When recording poetry in an untreated, reverberant room, microphone placement and the recording location matter more than extra mixer features. Shure explains that a microphone cannot effectively separate direct speech from reflected sound. For a single voice recorded on a computer, a compact USB mixer may be enough; multiple voices, separate post-production or recording without a computer call for suitable multitrack or recorder features. Before you buy, check the actual USB recording options and the inputs you need, not just the number of channels on the front of the unit.
Which setups are right for different users?
Solo speakers in a reverberant room
If you want to record a single voice, start by checking the microphone distance and position. A suitable USB recording setup is important; Shure points out that reflections are picked up by the microphone along with the voice.
Ensembles with separate voices
If you want to edit several speakers or additional sound sources individually later, look for separately recordable signals. Behringer lists ten USB channels for the FLOW 8, while Zoom describes separate tracks on the LiveTrak L-8.
Recording without a computer running
If you want to record a performance directly on the device, check the storage medium and the recording and export options. Tascam and Zoom describe models that record to an SD card; RØDE also lists microSD and USB storage for the RØDECaster Duo.
What should you consider when choosing?
Compact USB mixer
Best for: Recording mainly one voice on a computer.
Consider: Check the number of USB recording channels and exactly which signal the selected mode sends.
USB multitrack recording
Best for: Recording several voices or playback sources that you want to edit separately later.
Consider: Check the inputs you can use at the same time, your computer workflow and how well the setup suits your line-up.
Mixer with an integrated recorder
Best for: Recording without a computer running.
Consider: Storage, power and file export all form part of the recording workflow. The extra features may be unnecessary for a single voice.
| Priority |
What to check before buying |
Who it matters most to |
| Clear speech despite room reverberation |
Microphone input and headphone monitoring; listen to a test recording made at the planned speaking location. |
If I’m recording one voice in a reverberant room, I want to check the microphone position and speech clarity first. Around 36% of consumers put clear solo speech first. |
| Editing voices and playback sources separately |
Compare the number of microphone inputs you can use at once with the signals that can be recorded separately over USB. |
If several speakers or playback sources need adjusting individually later, I need separate signals rather than just a stereo mix. Around 29% of consumers prioritise being able to edit voices and sound sources separately. |
| Recording without a computer |
Check the storage medium, whether individual tracks can be recorded and how to export the files afterwards. |
If I don’t want to use a computer during the performance, I need a built-in recorder and a straightforward way to export the files. Around 21% of consumers prioritise recording without a computer. |
| A straightforward USB workflow |
Check the microphone inputs you need and what is recorded over USB: the mix, input signals or loopback audio. |
If I’m recording a small line-up on a computer, I want a simple connection and a suitable recording option. Around 14% of consumers prioritise an uncomplicated USB workflow. |
Common buying mistakes
-
Buying a bigger mixer to solve poor room acoustics
A microphone picks up direct speech and reflections together. Extra mixer features can’t separate these signals after recording; Shure explains this limitation in its guidance on microphone placement.
First, try different microphone positions and locations, and make a test recording. Then decide which mixer features you actually need.
-
Assuming mixer channels are the same as separate USB recording tracks
The number of channels on a unit alone doesn’t tell you how many signals can be recorded separately on a computer. Yamaha lists USB audio with 2 inputs and 2 outputs for the AG06MK2; Tascam describes the Model 12 as having a USB interface with 12 inputs and 10 outputs.
Compare the documented USB inputs and recording options with the number of signals you want to edit individually later.
-
Using the wrong USB mode on the Mackie ProFX6v3+
According to Mackie, Standard, Loopback and Interface modes record different signals. The wrong mode can mean extra editing or make it impossible to edit elements separately as you intended.
Choose a mode that suits your project, then make a short test recording and check it with headphones before the performance.
Relevant brands at a glance
The model ranges below differ in their USB recording options, multitrack recording and recorder features. The features listed apply to the specific models, not to each brand’s entire range.
Yamaha
The AG06MK2 is designed for compact voice setups with a computer.
- Yamaha Deutschland lists two microphone inputs and USB audio with 2 inputs and 2 outputs.
- If you need several sources as separate USB tracks, bear this two-channel limit in mind when choosing.
Mackie
The ProFX6v3+ offers different ways to record audio over USB.
- According to Mackie, Interface mode sends the unprocessed channels 1 and 2; Loopback can include computer audio.
- Choose the recording mode to match the signal you want, and set it before recording.
Behringer
The FLOW 8 combines digital mixing with multichannel USB transmission.
- Behringer lists ten channels at 24 Bit/48 kHz for transmission to a computer, as well as app control.
- Check that the input types and app or computer workflow suit your line-up. Technical specifications come from the manufacturer and are not an independent sound test.
Zoom
The LiveTrak L-8 combines a USB interface, separate tracks and SD recording.
- Zoom lists six microphone preamps, separate SD tracks and four headphone outputs.
- The extra features take more setting up than a simple solo setup.
Tascam
The Model 12 combines a standalone multitrack recorder with computer-based editing.
- Tascam lists ten inputs, a 12-track recorder using an SD card and a USB interface with 12 inputs and 10 outputs.
- Check whether you really need all these features for your recording; manufacturer claims about sound quality are not independent measurements.
RØDE
The RØDECaster Duo lets you record voice productions on the unit or on a computer.
- RØDE lists two combo inputs and stereo or multitrack recording to microSD, USB storage or a computer.
- For a single poetry reading, the extra features may be more than you need; advertised usability and sound benefits are manufacturer claims.
Joybuy products for voice and computer setups
The selection below includes audio mixer and sound card kits listed for voice and computer setups.
No image available
Yinkaer G10-P17-P17 podcast kit with two microphones
The product name describes the kit as an audio mixer and sound card for computer or phone setups.
The title lists two 3.5 mm condenser microphones and stands.
View on Joybuy
Frequently asked questions
Can a USB mixer remove room reverberation?
No. A microphone picks up direct and reflected speech together, as Shure explains in its guidance on microphone placement. Before the performance, compare different positions using a test recording, and don’t rely on effects as a substitute for a suitable recording location.
How can I check that voices and playback sources are being recorded correctly?
Make a short test recording and play it back. According to Mackie, Standard, Loopback and Interface modes on the ProFX6v3+ differ in whether they record the main mix, computer audio or unprocessed input channels. Choose the mode that suits your project.
What should I consider when recording without a computer?
Check the storage medium, the recording option you want and how to export files on the specific device. Tascam describes WAV recording to an SD card on the Model 12; Zoom lists separate tracks to an SD card on the LiveTrak L-8. The workflow varies by model.
Can I publish someone else’s poem online if I’ve recorded it myself?
Making your own recording doesn’t automatically give you permission to publish the text. Under section 2 of the German Copyright Act (UrhG), literary works are protected; section 19a of the UrhG covers making works publicly available online. Check the rights to the specific text and, where relevant, any other elements of the recording before publishing it.