Which recording setup is right for you?

Duet with post-production

If you want to balance the two violins separately after playing, check whether the specific USB mode or recorder really records separate signals.

Recording in a classroom with challenging acoustics

If room reverb or background noise could be an issue, try different microphone distances and positions at the recording location. Shure describes microphone placement as a key factor in how much room sound makes it into a recording.

Simple recording or recording without a laptop

If a pre-set combined mix is enough, a two-track USB recording setup may be suitable. If you want to record without a computer running, however, you’ll need a recording function built into the device, such as recording to a memory card.

What should you look for?

For a violin duet in a classroom, your choice mainly depends on whether you need separate tracks, a ready-made USB mix or recording without a computer running. You should also test microphone placement in the room.

What you need What to look for Who is this most important to?
Editing each violin separately Check which signals the selected USB mode or SD recorder actually saves to separate tracks. If I want to adjust the balance between the two violins separately later, I need separate recording signals. Around 36% of consumers have this as their main priority.
Room sound and background noise Test both violins at the recording location, and check whether the microphones need XLR inputs and, if necessary, phantom power. If the classroom is reverberant, I want to try different microphone positions and levels of room sound before recording. Around 29% of consumers want to resolve this question first.
Simple mix over USB Check that there are two microphone inputs you can use at the same time, and what mix the USB signal path sends to the computer. If a duet mix with the levels set in advance is enough for me, I want to be able to start recording on the computer easily. Around 21% of consumers have this as their main priority.
Recording without a laptop Check the built-in memory card recording function, which tracks are saved and what power supply is required. If I don’t want to run a computer in the classroom, I need to be able to record directly on the device. Around 14% of consumers consider this the most important part of their setup.

Avoid common selection mistakes

  • Assuming mixer channels mean separate USB tracks

    The number of inputs doesn’t automatically tell you which signals the USB mode sends separately to your recording software. For example, Mackie describes an interface mode for channels 1 and 2 on the ProFX6v3+, while the Zoom LiveTrak L-8 is documented as recording separate tracks to SD.

    Check which tracks the software or memory card receives for the exact model and mode you’re using, and make a test recording before the duet.

    If your chosen setup doesn’t let you edit individual tracks as needed, you may have to record again or use an additional recorder.

  • Expecting the mixer to fix a reverberant classroom

    Microphone placement and room acoustics affect the signal as it’s recorded. A mixer won’t automatically remove unwanted room sound.

    Try recording both violins together in the actual location, and adjust the microphone distance and position before making the final recording.

    You may need extra microphones or stands, as well as more time, to make test recordings and find the right microphone setup.

  • Assuming a USB connection means you can record without a laptop

    A USB interface and a built-in recorder are different functions. The Tascam Model 12 and Zoom LiveTrak L-8 are both documented as recording to SD cards; that doesn’t mean every USB mixer can record without a computer.

    Check specifically for a built-in recording function, the track format you need and the power supply. Test the complete setup before the duet.

Key brands at a glance

Zoom

The LiveTrak L-8 combines a USB mixer with an SD multitrack recorder, for recording with or without a laptop.

  • Zoom documents separate SD tracks, six microphone preamps and operation using four AA batteries or USB power.
  • Sound On Sound notes, among other things, that the L-8 has limited headphone output for high-impedance models. This limitation doesn’t apply to every device from the brand.

Allen & Heath

The ZEDi-10 is an analogue mixer with microphone/line inputs and a USB interface for recording on a computer.

  • Allen & Heath’s data sheet lists four microphone/line inputs, a 4-in/4-out USB interface, globally switched 48 V phantom power and headphone monitoring.
  • To record two separate signals, you’ll need to configure and test the USB source routing. The device shouldn’t be confused with a mixer that has a built-in SD recorder.

Mackie

The ProFX6v3+ offers a compact USB recording setup for two microphone channels, where choosing the right USB mode is important.

  • Mackie lists two microphone preamps and an interface mode that records channels 1 and 2 without effects.
  • According to the manufacturer, standard and loopback modes capture different signal combinations. Check which mode suits your duet mix before recording.

Yamaha

The AG06MK2 is designed for two microphones and two-track USB recording when a pre-set mix is all you need.

  • Yamaha documents two condenser microphone inputs that can be used at the same time, and two-track USB recording at 24-bit/192 kHz.
  • This doesn’t confirm freely assignable multitrack recording of every mixer channel. Choose the loopback mode that matches the content you want to record.

Tascam

The Model 12 combines a mixer, USB interface and SD multitrack recorder, making it possible to record without a laptop running.

  • Tascam documents a built-in 12-track recorder and a USB interface with 12 inputs and 10 outputs.
  • For SD recording, Tascam specifies a maximum of 48 kHz and 24-bit. It offers more features than you need for a simple duet mix.

Products to suit your needs at Joybuy

Related products coming soon.

Frequently asked questions

Are two microphone inputs enough to record each violin separately?

No. Two inputs alone don’t guarantee separate recordings. Also check which signals the selected USB mode or card recorder saves to separate tracks. Mackie describes an interface mode for channels 1 and 2 on the ProFX6v3+; Zoom documents separate SD tracks on the LiveTrak L-8.

Do microphones for violins need phantom power?

It depends on the microphone. Shure specifies phantom power for the SM137, SM81 and KSM137 models recommended for use on stands. Check what your specific microphones need and whether the mixer can provide the required power.

How should I test the classroom before recording?

Make a test recording of both violins in the actual location, adjusting the microphone distance and position until the instruments and room sound suit your recording. Shure explains that the right position depends on the balance you want between the instrument and the room sound.

What should I bear in mind when shopping online in case something is faulty?

For a new item bought from a trader, consumers in the EU are generally entitled to a minimum two-year legal guarantee if the product is faulty. Your Europe explains this EU consumer protection rule. Check who the seller is, particularly if the school is buying rather than an individual.

Can I simply record and publish a violin duet in a lesson?

There’s no general answer without knowing who’s involved, what’s being recorded and how it will be used. If personal data is processed, there must be an appropriate legal basis. Consent is one possible basis, but it isn’t the only one, as explained by the Federal Commissioner for Data Protection and Freedom of Information. Section 201 of the German Criminal Code concerns unauthorised recording of another person’s non-public spoken words and may be relevant if classroom conversations are recorded. Before recording or publishing, check with the school who will be captured and which legal basis applies.