Which video light is right for you?

Filming glossy puzzle surfaces

You film pieces and hands from above and need to control reflections and shadows that obscure the image. Light diffusion and an adjustable position to the side matter more than a single wattage figure. Canon Europe describes using key and fill lights to control shadows; Adobe explains how diffused light affects harsh shadows and bright highlights.

Filming the whole puzzle

You want to show the puzzle right to the edges of the frame and capture the colours of the pieces faithfully under your existing room lighting. So compare the whole shot, not just the centre of the frame. Canon Europe notes that white balance may need adjusting in challenging lighting conditions to achieve the desired image.

Filming at a small or changing workspace

You often move your filming setup or mainly record close-ups. In that case, mounting, power and clear workspace matter just as much as the light itself. Check what’s included and whether you can safely position the light where you want it alongside your camera and hands.

What should you look for when buying?

Canon Europe describes using a key light and, where needed, a weaker fill light to control shadows; Adobe explains that diffused light can soften harsh shadows and strong highlights. With glossy pieces, the result also depends on the angle at which the light hits the surface.

What matters What to check before buying Who it matters most to
Reflections and shadows from your hands Diffuser and adjustable mount; record a test shot with your hands moving, from the final camera position. If I film glossy pieces from above, I want to control reflections and shadows from my hands in the finished image. Around 28% of consumers put this control first.
Coverage of the puzzle surface Puzzle size, framing, distance and light position; compare the centre and edges in the same clip. If the whole puzzle stays in frame, I want the pieces at the edges and my movements to be easy to see too. Around 22% of consumers put full-surface coverage first.
Flicker and banding Record a test clip with your planned light sources and dimmer settings; check possible camera settings with your actual setup. If I film under artificial light, I don’t want distracting bands in my video. Around 22% of consumers put a band-free image first.
Clearly distinguishable colours Check colour temperature and model-specific colour-rendering specifications; test the white balance with your existing room lighting. If similarly coloured pieces need to remain distinguishable in the video, I look for a good match between the lighting and camera. Around 17% of consumers put consistent piece colours first.
Mounting and power Check the table edge, mount, cable routing, power source and what’s included with the specific model. If my table has little space or I move between filming locations, I want to mount the light securely and power it appropriately. Around 11% of consumers put a space-saving setup with a suitable power supply first.

Common selection mistakes

  • Comparing only wattage or a maximum lux figure

    Aputure gives different illuminance figures for the amaran 60x S depending on distance and whether a reflector is used. These figures don’t show how evenly your puzzle will be lit.

    Only compare figures measured under the same conditions, and check the whole puzzle in the frame before judging suitability based on a single number.

  • Assuming “flicker-free” guarantees a perfect camera image

    Banding can depend on how the light source interacts with your camera settings. So an advertising claim doesn’t automatically tell you what your specific clip will look like.

    Record a test clip using your intended camera, shutter speed, room lighting and dimmer setting, and check the settings you plan to use.

  • Choosing a light without checking what’s included

    The Elgato Key Light Air MK.2 doesn’t include a power supply according to its packing list. NEEWER doesn’t list a stand or NP-F battery as included with the RGB660 PRO II.

    Check the packing list for the specific model against your table edge, power source and preferred light position.

Key brands to consider

Godox

The P260C Pro is a bi-colour panel for a larger, adjustable tabletop setup.

  • Godox specifies a diffuser and an adjustable range of 2800–6500 K for this model. The claim that it produces softer light comes from the manufacturer.
  • Check the weight, mount and power source for the specific version on offer; test reflections and coverage with your camera.

Elgato

The Key Light Air MK.2 is designed to be mounted on a suitable table edge.

  • Elgato specifies a clamp for desks up to 6 cm thick and a mounting height of 60–88 cm.
  • According to Elgato, maximum stated light output requires at least 27 W of input power; the packing list doesn’t include a power supply.

Ulanzi

The VL81 is a compact option for close-ups and setups you move frequently.

  • Ulanzi specifies a built-in battery and a 1/4-inch thread.
  • For coverage of a full puzzle, check the lighting effect and battery life at your intended distance; you’ll need to allow for a suitable mount separately.

Aputure / amaran

The amaran 60x S is a bi-colour COB light designed for setups with a suitable light modifier.

  • Aputure specifies adjustable white light from 2700–6500 K and active cooling; illuminance figures are given for different distances and reflector setups.
  • The manufacturer’s figures don’t confirm how well a particular softbox will light your setup, or how much noise the light will make in your audio recording. Test both with the setup you plan to use.

NEEWER

The RGB660 PRO II is a panel with adjustable white light and additional RGB features.

  • NEEWER specifies a diffuser and an included mains adapter.
  • According to the manufacturer, NP-F batteries and a stand aren’t included. The manufacturer’s flicker-free claim is no substitute for testing with your camera.

Joybuy product selection

This selection includes compact video lights for mobile close-ups, as well as COB models that let you incorporate light modifiers into your setup.

MOMAN PC8 RGB camera light

MOMAN PC8 RGB Camera Light

This portable model could suit close-ups on the move; check how it lights your entire puzzle surface in the camera frame.

Portable RGB LED video light. At full power, the stated battery life is up to 80 minutes.

View at Joybuy
COLBOR 200W LED video light with bi-colour and Bowens Mount

COLBOR 200W LED Video Light, Bi-Color 2700K–7000K, Bowens Mount

The Bowens mount is useful for a setup with a compatible light modifier; check that the accessory you need will give you the lighting effect you want.

200 W; Bi-Color 2700K–7000K; COB light with Bowens Mount and built-in power supply.

View at Joybuy
COLBOR 60W LED video light with built-in 59 Wh battery

COLBOR 60W LED Video Light, 59Wh, Bi-Color 2700K–6500K

The built-in battery could be useful for a mobile setup; check whether the stated battery life suits your planned recording time.

60 W; built-in 59 Wh battery; Bi-Color 2700K–6500K. One hour of battery life is stated at maximum brightness; a 20 V/3 A charger is specified for PD power.

View at Joybuy
Ulanzi VL49 RGB LED video light

Ulanzi VL49 RGB LED video light

This compact model is designed for close-ups and macro shots on the move; check how it performs if you want to show the whole puzzle.

2000 mAh battery; dimmable light from 2500–9500 K; magnets on the back.

View at Joybuy
Rollei LUX Compact RGB LED Light 8W

Rollei LUX Compact RGB LED Light 8W, Bi-Color, App Control

This compact model is an option for a mobile setup; compare its lighting effect at your intended distance with your planned framing.

8 W; RGB with 360 colours; Bi-Color; app control. Battery life of around 80 minutes is stated at full power.

View at Joybuy

Frequently asked questions

How should I position the light so my hands don’t cast shadows over all the pieces?

Try a diffused key light to the side of the camera. If the opposite side is too dark, a weaker fill light there can reduce shadows; check both sides and any glossy pieces from the final camera angle.

What should I test first if I see banding in video under artificial light?

Record a short clip with the lights and dimmer settings you plan to use. For regions with a 50 Hz power supply, Sony lists 1/50 s or 1/100 s as possible shutter speeds; the setting that works depends on the camera and light source.

How can I check whether a light covers the whole puzzle?

In a test shot, compare the centre and edges of the frame using your planned framing and light distance. You can’t apply a single illuminance figure to coverage of your puzzle surface without knowing the conditions under which it was measured.

How can I get more consistent colours under mixed room lighting?

Match the light’s adjustable colour temperature to the existing lighting and check your camera’s white balance with a test clip. A Kelvin figure alone doesn’t guarantee accurate colour reproduction.

What should I check when buying an electric video light in Germany?

When monitoring lighting products on the market, the German Federal Network Agency checks matters including correct CE marking, an identifiable product, manufacturer details and the required German instructions and warnings. According to the European Union, CE marking is required only for products covered by relevant harmonised legislation that requires it.