Which light is right for you?

Weavers looking to reduce hand shadows

If you film by a window but shadows obscure what your hands are doing, try a reflector on the shadow side first. Canon Europe points out that the direction and quality of natural light can change.

Weavers who want to show off yarn colours

If you want similar shades to remain distinguishable in your video, check the yarn in a test clip and set the white balance to match the actual lighting. Canon Europe and Nikon explain that white balance should match the available light or a mix of light sources.

Weavers with a changing or cramped filming space

If you regularly clear your table or film close-ups, check how the light attaches and how it is powered. Ulanzi lists a battery and several mounting options for the VL81, while Elgato describes the Key Light Air MK.2 as a panel with a desk clamp.

What should you look for when buying?

Start by filming a clip in your usual window light. Then decide whether your main priority is to soften shadows, balance colours, light a larger area or keep your setup compact.

Priority What to check when buying Who is this important to?
Hand shadows Reflector position or dimming; check the light on the shadow side in a test clip. When I film what my hands are doing, I want to see my hands and threads clearly despite shadows from the window. Around 40% of consumers prioritise fill light.
Yarn colours Test with your own yarn; for bi-colour light, check the adjustable colour temperature range. If similar yarns need to be distinguishable in the video, I want to assess the lighting and white balance in the finished image. Around 30% of consumers prioritise how their yarn colours look.
Larger weaving area Allow space for a tripod and light modifier; compare lux figures only when the distance and setup are the same. If I want the whole loom in the shot, I need room to adjust the light position and shape the light. Around 20% of consumers focus mainly on lighting a larger area.
Compact setup Check how it attaches to your existing setup, and test the brightness and battery life across the frame you need. If I often clear my workspace or film close-up details, I want to be able to reposition the light easily. Around 10% of consumers prefer a small setup that can be packed away quickly.

Common misconceptions

  • Assuming one lux figure tells you how bright the light will be on your loom

    Aputure publishes measurements for the amaran 100x S at different distances, with and without the Hyper Reflector. These figures do not automatically show how well a softbox will light your subject.

    Only compare measurements taken at the same distance and with the same equipment specified. Also check which light modifier and tripod you will need for your setup.

  • Assuming a high colour-rendering rating means your yarn colours will look right

    Window light and artificial light can mix, and white balance affects how colours appear in your video.

    Film your yarn under the lighting you plan to use, then assess the clip with a white balance suited to that lighting.

  • Assuming a small battery-powered light will cover your whole loom

    A compact design and a choice of mounting options do not prove that a small light will adequately illuminate the entire weaving area.

    Test the full frame and the recording time you need before settling on a compact setup.

Brands to consider

NEEWER

The NL660 bi-colour panel is worth considering if you want to brighten a specific work area.

  • NEEWER lists a colour temperature range of 3200–5600 K and dimming for the NL660; the manufacturer says a mains adapter is included.
  • An NP-F battery is not included. A tripod is only included with the relevant single-light version.

amaran

The 100x S is a bi-colour COB light for setups where you want to shape the light precisely.

  • Aputure lists a colour temperature range of 2700–6500 K for the 100x S, along with separate lux measurements with and without the Hyper Reflector.
  • These manufacturer figures do not show how the light will illuminate your loom with a softbox. Check the measurement conditions and the accessories you will need.

Ulanzi

The compact VL81 may suit close-ups or a work table that needs to be cleared often.

  • Ulanzi lists a 3000-mAh battery, dimming, a hot shoe and a 1/4-inch thread for the VL81.
  • These features do not tell you whether the light will cover an entire weaving area; check the full frame.

Elgato

The Key Light Air MK.2 combines a panel with a desk clamp, making it a possible fit for a permanent workspace with a suitable clamping point.

  • Elgato lists a colour temperature range of 2900–7000 K and notes that maximum brightness depends on the USB-C power supply.
  • The technical specifications state that a mains adapter is not included. Check that the edge and height of your table suit your weaving setup.

SmallRig

The RC 60B Lite Edition combines a compact COB design with battery power.

  • For this Lite Edition, SmallRig advertises 60 W, USB-C PD power and CRI 97+.
  • These are manufacturer claims, not proof of how your yarn colours will look. Check the specific version and any accessories you need separately.

Suitable products on Joybuy

Suitable products coming soon.

Frequently asked questions

How can I check whether an additional light shows my yarn colours more accurately?

Film the same yarn in window light, then again with the additional lighting you plan to use. Assess both clips with a white balance suited to each lighting setup. A Kelvin range or CRI rating alone cannot show how your yarn colours will look in your video.

How can I prevent banding or flicker in my video?

Record a short clip with your camera and the brightness setting you plan to use. Sony explains that flickering light sources can cause banding in certain recording conditions. Check which shutter speed or anti-flicker settings are available for your camera model, rather than assuming a light is flicker-free across the board.

Which extra items should I check for my setup?

Check what is included with the specific version: a tripod is only included with certain versions of the standalone NEEWER NL660, and an NP-F battery is not included. The technical specifications for the Elgato Key Light Air MK.2 do not list a mains adapter as included. Also check which power supply, mount and, if needed, light modifier will suit your setup.

What should I check for product safety when buying an electric video light in Germany?

The German Federal Network Agency lists CE marking, product identification and correct manufacturer details among the points checked during market surveillance. Which EU rules apply to a particular model depends on its design. The European Union explains that CE marking is only required for products covered by relevant EU rules that require it.

Who should I contact if the light is faulty after purchase?

If a product is faulty, the seller is generally responsible for the statutory guarantee. The consumer advice centre in Germany states that for consumer goods purchases, this lasts for two years from delivery; a voluntary manufacturer’s warranty is separate.