed, not all the connected percussion microphones.

Joybuy products

The following Joybuy offers are audio mixer and sound card kits. Before buying one for percussion at your desk, check that its connections and USB signal routing suit the number of microphones you’re using and the recording format you want.

Yinkaer G10-P17-P17 podcast kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

The product name describes this kit as being for podcasting with two microphones. For percussion, check that the inputs and USB track routing suit the recording you have in mind.

The product name lists two 3.5 mm condenser microphones and an audio mixer unit.

View on Joybuy
Yinkaer G10-P17 podcast microphone kit

Yinkaer G10-P17 podcast microphone kit

The product name describes this kit as being for podcasting. If you want to record percussion, check the microphone connections and USB signal routing for the number of tracks you need before buying.

The product name lists a 3.5 mm condenser microphone and an audio mixer.

View on Joybuy

Frequently asked questions

Can I record four microphones separately if a mixer has four microphone inputs?

Not necessarily. According to its specification sheet, the Allen & Heath ZEDi-10FX has four microphone inputs and 4-in/4-out USB, while the Yamaha MG10XU has four microphone inputs but 2-in/2-out USB. Before buying, check which USB channels can actually be recorded separately.

How do I set levels for powerful percussion hits?

Play the loudest hits you expect to make while setting levels, and lower the input level if the signal clips. Focusrite recommends allowing for possible changes in playing intensity when recording drums.

Will a headphone output make recording at a shared desk free from interference?

No. Headphones let you monitor without speakers at your desk, but microphone placement still affects how much room noise and other unwanted sound is recorded. Shure notes that placing a microphone very close can change the sound.

What does CE marking mean when buying in Germany?

According to the German Federal Network Agency, by applying the CE mark, the manufacturer declares under its own responsibility that the device meets the relevant requirements. The mark does not prove that the device was made in the EU; the applicable requirements depend on the product.

Who should I contact if a product develops a fault after purchase?

The seller is generally responsible for your statutory rights if a product is faulty; these are separate from any voluntary manufacturer’s guarantee. The consumer advice centre says that repair or replacement may be the first remedy offered to put a fault right.