Which setup is right for you?

Detail collectors

If you want to capture embossing, signs of wear or small markings, check how well the specific lens performs at close range. Canon states that the RF-S 18–45 mm offers a maximum magnification of 0.25x in manual close-focus mode; several manufacturers specify 1:1 for certain macro lenses.

Catalogue creators

For repeated shots of whole pin badges, a stable setup and consistent framing are useful. Canon recommends using a tripod for consistent product shots; Nikon advises using even lighting and setting the white balance before you take the picture.

Beginners with limited table space

If you want to start with a straightforward setup, a close-focusing kit zoom could be a good place to begin. Test it on your smallest subject to see whether the supplied lens can focus closely enough for the framing you want before considering a separate macro lens.

What should you look for when buying?

First, consider how large you want the smallest details to appear in the image. Then assess the size of the lens, focusing options and the space available for a stable setup and lighting.

What you need What to check when buying Who this matters most to
Magnify small details Check the maximum reproduction ratio and close-focus mode of the specific lens; assess the framing using your smallest subject. If you want to capture tiny embossing or markings clearly, the lens’s close-focus performance is crucial. Around 36% of consumers prioritise magnifying details.
Keep raised details sharp throughout Check whether the exact camera model supports focus bracketing and allow space for a tripod; focus stacking requires several shots to be combined. For stationary pin badges with details at different heights, a focus stack can help cover multiple focal planes. Around 29% of consumers prioritise sharpness throughout.
Control colours and reflections Check whether there’s room on the table for light sources and whether you can set the white balance under consistent lighting. If you want to compare colours across repeated shots and assess reflections on shiny surfaces, lighting and white balance are important. Around 21% of consumers focus on this.
Start with a straightforward kit Check what’s included, which lens comes with it and its close-focus mode; don’t assume a body-only offer is the same as a kit. If you want to start by photographing whole pin badges and avoid unnecessary extra lens purchases, make sure the kit includes the right combination. Around 14% of consumers prioritise an easy start.

Common buying and photography mistakes

  • Assuming a zoom kit is the same as a 1:1 macro lens

    A kit zoom may be suitable for whole pin badges, but it won’t automatically offer the same magnification as a dedicated macro lens. Canon specifies a maximum of 0.25x for the RF-S 18–45 mm in manual close-focus mode; certain macro lenses are specified as 1:1.

    Compare the reproduction ratio and the shooting mode it applies to for the specific lens on offer with the framing you need for your smallest subject.

    If the close-focus performance isn’t enough, you may need to buy a separate macro lens later.

  • Assuming a camera body is a complete photography kit

    A body without a lens isn’t ready to use. Panasonic lists the DC-G97 as a camera body, so you’ll need to account for a compatible lens when choosing your setup.

    Before comparing offers, check what’s included and whether the lens and mount are compatible with your planned setup.

    An extra lens, and possibly a tripod and lighting, can take up more room on your table.

  • Relying on megapixels instead of planning your focus and lighting

    At close range, the area in focus becomes small. Canon describes this effect in macro photography; Nikon highlights the importance of even lighting and setting the white balance in advance for consistent colours.

    Test raised details and shiny surfaces under your planned lighting, and check whether your camera model supports focus bracketing before making a decision based solely on sensor resolution.

    Repeatable shots may take time to achieve, with test photos and adjustments; lighting and a tripod also need extra space.

A guide to relevant camera brands

Canon

The EOS R50 is offered with the RF-S 18–45 mm as a zoom kit, and Canon lists focus bracketing as a feature of the EOS R50. The RF 100 mm F2.8 L Macro is a separate lens that’s compatible with the EOS R50.

  • Canon specifies a maximum magnification of 0.25x for the RF-S 18–45 mm in manual close-focus mode.
  • This figure applies to that lens in the specified mode, not to every Canon kit. Canon states that the RF 100 mm F2.8 L Macro reaches 1.4x; it’s a separate lens option.

Panasonic LUMIX

The DC-G97 is a Micro Four Thirds camera body. Panasonic lists the H-HS030 as a separate Micro Four Thirds macro lens.

  • Panasonic specifies a 1:1 reproduction ratio for the H-HS030.
  • Check whether the lens is included in the specific offer and how much room the camera and lighting will need on your table.

Fujifilm

The X-S20 is a mirrorless APS-C camera. Fujifilm describes the XF30mmF2.8 R LM WR Macro as a compact macro lens.

  • Fujifilm specifies a 1:1 reproduction ratio for the XF30mmF2.8.
  • The XF30mmF2.8 is a prime lens, so you can’t adjust the framing with a zoom; it isn’t automatically included with every X-S20 offer.

Sony

The α6700 is an APS-C body with an E-mount. Sony lists the FE 90 mm F2.8 Macro G OSS as compatible with E-mount APS-C cameras.

  • Sony specifies a 1:1 reproduction ratio and optical stabilisation for the FE 90 mm F2.8 Macro G OSS.
  • Check the framing and space needed for this specific setup on your table. Stabilisation can’t replace a steady setup when focus stacking.

Suitable products at Joybuy

Similar products coming soon.

Frequently asked questions

Do I need a 1:1 macro lens for every pin badge?

No, not necessarily. First, check whether the close-focus performance of the specific lens gives you the framing you want for your smallest pin badge. A 1:1 macro lens offers different magnification capabilities from the Canon RF-S 18–45 mm, for which Canon specifies a maximum of 0.25x in manual close-focus mode.

How can I set up repeatable shots on a small table?

Set up the camera and subject securely for your test shots, and keep the framing consistent. Check the lighting and white balance. If you want details at different heights on the pin badge to appear sharp, check whether your specific camera model supports focus bracketing.

What extra purchases should I budget for?

Compare body-only and kit offers by checking which lens is actually included. Depending on the framing and setup you want, you may also need a separate macro lens, a tripod or lighting.

What are my rights when buying online, and what happens if my camera is faulty?

When you buy online from a business seller in the EU, you generally have a 14-day right to cancel, although exceptions apply and you should check when the cancellation period starts. Faulty goods are covered separately by the statutory guarantee: Your Europe explains that purchases in the EU are covered for at least two years from the date you receive the goods. This is separate from any additional manufacturer’s warranty.

How should I dispose of an old camera and removable batteries?

According to the Federal Environment Ministry, electrical waste must be taken to an authorised collection point. Remove any old, removable batteries before disposing of the device and take them to a separate collection point.