Who this guide is for

Recording the duet as a stereo ensemble

If you want to record both violins together with a controlled amount of the hall’s sound, a straightforward setup with two microphone channels is enough to get started. Yamaha Music and DPA Microphones explain how microphone distance and orientation affect the stereo image.

Recording separate tracks in a reverberant hall

If you want to edit the violins separately later, try placing the microphones closer and record each signal to its own track. Shure points out that a microphone can’t simply separate direct sound from reflected sound.

Recording on the move with additional microphones

If you want to record additional microphones alongside the violins, each on a separate track, make sure you have enough dedicated microphone preamps, as well as suitable power and monitoring at the recording location.

What to look for when buying

Two microphones as a stereo pair

A good fit if: You want to record the duet as an ensemble with a shared sense of space, and don’t plan to use more than two microphones.

The trade-off: With a combined stereo recording, you’ll have less freedom to adjust the balance between the violins and the amount of room sound separately afterwards.

Two separate microphone tracks

A good fit if: You want to edit the parts separately later or place the microphones closer to the violins.

The trade-off: Use a test recording to assess microphone bleed and the effect of the hall’s layout; the interface won’t remove reverberation.

Four microphone preamps

A good fit if: You want to record a separate pair of room microphones on their own tracks as well as the microphones for the players.

The trade-off: Additional microphones mean more equipment to set up. With the Audient EVO 8, phantom power for all four channels depends on a 1.5 A USB-C connection.

What you need What to check before buying Who it matters most to
Two microphones as a stereo pair Two microphone preamps that can be used simultaneously, suitable XLR connections and, if needed, phantom power for both microphones. If I want to record both violins as one ensemble with the amount of room sound I’m looking for, I’ll focus on a simple stereo setup. Around 36% of consumers put a shared stereo image first.
Separate editing and hall reverberation Two microphone channels that can be recorded separately and adjustable input levels; compare microphone positions on location using a test recording. If I want to edit the violins separately later, separate tracks and a suitable position in the hall matter more than extra inputs. Around 29% of consumers prioritise separate tracks and control over the room sound.
Power and monitoring on location Check the computer connection and power requirements, the phantom power you need, and whether there’s a headphone socket and direct monitoring. If I’m setting up the interface in a community hall, I want to be able to power the microphones and listen to the signals before recording. Around 21% of consumers focus above all on portability and monitoring.
Additional microphone tracks Count the microphone preamps, not the total number of inputs; check that phantom power is suitable for your planned setup. If I want to record additional microphones separately alongside the violins, I’ll need enough microphone channels. Around 14% of consumers put additional microphone tracks first.

Common misconceptions when buying

  • “Four inputs” means “four microphone inputs”

    The fourth-generation Focusrite Scarlett 4i4 has two microphone preamps and two additional line inputs. According to Tascam, the Tascam US-4x4HR has four microphone preamps.

    Check the exact model to see how many microphone preamps are available at the same time.

  • A larger interface will fix unwanted hall reverberation

    Microphone placement and room reflections affect your recording regardless of the interface. A microphone can’t simply remove the room’s reverberation from the signal.

    Compare short test recordings with different microphone positions before deciding whether you need extra channels.

  • A 48 V specification tells you everything about the power supply

    According to Audient, simultaneous phantom power for all four inputs on the Audient EVO 8 depends on the connection and the available current.

    Check your computer’s USB connection against the specific interface’s power requirements and the needs of your microphones.

Key brands at a glance

Focusrite

The fourth-generation Scarlett 2i2 is designed for two microphones; the Scarlett 4i4 adds two line inputs.

  • According to Focusrite, the 2i2 can send its two input signals to the left and right channels during stereo direct monitoring.
  • The extra line inputs on the 4i4 aren’t additional microphone preamps.

Tascam

The US-4x4HR is worth considering if you want to use additional microphones alongside the violins at the same time.

  • Tascam lists four microphone preamps, 48 V phantom power and two headphone sockets.
  • Tascam specifies an additional power source for use with an iPhone or iPad; this doesn’t apply universally to every computer setup.

Audient

The EVO 8 is an option if four microphone preamps and Smartgain are useful for your setup.

  • Audient lists four microphone preamps and Smartgain.
  • According to Audient, phantom power for all four channels requires a 1.5 A USB-C connection; with USB-A, phantom power is available on a maximum of two channels at once.

MOTU

The M2 is an option for two microphones if you want separate phantom power switches and a level meter.

  • MOTU lists two microphone combo inputs on the M2, each with its own 48 V switch, as well as direct monitoring.

Solid State Logic

The SSL 2 MKII is a good option for recording with two microphones and monitoring together through headphones.

  • Solid State Logic lists two microphone preamps and two headphone outputs.

Universal Audio

The Volt 276 is a two-microphone interface with optional processing during recording.

  • Universal Audio lists two preamps, 48 V phantom power, direct monitoring and a built-in compressor.
  • If you’d rather keep your recording unprocessed so you can make decisions later, check the optional processing carefully; advertised sound benefits are the manufacturer’s claims.

Audio interfaces at Joybuy

Recommended products coming soon.

Frequently asked questions

Are two inputs enough for a violin duet?

Yes, if you want to use exactly two microphones at the same time and both inputs have microphone preamps. To use two microphones for the players plus an additional stereo pair of room microphones, you’ll need four suitable microphone channels; extra line inputs aren’t a substitute.

How can I check the sound of the hall before recording properly?

Record short test passages with your planned microphone setup and listen for balance, reverberation and background noise. Changing the position can alter the balance between direct sound and room sound; a different interface won’t improve the room acoustics by itself.

Does every microphone need 48 V phantom power?

It depends on the microphone. If your microphones need phantom power, it must be available for every channel you’re using at the same time, under the actual connection and power conditions. Audient specifies different requirements for USB-C and USB-A on the EVO 8.

Can I simply record the other violinist’s performance?

Not just because you’re playing together in a community hall. Section 77 of the German Copyright Act (UrhG) gives performers the exclusive right to record their performance on a sound carrier. Make sure you have permission to record it and, if relevant, to use it later. If you publish the recording, additional rights in the work being performed may also apply.