Who is a USB mixer for solo vocals suitable for?

Singers planning to edit their recordings

If you want to edit your vocals independently of the backing track after recording, look for a clearly documented dry USB recording path. Yamaha describes several USB output modes for the AG03MK2; Mackie specifies an interface mode for the ProFX6v3+ that sends unprocessed signals from channels 1 and 2.

Singers who monitor backing tracks through headphones

If you sing along to a backing track, you should be able to distinguish between what you hear while recording and what ends up in the recording. In the modes described by Mackie, Loopback also records computer audio, while Interface mode sends unprocessed signals from channels 1 and 2.

Singers in echoey or shared rehearsal rooms

If you want to reduce room ambience or connect additional sources later, both microphone placement and the actual inputs and USB recording channels matter. Shure recommends trying different microphone distances and positions in the room; more analogue inputs don’t automatically mean more separately recordable USB tracks.

What should you look for when buying?

For solo vocals, the first thing to consider is which signal is recorded over USB. After that, think about monitoring, room sound and the number of inputs you need.

Consideration What to check before buying Who should pay particular attention?
Recording vocals separately Check the USB recording mode and channel assignment for the exact model; don’t rely on the number of mixer channels alone. If I want to edit my voice independently of the backing track later, I need a suitable dry recording path. Around 36% of consumers put recording vocals separately first.
Monitoring the backing track as intended Check whether the backing track is only heard in the headphones or also included in the recording; make a short test recording while it’s playing. If I sing along to a backing track but only want to record my voice, the routing needs to keep the two separate. Around 29% of consumers prioritise controlled backing-track monitoring.
Taking room sound into account Try different positions in the intended room with your own microphone, then listen back to the test recording. If reverb or background noise in the rehearsal room is an issue, I want to know how much the microphone picks up from its chosen position. Around 21% of consumers put managing room sound first.
Connecting additional sources Count the microphone and instrument inputs you need separately from the USB or DAW recording channels that can be used at the same time. If I want to connect and record additional sources separately alongside my voice, I need enough suitable inputs and USB channels. Around 14% of consumers prioritise additional recording sources.

Avoiding buying and recording mistakes

  • Assuming mixer channels are the same as separate USB recording tracks

    Additional analogue inputs don’t automatically mean that more signals can be recorded separately in your DAW at the same time. Allen & Heath lists two simultaneously recordable channels for the ZEDi-8; Yamaha specifies USB audio with 2 IN / 2 OUT for the MG10XU.

    Count the physical inputs you need and the USB recording channels available at the same time separately.

    You may need a different recording device to edit additional sources separately later.

  • Leaving Loopback on when you only want to record your voice

    On the Mackie ProFX6v3+, Loopback mode also records computer audio. This means the backing track may end up in the recording too.

    Choose the mode that suits the result you want, then check it with a short test recording while the backing track is playing.

  • Trying to fix room reverb with mixer effects

    How much room sound ends up in the recording also depends on the microphone’s distance and position. Shure recommends trying different positions and listening back to the recording.

    Test the microphone position in your rehearsal room before making extra mixer effects a reason to buy.

Key brands to consider

Yamaha

The AG03MK2 is designed for a compact solo setup with a choice of USB signal paths, while the MG10XU offers more analogue inputs.

  • Yamaha lists DRY, INPUT MIX and LOOPBACK output modes for the AG03MK2, as well as USB audio with 2 IN / 2 OUT.
  • Yamaha also lists USB audio with 2 IN / 2 OUT for the MG10XU.
  • On the AG03MK2, the Mic/Line input and headset microphone input can’t be used at the same time. The MG10XU’s additional analogue inputs don’t change its stated number of USB channels.

Mackie

According to Mackie, the ProFX6v3+ offers several USB recording modes for unprocessed channel signals, the main mix and computer audio.

  • Interface mode sends unprocessed signals from channels 1 and 2 to the computer.
  • In Standard mode, the main mix, including effects, is recorded; Loopback also records computer audio. Choose the mode that matches the result you want.

Allen & Heath

The ZEDi-8 is an analogue mixer for connecting additional sources when you only need a limited number of USB tracks.

  • The specification sheet lists two mono and two stereo input channels, along with a USB interface with 2 IN / 2 OUT. The microphone inputs have switchable 48 V phantom power.
  • According to the manufacturer’s support team, two channels can be recorded in the DAW at the same time; having more mixer channels doesn’t increase this number.

Behringer

The XENYX 802S is an analogue mixer with USB stereo audio and switchable stream routing.

  • Behringer specifies USB stereo audio at 16 Bit and 48 kHz, as well as 48 V phantom power.
  • The routing switches affect whether computer audio is included in the mix or monitoring. If you want to record your voice separately, check the specific USB recording path.

Soundcraft

The Notepad-8FX combines a compact analogue mixer with a USB interface and built-in effects.

  • Soundcraft lists Lexicon effects and an adjustable headphone output.
  • If you want to record dry solo vocals separately, check the USB signal path and channel assignment in the manual for the exact model.

Joybuy products for solo vocals in the rehearsal room

Related products will be available soon.

Frequently asked questions

Can I connect a condenser microphone to a USB mixer?

Yes, as long as the connection and power requirements are compatible. Yamaha lists switchable +48 V power on the AG03MK2’s Mic/Line input; Allen & Heath specifies switchable 48 V phantom power for the ZEDi-8’s XLR microphone inputs. Also check the requirements of your specific microphone.

How can I record vocals with a backing track without recording the backing track too?

Choose a USB recording mode that captures the signal you want, then check the result with a short test recording. On the ProFX6v3+, Loopback also records computer audio; in Interface mode, Mackie sends the unprocessed signals from channels 1 and 2.

Will a mixer get rid of reverb in the rehearsal room?

No. Room sound can already be picked up during the microphone recording. Shure recommends trying different microphone distances and positions, then listening back to the recording; a mixer can’t completely remove room sound that has already been recorded.

Do more mixer inputs mean more separate USB tracks?

Not automatically. Allen & Heath specifies two channels that can be recorded in the DAW at the same time for the ZEDi-8; Yamaha lists USB audio with 2 IN / 2 OUT for the MG10XU. So check the number of analogue inputs and the number of USB recording channels available at the same time separately.

Can I publish a vocal recording with someone else’s backing track?

Not automatically just because you made the recording yourself. GEMA points out that a cover requires rights to the musical work, and depending on how you use it, you may need to obtain additional rights directly from the rights holders. Check the rights for the specific work and backing track for your intended method of publication.