Who is a USB mixer suitable for?

Solo singers with limited desk space

If you want to quickly clear a shared desk for singing and headphones, check the space the mixer takes up and which connections can actually be used at the same time. Yamaha and Behringer’s specifications help you understand the connection options on each model.

Singers recording with playback

If you want to hear a backing track but decide exactly what goes into your USB recording, the playback and routing modes are key. Yamaha, Mackie and Behringer describe different signal paths for their respective models.

Singers planning to expand their setup

If you might want to record additional microphones or separate tracks later, don’t assume that extra inputs mean separate USB recording tracks. Mackie, Tascam and Zoom describe different options for additional sources and multitrack recording.

What should you look for when buying?

First, check that the microphone connection and headphone output suit your setup. Then consider how the mixer routes playback and vocals for the type of recording you want to make.

What you need What to check before buying Who is this important for?
Microphone and headphones on a cramped desk Check that the microphone plug and power requirements match, and measure the mixer along with the space needed for its cables. On the Yamaha AG03MK2, an XLR microphone and a headset microphone cannot both be used on channel 1 at the same time. If I want to connect a microphone and monitor through headphones at a shared desk, a suitable connection in a compact unit matters to me. Around 36% of consumers prioritise this microphone and headphone setup.
Hear playback without accidentally recording it Check the USB mode and headphone routing. Yamaha lists DRY, MIX and LOOPBACK output; Mackie describes Standard, Loopback and Interface modes; Behringer routes USB playback to PHONES rather than MAIN MIX. If I want to hear the backing track while singing but keep close control over the recorded vocal, signal routing is my key consideration. Around 29% of consumers prioritise keeping playback and vocals on separate signal paths.
Setting up and packing away at a shared workspace Check the space required, including room for cables, and make sure the power supply suits your workspace. Behringer specifies that the XENYX 302USB can be powered via a computer’s USB port or the included adapter; Yamaha specifies a separate USB-C power supply for the AG03MK2. If I need to clear the desk after recording, I want to be able to plan my setup without unnecessary connections and cables. Around 21% of consumers prioritise being able to clear their workspace quickly.
Multitrack recording in future Check the number of USB recording channels separately from SD multitrack recording. Mackie’s 2×4 USB interface doesn’t mean all six analogue channels can be recorded individually via USB. If I want to edit several sources separately in future, I need suitable multitrack recording, not just extra mixer channels. Around 14% of consumers prioritise the option to expand their setup with separate tracks.

Common selection mistakes

  • Assuming six mixer channels mean six separate USB tracks

    The Mackie ProFX6v3+ has six analogue channels and a 2×4 USB interface. The number of channels alone therefore doesn’t tell you how many signals can be recorded separately on your computer.

    Check the USB recording modes and count the tracks you actually need to record separately. Tascam describes 14-track recording to SD on the Mixcast 4.

  • Leaving loopback switched on while recording vocals

    Depending on the signal path you choose, computer audio may be included in the mix you send or kept separate. If playback is recorded by mistake, you may need to do extra editing afterwards.

    Set up the routing before your take, make a short test recording with playback, then listen to the vocal track on its own.

  • Counting a headset connection as a second microphone input

    On the Yamaha AG03MK2 and Behringer XENYX 302USB, the headset and microphone input paths described for each model cannot be used as separate microphone channels at the same time.

    If you’re planning to expand your setup, only count inputs that can actually be used simultaneously on the specific model.

Key brands at a glance

Yamaha

The AG03MK2 is a compact USB mixer with one microphone channel and a choice of streaming output modes.

  • Yamaha lists mute, a headphone output and DRY, MIX and LOOPBACK modes.
  • The headset and MIC/LINE microphone inputs on channel 1 cannot be used at the same time; USB audio is specified as 2 IN/2 OUT.

Mackie

The ProFX6v3+ is designed for users who need additional analogue inputs and different USB recording modes.

  • Mackie lists two microphone preamps and Standard, Loopback and Interface modes.
  • The 2×4 USB interface doesn’t mean all six analogue channels can be recorded individually via USB.

Behringer

The XENYX 302USB is a compact desktop mixer with one microphone input and USB audio.

  • Behringer describes switchable routing for computer playback and 16 Bit/48 kHz USB audio.
  • The XLR and headset microphone inputs cannot be used at the same time. Check that the power requirements of your condenser microphone are compatible with the specific model.

Tascam

The Mixcast 4 is a production station for users planning to record several microphones and separate tracks, rather than just solo vocals.

  • Tascam lists four microphone inputs, four headphone outputs and 14-track recording to SD.
  • For a single vocal at a shared desk, these features may go beyond what you need right now.

Zoom

The LiveTrak L-8 offers standalone multitrack recording for a future workflow involving multiple sources.

  • Zoom describes separate SD tracks and recording via USB to a computer.
  • Multiple preamps and headphone outputs are mainly useful for solo vocals if you have specific plans to expand your setup.

Joybuy product selection

This selection includes an audio mixer and sound card kit for singing with a computer or mobile device. Check that its connections and signal routing suit your solo recording setup.

Yinkaer G10-P17-P17 audio mixer kit with two microphones

Yinkaer G10-P17-P17 podcast kit with two microphones

The kit is designed for singing with a computer or mobile device. Follow-sing mode keeps the original track audible and outputs vocals and backing music; check that this suits the recording format you want.

The kit includes two 3.5 mm condenser microphones and stands. Before buying, also check that the connections and signal routing suit your microphone, headphones and chosen USB recording setup.

View at Joybuy

Frequently asked questions

Do I need phantom power for a condenser microphone?

It depends on the specific microphone. The Yamaha AG03MK2 specifies +48 V at the MIC/LINE input; check that the voltage and connection match the microphone’s manual.

How can I check whether playback is being recorded?

Make a short vocal test recording while playback is running, then listen to the saved track on its own. Signal paths vary between the Yamaha AG03MK2, Mackie ProFX6v3+ and Behringer XENYX 302USB, for example, so choose the right USB and playback path on your device.

What are my rights if a mixer I bought online is faulty?

In Germany, statutory consumer rights are separate from a voluntary guarantee. The Verbraucherzentrale also notes that many online purchases generally come with a 14-day right to cancel, although exceptions apply. Claims relating to faulty goods are separate from this right.

Can I simply publish a cover song I’ve recorded?

Not simply because you made the recording yourself. According to GEMA, a licence is required for a cover without video that is offered as a download or stream. If you adapt the lyrics or composition, you need the rights holder’s permission before publishing it.