If you want to edit each violin independently later, choose a mixer with a clearly documented separate USB recording path for the microphones you’re using. Two microphone inputs alone aren’t enough to confirm this. If you’re happy to set the balance before recording, a compact stereo recording path may be all you need. Also check that the phantom power is suitable, that you have the monitoring options you need and, if you’re recording without a computer, that the mixer’s recorder does exactly what you want. Microphone placement in the room will affect the recording too.
Which recording setup is right for you?
Duets with separate track editing
If you want to record both violins at the same time and mix their microphone signals separately afterwards, the documented USB channel assignment is what matters – not the number of faders. Allen & Heath says you can select individual inputs M1 to M4 on the ZEDi-10FX.
Duets with a combined recording
If you can set the balance before you record, a straightforward setup with two microphones may be just right. Yamaha lists two Mic/Line inputs and a USB audio path with 2 inputs and 2 outputs for the AG06MK2.
Duets without a computer running
If you want to save takes to a card or use separate monitoring paths, check the recorder and headphone features of the specific mixer. Zoom documents separate SD tracks and four headphone outputs for the LiveTrak L-8.
What should you look for when buying?
First decide whether you want to edit each violin separately later or whether a duet mix set in advance will do. The other criteria will help you choose a recording path, microphones and monitoring setup to suit your home studio.
Separate USB tracks to a computer
A good fit if: you want to adjust each violin separately in your DAW later. Allen & Heath says you can select the USB assignment M1–M2–M3–M4 on the ZEDi-10FX; Behringer specifies that the FLOW 8 can send ten channels to a computer.
Trade-off: You’ll need to set the correct inputs and USB assignment. Behringer documents switchable 48 V phantom power for inputs 1 and 2 on the FLOW 8’s XLR connectors.
Compact combined mix
A good fit if: you can set the balance as you play and don’t need two violin signals that can be adjusted independently afterwards. Yamaha lists two microphone inputs and a USB audio path with 2 inputs and 2 outputs for the AG06MK2.
Trade-off: You can’t adjust a combined mix later in the same way as two separately recorded microphone signals, so check the signal routing in the mode you plan to use.
Multitrack recording to a card
A good fit if: you want to record separate tracks without a computer running. Zoom documents separate SD tracks and a USB audio path with 12 inputs and 4 outputs for the LiveTrak L-8.
Trade-off: The extra recording and monitoring features are most useful if you’ll use them; the L-8 also requires an SD card. With Mackie’s Onyx8, check the SD recording function for the specific version.
| Buying priority |
What to check before buying |
Who should pay particular attention? |
| Separate violin signals |
Check the number of USB channels, the assignment of the microphone inputs you’ll use and the input selection in your DAW. |
If we want to balance both violins independently after recording, we need signals that can be recorded separately. Around 33% of shoppers put separate tracks first. |
| Simple duet mix |
Check that two microphone inputs can be used at the same time, as well as the actual USB recording path and monitoring options. |
If we can set the balance before recording, we want to keep the setup simple. Around 27% of shoppers prioritise an easy combined mix. |
| Microphones and room |
Check that the connections and, where needed, 48 V phantom power are compatible with your microphones; compare positions using test recordings. |
If we’re using microphones we already own in our room, we want to find a suitable signal path and a position that works. Around 20% of shoppers focus on this compatibility. |
| Card recording and monitoring |
Check whether the card and computer record separate tracks or just a mix, how many headphone outputs you need and which storage medium is included. |
If we want to record without relying on a computer all the time or monitor separately as a pair, the recorder and headphone features matter. Around 20% of shoppers prioritise this kind of use. |
Common buying misconceptions
-
“USB mixer” doesn’t automatically mean a separate track for each microphone
The number of analogue inputs doesn’t tell you which signals can be recorded separately over USB.
Before relying on separate track editing, ask to see the channel assignment for the exact model and operating mode you plan to use.
-
Recording to an SD card doesn’t necessarily mean multitrack recording
Two of Mackie’s documents describe different types of SD recording for the Onyx8: the product page describes multitrack recording, while the data sheet specifies direct stereo recording.
Don’t plan on multitrack recording to SD with this model until you’ve confirmed the feature for the specific version.
-
The mixer alone isn’t a complete duet setup
The right inputs and monitoring options won’t make up for unsuitable microphone placement or the storage medium needed for recording to a card.
Check what’s included and test different microphone positions with practice recordings before assuming that the technical specifications will translate into good sound in your room.
Depending on the equipment you already have, you may also need microphones, XLR cables, stands, headphones or a memory card.
Relevant brands and product ranges
Allen & Heath
The ZEDi-10FX combines mixer controls with a documented option to select separate USB inputs.
- Allen & Heath lists four Mic/Line inputs, a USB audio interface with 4 inputs and 4 outputs, and globally switched 48 V phantom power.
- You’ll need to select the USB assignment you want for your recording. These details apply to the ZEDi-10FX, not to all ZED models.
Zoom
The LiveTrak L-8 combines a mixer, separate recording to an SD card and a USB audio path for a computer.
- Zoom documents six microphone preamps with phantom power, separate SD tracks and a USB interface with 12 inputs and 4 outputs.
- A Bonedo review dated 3 April 2020 notes that the SD card must be bought separately; this doesn’t indicate whether it’s currently available.
Yamaha
The AG06MK2 is designed for a compact two-microphone setup when a mix set in advance will do.
- Yamaha lists two Mic/Line inputs, phantom power on both and USB audio with 2 inputs and 2 outputs.
- A stereo bus doesn’t confirm that the two violins will come through as separate input tracks you can edit independently in the mode you want to use.
Behringer
The FLOW 8 offers a digital mixing path with multichannel USB transfer to a computer.
- Behringer says it can send ten channels to a computer at 24 Bit/48 kHz.
- Switchable 48 V phantom power is documented for XLR microphone inputs 1 and 2. Don’t assume the other combo inputs have the same features for condenser microphones.
Mackie
The Onyx8 is an option for USB multitrack recording with analogue mixer controls.
- Mackie’s data sheet lists multitrack recording over USB.
- The manufacturer’s information on direct SD recording differs: the data sheet specifies stereo recording, while the product page describes multitrack recording. Don’t plan on using the SD function until you’ve confirmed it for the specific version.
Matching products at Joybuy
Related products will be available soon.
Frequently asked questions
Are two microphone inputs enough to record two violins that can be adjusted separately later?
No. Two microphone inputs alone don’t confirm that the signals can be recorded separately. Allen & Heath documents the option to select individual inputs M1 and M2 on the ZEDi-10FX; Yamaha lists two microphone inputs, a stereo bus and a USB path with 2 inputs and 2 outputs for the AG06MK2.
How should we start positioning the microphones?
Make short test recordings from different positions and listen back together. DPA Microphones describes its positioning guidance as suggestions; placing a microphone very close can be a compromise compared with the sound you hear from further away.
Can I connect any two microphones as long as the mixer has 48 V?
No. Check each microphone’s connection and power requirements, and whether 48 V is switched on individually or globally. Take particular care with older or passive ribbon microphones; Focusrite advises contacting the microphone manufacturer if you’re unsure.
What additional costs and consumer rights should I consider when buying online in Germany?
Check whether the offer includes any microphones and XLR cables you need, along with the storage medium if you’re recording to a card; a Bonedo review of the LiveTrak L-8 notes that the SD card must be bought separately. When buying at a distance from a trader, consumers in the EU generally have a 14-day right to cancel and at least two years of legal guarantee. Exceptions may apply, and the product and seller status are relevant; a voluntary manufacturer’s warranty does not replace your statutory rights. The European Union’s Your Europe website explains these rights and their conditions.