Which type of light is right for you?

Craft makers who focus on detail

If you’re photographing fibres, embossed details or other fine textures, the key is to match the angle and softness of the light to your subject. Adobe explains how direct light can create hard shadows and strong highlights.

Creators working with transparent subjects

With translucent or glossy elements, you’ll need to decide whether backlighting or visible reflections will create the effect you want. broncolor distinguishes between light passing through a transparent object and light revealing its surface.

Photographers working at a small table

When there’s little room left for anything beyond your camera and decorations, mounting, the stand and the light modifier matter just as much as the light itself. NEEWER and Elgato describe different panel and mounting options for setups like these.

What should you look for when buying?

First, decide what kind of look your subject needs. Then check that the light’s colour and space requirements suit your actual setup.

What matters What to check before buying Who it matters most to
Bringing out fine texture Side positioning and adjustable diffusion; compare the same surface under different lighting angles. If I want to show fibres or embossed details, I need directional light without making distracting shadows too prominent. Around 33% of consumers mainly value being able to see surface texture.
Controlling reflections and backlighting Try positioning the light behind or to the side of the subject; assess reflections from the camera angle you intend to use. For glossy or translucent pieces, I want to control reflections and check whether light passing through the material creates the effect I’m after. Around 27% of consumers are mainly concerned with controlling reflections and backlighting.
Getting material colours right Check the colour temperature and the model’s stated colour-rendering specifications; take a reference shot using your actual setup. If I want the colours of my craft materials to look true to life, I’ll match the light colour and white balance. Around 20% of consumers prioritise how their materials are rendered.
Working in a limited space Check the available space, mounting options, power supply and what’s included with the specific version. If my workspace is small, the light needs to fit alongside my subject and camera. Around 20% of consumers are particularly concerned with keeping their setup compact.

Common misconceptions about video lights

  • Assuming lux figures with a reflector apply to a softbox

    Manufacturer figures for illuminance are based on specific light modifiers and distances. Godox gives figures for the SL60IIBi with a standard reflector at 1 m; Aputure lists separate figures for the amaran 100x S with the light alone and with the Hyper Reflector.

    Only compare illuminance at the same distance and with the same type of light modifier. Test your complete setup directly on your subject.

    A COB setup may also need a compatible light modifier and, in some cases, a stand.

  • Assuming softer light will always show more detail

    Diffusion softens hard shadows, but it can also reduce the shadows that make raised details visible. Adobe explains the difference in contrast between direct and diffused light.

    Before choosing a setup, photograph the same surface from different side-light positions and with varying levels of diffusion.

  • Assuming the product name means it comes as a complete kit

    For the NEEWER NL660, the manufacturer offers a ‘NL660 only’ version and a version with a stand; NP-F batteries are not included, according to the manufacturer.

    Check the packing list for the specific version and make sure you have enough space and the right power supply.

    Depending on the version, you may need to buy a stand or NP-F battery separately.

A guide to relevant brands

Godox

The SL60IIBi is an example of a directional bi-colour COB continuous light, for when you’re planning to shape the light and build a separate setup.

  • Godox lists 2800–6500 K, a Bowens mount and dimmable light output.
  • The advertised output of up to 25.100 lx at 1 m is with the standard reflector, not necessarily with a softbox. Godox recommends using the SL60IIBi in a dry, well-ventilated setup and warns that some parts can get hot.

NEEWER

The NL660 is a bi-colour panel that may suit a setup where the light and included diffuser are all you need.

  • NEEWER lists 3200–5600 K, CRI ≥96, a mains adaptor and a diffuser.
  • A stand is only included with the version specifically listed as having one; NP-F batteries are not included, according to the manufacturer. These are manufacturer specifications, not independent test results.

Elgato

The Key Light Air MK.2 is a desktop panel for a compact, permanent workspace.

  • Elgato lists a desk clamp, 2900–7000 K and USB-C power.
  • The advertised output of up to 2100 lumens depends on the power source. Lumens and the lux figures of other lights aren’t directly comparable as a measure of the light reaching your subject.

amaran

The amaran 100x S is an example of a bi-colour COB light for a separately planned lighting setup.

  • Aputure lists 2700–6500 K, CRI 95 and active cooling for this model.
  • Published illuminance figures distinguish between the light without a modifier and the Hyper Reflector. They don’t tell you how it will perform with a different softbox.

Joybuy products for product photography

This selection of Joybuy products includes compact lights, COB models and effect lighting for product photography. For delicate window decorations, check that the light position and the effect you want are right for your subject.

COLBOR 60W RGBCW COB video light with 59 Wh battery

COLBOR 60W RGBCW COB video light, 59 Wh, 2700–6500 K

A COB option for adjusting the colour and setup to suit your product shot; check which light modifier is right for your subject.

Bi-colour and full-colour light; built-in 59 Wh battery. According to the product description, it can be powered by the battery, a PD charger or a DC input.

View at Joybuy
ULANZI VL49 RGB video light

ULANZI VL49 RGB video light, 2000 mAh, 2500–9500 K

A compact option for product and macro photography when you want to adjust the light colour.

The product title lists a 2000-mAh battery, dimmable light, 2500–9500 K and a magnetic back.

View at Joybuy
Photoolex Gobo Light 10W with light patterns

Photoolex Gobo Light 10W, 19 gobos, 4 colours

An effect light for when you want patterns to be part of the image; check whether the projection suits the fine surface of your decoration.

The product description lists 19 gobos, four light colours, an adjustable beam angle of 58–90°, dimmable light and a diffuser.

View at Joybuy
Ulanzi VL120RGB LED light in black

Ulanzi VL120RGB LED light, black

A compact light for product photography when you want to adjust brightness and colour.

The product description lists 120 LEDs, a built-in rechargeable battery, adjustable brightness and 2500–9000 K, as well as a cold shoe mount.

View at Joybuy
Ulanzi VL119 Handheld Video Light 10W

Ulanzi VL119 handheld video light 10W, RGB light wand, 3300 mAh

A portable light wand for product photography when you want to position the light by hand.

The product title lists a 3300-mAh battery and an adjustable colour temperature of 2500–9000 K.

View at Joybuy

Frequently asked questions about video lights for window decorations

Should I use the softest possible light to photograph fine details?

Not necessarily. Diffusion can soften hard shadows and highlights, but it can also make texture less visible. Change the position of the side light or reduce the diffusion, then compare test shots of the same subject.

How should I get started with a translucent window decoration?

As well as trying light from the front, position it behind or to the side of your subject. With transparent objects, backlighting and reflections from the surface offer different creative options. Assess the result from your camera angle.

How can I avoid colour shifts in craft materials?

Match the light colour and white balance to your actual setup, and take a reference shot. Canon Europe describes white balance as a setting that helps you achieve the colour rendering you want; a Kelvin figure alone won’t show you how your photo will look.

Will any softbox fit any video light?

No. Godox lists a Bowens mount for the SL60IIBi, while the NEEWER NL660 is described as a panel with its own diffuser. If you’re buying a softbox separately, check that its mount is compatible with your exact light model and confirm what’s included.

What should I check when buying an electric video light in Germany?

Check the information and documentation supplied with the specific light and, where applicable, its power supply. According to the European Union, CE marking applies to products covered by certain harmonised EU rules; it is not an independent quality mark. The Bundesnetzagentur lists product identification, manufacturer details, required German-language instructions and declarations of conformity among the points checked during market surveillance. The rules that apply depend on the specific product.