Stereo recording in a small space
You want to record a piano performance with a pre-set mix and quickly clear the shared desk afterwards. Look for suitable microphone inputs, clear USB routing and compact dimensions.
For a pre-mixed stereo recording on a computer, a compact USB mixer with suitable microphone inputs and a clear signal path should be enough. Yamaha, Mackie and Soundcraft describe these features for selected models. If you want to edit the microphones separately later, or record without a computer running, check the specific USB tracks or built-in SD recorder instead. Signal routing, desk space and any extra setup involved should all inform your decision.
You want to record a piano performance with a pre-set mix and quickly clear the shared desk afterwards. Look for suitable microphone inputs, clear USB routing and compact dimensions.
You want to balance piano microphones or additional sources independently after the performance. Check that the signals can actually be recorded separately; don’t rely on the number of mixer channels alone.
You need a built-in recorder and should plan for power, storage media and a full test run before the performance.
A good fit if: You set the levels for two microphones before the performance and want to record a finished mix on your computer. The Yamaha AG06MK2, Mackie ProFX6v3+ and Soundcraft Notepad-8FX are models whose inputs and USB modes you can compare for this setup.
Bear in mind: Sources that have already been mixed together can’t easily be balanced independently later. With the Mackie, the choice between Standard, Loopback and Interface modes affects the signal being recorded.
A good fit if: You want to edit additional sources separately alongside your microphone pair and have a suitable computer recording setup. Allen & Heath specifies a 4-in/4-out USB interface for the ZEDi-10.
Bear in mind: The number of USB inputs alone doesn’t tell you which connected sources will be recorded on separate tracks. Check the signal routing and the space you have available.
A good fit if: You want to record at the venue without a computer running, or save separate tracks. Zoom describes this option for the LiveTrak L-8.
Bear in mind: Storage media, power and a test recording are all part of the process. For a straightforward stereo recording, this setup may involve more than you need.
| What you need | What to check before buying | Who should pay particular attention |
|---|---|---|
| Inputs and stereo signal | Check the microphone type, connection and whether phantom power is needed. Test the USB mode and record with both microphones. | If I want to combine two piano microphones directly into a finished mix, the connections and USB signal path need to work together. Around 31% of consumers prioritise getting a reliable stereo recording. |
| Separate tracks | Check which USB or SD signals can be recorded separately, and how they’re routed on the specific model. | If you want to change the balance of individual microphones after the performance, check in advance which signals will be recorded separately in your software or on the card. Around 25% of consumers prioritise editing individual tracks later. |
| Space and cables | Measure the available desk space, taking connections, plugged-in cables and work equipment into account. | If I share a desk and need to put the mixer away afterwards, I need to consider the space for the whole setup, not just the unit itself. Around 25% of consumers focus primarily on the space it takes up. |
| Recording without a computer | Check SD recording, power and storage media; make a full test recording before the performance. | If I’m not planning to have a computer running at the recording location, I need a suitable standalone recording setup, including storage and power. Around 19% of consumers place the greatest importance on recording without a computer. |
The percentages refer to consumers choosing a USB mixer to record a piano performance at a shared desk. Each person is grouped according to their main priority.
More inputs don’t automatically mean that every source will be recorded separately on your computer or memory card.
Make a note of which recordable track each microphone should go to, then check the signal routing for the specific model. Allen & Heath specifies four USB input signals for the ZEDi-10; Zoom lists separate SD tracks for the LiveTrak L-8.
If the saved mix doesn’t allow you to edit individual sources later, you may need to record the performance again to make the changes you want.
Mackie describes a Loopback mode on the ProFX6v3+ that includes computer audio in the signal being sent.
Choose the mode you want before the performance and make a short test recording while audio is playing on your computer.
The manufacturer’s dimensions don’t tell you how much room plugged-in cables and other work equipment will take up on a shared desk.
Measure the available space where you’ll set up and compare it with the unit, allowing for the cables you’ll need. Yamaha lists the AG06MK2 as 152 × 63 × 201 mm (W × H × D).
Recording without a computer on the Zoom LiveTrak L-8 still requires suitable storage media, an appropriate power supply and a recording setup that works.
Check card compatibility, make a full test recording and play the file back afterwards.
The AG06MK2 is a compact USB mixer for recording to a computer with a pre-set signal.
The ProFX6v3+ is for anyone looking for a compact mixer with a choice of USB recording modes.
The Notepad-8FX combines an analogue control layout with a USB connection for recording to a computer.
The ZEDi-10 is worth considering if you want to combine several microphone or line signals in a computer recording.
The LiveTrak L-8 combines a mixer and USB interface with an SD multitrack recorder.
No, the number of channels alone isn’t enough to tell you. Check which signals can be recorded separately to your computer or card. Allen & Heath lists four USB inputs for the ZEDi-10; Zoom describes separate SD tracks on the LiveTrak L-8. Compare these options with the setup you have in mind.
Connect the microphones you plan to use, check the power supply and recording destination, then make a test recording using your chosen USB settings. Try moving the microphones and listen back to the recording: according to Shure, microphone position affects the stereo image, room sound and tone. A mixer won’t automatically eliminate unwanted room noise.
Check that your existing microphones, cables, headphones and computer connection are compatible with the specific model. For SD recording, you’ll also need suitable storage media. Check that it’s compatible, along with what’s included and the terms of the offer.
Not necessarily. Under Section 77 of the German Copyright Act (UrhG), the exclusive right to record a performance on a sound carrier generally belongs to the performer. Before recording someone else’s performance, make sure you have the necessary rights. Other music rights may also apply if music is used publicly. Whether a particular recording or publication is permitted depends, among other things, on the people involved, the work and how it will be used.
Section 201 of the German Criminal Code (StGB) protects other people’s non-public spoken words from unauthorised audio recording. If conversations might be picked up, check with those involved before recording and take care to avoid capturing them unintentionally. Planning to record a piano performance doesn’t automatically give you permission to record conversations.