Which lens types are right for you?

Collectors looking for the full view

You want to capture a vintage camera in full, including its shape and controls, on a small table. The angle of view and camera position matter more than maximum magnification. CHIP also points out that the lens mount and sensor need to be compatible with your camera.

Photographers capturing engravings

You want to show lettering, dials and signs of wear in close-up. Compare the maximum magnification and check how much room there is in front of the lens for lighting; Nikon says the Z MC 50 mm leaves around 5 cm between the lens and subject at its closest focusing distance.

Photographers with a controlled tabletop setup

You want to capture several planes of a three-dimensional camera in sharp focus, and can control the subject, lighting and camera position for stable shots or focus stacking. Canon Academy explains that focus stacking combines several images taken with different focal planes.

What should you look for when buying?

For a full view, start by checking whether the framing works from your available camera position. For close-ups, magnification and working distance matter too.

Shorter standard or moderate wide-angle macro lens

Suitable if: You mainly want to show the whole camera, but would also like to move in closer from time to time. Canon lists a maximum magnification of 1:2 for the RF 35mm F1.8 IS Macro STM; Nikon lists 1:1 for the Z MC 50 mm, as does Sony for the FE 50 mm F2,8.

Bear in mind: The framing also depends on the sensor format and camera position. Nikon says there’s around 5 cm between the front of the lens and the subject at the closest focusing distance with the Z MC 50 mm.

90–105-mm macro lens for details

Suitable if: Small engravings or controls are your main focus, and you want to plan your lighting around the subject. Tamron, Sigma and Nikon each list a maximum magnification of 1:1 for their respective models.

Bear in mind: Check whether you can frame the whole camera from your available position; a narrower angle of view may mean you need more space behind the camera.

More than 1:1 for very small details

Suitable if: Tiny lettering is your main subject and the lens is compatible with your camera system. Canon and Sony list a maximum magnification of 1.4x for their respective 100-mm models, while OM SYSTEM lists 2x for the M.Zuiko Digital ED 90mm F3.5 Macro IS PRO.

Bear in mind: Higher magnification won’t necessarily help when you want to show the whole camera. At high magnifications, you may need focus stacking to keep several planes in sharp focus.

CHIP highlights the importance of matching the lens mount and sensor to your camera. Before buying, check compatibility and compare the framing and working distance at the magnification you actually plan to use.

Your priority What to check when buying Who is this important for?
Whole camera on a small table Check the mount, sensor format and focal length together; consider the framing from your planned camera position. If I want to show the whole camera, including its controls, it needs to fit fully in the frame from the position available. Around 33% of consumers put this framing first.
Engravings and controls Check the maximum magnification of the compatible model; Canon lists 1:2 for the RF 35mm F1.8 IS Macro STM and Nikon lists 1:1 for the Z MC 50 mm. For small lettering, I want enough magnification without overlooking the need for a compatible mount. Close-up magnification is the priority for around 27% of consumers.
Room to light the subject from the front Check the distance between the front of the lens and the subject at your planned magnification, not just the minimum focusing distance; Nikon says the Z MC 50 mm leaves around 5 cm at its closest focusing distance. If I want to direct light onto the body or engravings from the side, I need enough clear space in front of the lens. Around 20% of consumers prioritise room for lighting.
Sharpness across several planes Check whether a stable setup and, if needed, focus stacking will work with your shooting and editing process. With a three-dimensional camera, I want to show several planes in sharp focus and can control the shooting process to do so. Around 20% of consumers place the greatest importance on consistent sharpness.

Avoiding common misconceptions

  • “Macro” always means the same magnification

    Maximum magnification varies between models: Canon lists up to 1:2 for the RF 35 mm, Nikon lists 1:1 for the Z MC 50 mm, and OM SYSTEM lists 2x for its 90-mm model.

    Compare the maximum magnification stated for the complete model with the size of the engravings or controls you want to photograph.

  • A long macro lens is automatically suitable for every shot

    When photographing a whole vintage camera, the space behind the camera on a small table can be a limiting factor. Higher magnification won’t necessarily improve the framing for a full view.

    First plan the full frame, taking the sensor format and camera position into account, then check how well the lens works for close-ups.

  • The minimum focusing distance is the clear space in front of the lens

    The minimum focusing distance and the distance between the front of the lens and the subject are two different measurements. Nikon lists a minimum focusing distance of 0.16 m for the Z MC 50 mm, with around 5 cm between the lens and subject at its closest focusing distance.

    Check the actual clear space in front of the lens at the magnification you plan to use.

  • Image stabilisation alone keeps the whole camera in focus

    Stabilisation can reduce camera movement, but it won’t automatically bring several planes at different distances into focus at the same time. Canon Academy describes focus stacking as combining a series of images with different focal planes.

    Check whether a stable setup and, if needed, focus stacking would work better for your subject.

    Focus stacking means taking extra shots and editing them afterwards; you may also need a stable setup.

Key brands and macro options

Canon

Canon offers macro lenses with different maximum magnifications for compatible EOS R cameras.

  • Canon lists a maximum magnification of 1:2 for the RF 35mm F1.8 IS Macro STM and 1.4x for the RF 100mm F2.8L Macro IS USM.
  • The 35-mm model offers less magnification; with the 100-mm model, you’ll need to make sure the framing works for the whole camera in your available setup.

Nikon

For compatible Z cameras, Nikon lists a maximum magnification of 1:1 for both the Z MC 50 mm and the Z MC 105 mm VR S.

  • Nikon lists lens stabilisation for the Z MC 105 mm VR S.
  • Nikon says the Z MC 50 mm leaves around 5 cm between the front of the lens and the subject at its closest focusing distance. Whether the 105-mm model works for the whole camera depends on the space available.

Sony

For compatible E-mount cameras, Sony offers the FE 50 mm F2,8 Macro and the FE 100 mm F2.8 Macro GM OSS.

  • Sony lists a maximum magnification of 1:1 for the 50-mm model and 1.4x for the 100-mm model; according to Sony, the 100-mm model has optical stabilisation.
  • Sony says the FE 50 mm is designed for full-frame and APS-C cameras; the angle of view varies with the sensor format.

Tamron

According to Tamron, the 90mm F/2.8 Di III MACRO VXD is available for compatible Sony E and Nikon Z cameras.

  • Tamron lists a maximum magnification of 1:1 for this model and says it is designed for full-frame mirrorless cameras.
  • Choose the Sony E or Nikon Z version separately, according to the mount on your camera.

Sigma

According to Sigma, the 105mm F2.8 DG DN MACRO | Art is available for Sony E and L-Mount.

  • Sigma lists a maximum magnification of 1:1 for both versions.
  • The listed weights vary: Sigma gives 710 g for Sony E and 715 g for L-Mount. Bear the weight of the model you choose in mind when setting up on a small table.

OM SYSTEM

The M.Zuiko Digital ED 90mm F3.5 Macro IS PRO is an option for a compatible OM SYSTEM camera system.

  • OM SYSTEM lists native 2x magnification and a 35-mm-equivalent angle of view of 180 mm.
  • Its high magnification and narrow angle of view aren’t necessarily an advantage when photographing a whole vintage camera in a small space.

Products at Joybuy

Similar products coming soon.

Frequently asked questions

Do I need a 1:1 magnification ratio to photograph the whole vintage camera?

No. First, check whether you can frame the whole camera as you want from the position available. Canon lists a maximum magnification of 1:2 for the RF 35mm F1.8 IS Macro STM; a higher ratio may be more important for small engravings.

Is the minimum focusing distance the clear space in front of the lens?

No. Check the distance between the front of the lens and the subject separately. Nikon lists a minimum focusing distance of 0.16 m for the Z MC 50 mm, with around 5 cm between the lens and subject at its closest focusing distance.

How can I keep the front and the controls further back in focus?

Make sure the camera and subject are stable. If one shot doesn’t provide enough depth of field, you can combine several images taken with different focal planes into a focus stack. Check that your camera and editing software support this. Canon Academy describes this technique as focus stacking.

What costs and consumer rights should I bear in mind after buying a lens?

Before buying, check whether your setup also requires a tripod, lighting or editing. If the product is faulty, your statutory rights against the seller are separate from any voluntary guarantee. The Verbraucherzentrale explains that the first step is generally to ask the seller to put things right.

Can I return a lens bought online in Germany?

For a consumer contract made online, you generally have a 14-day right to cancel; the Verbraucherzentrale says that, for ordered goods, the period starts when you receive them. Tell the other party to the contract that you wish to cancel, and check the requirements and any exceptions that apply to your specific purchase.