Who are the different setups best suited to?

Duets with a shared sound

If you want to record both violins as an ensemble with a clear left-to-right stereo image, you can compare microphone distances and orientations in the hall. DPA Microphones explains that these factors help shape the stereo image.

Recording in a reverberant hall

If reflections or other room noise are distracting, test recordings at different distances and orientations can help you find the balance you want between the instruments and the room. Shure recommends experimenting with microphone position and distance.

Recording on the go

If you want to record without a separate pair of microphones, a recorder with built-in stereo microphones may be suitable, provided you can place it in a good position in the hall. Zoom and Tascam offer recorders of this kind with additional inputs for external microphones.

What should you consider when choosing?

External stereo pair

Suitable if: You want to record both violins together and position the microphones independently of the recording device.

Bear in mind: You’ll need suitable recording channels, cables and time to set up and compare positions. Greater distance can make the hall sound more prominent.

Two separately positioned microphones

Suitable if: You want to adjust each violin separately, or a test recording contains too much room sound.

Bear in mind: You’ll need two suitable inputs. When listening back, check the balance between the instruments and any spill between microphones.

Recorder with built-in stereo microphones

Suitable if: A compact setup without a separate pair of microphones is a priority, and you can position the recorder well in the hall.

Bear in mind: You can’t position the built-in microphones towards the violins independently of where the recorder is placed.

What you need What to check before buying Who is this important to?
Shared stereo image Two recording channels; test microphone position and polar pattern in the hall. If I want to capture the interplay between both violins spatially, I’ll want to listen back to recordings made from different positions. Around 36 % of consumers prioritise a shared stereo image.
Distracting room sound Compare distance and orientation in the hall; check whether the microphones can be positioned separately. If reflections or background noise are overpowering the recording, I’ll want to test the sound from different positions. Around 28 % of consumers prioritise the sound of the room.
Separate level control Allow for two suitable inputs and the ability to record separate tracks. If I want to adjust the volume of each violin separately later, I’ll need separate microphone channels. Around 18 % of consumers prioritise individual tracks.
Simple setup Check the built-in stereo microphones, placement options and accessories included with the specific offer. If I want to set up as few separate components as possible for a rehearsal or recording, a recorder with built-in microphones is worth considering. Around 18 % of consumers prioritise a simple portable setup.

What mistakes should you avoid?

  • Assuming a more expensive microphone can replace a test recording

    Position and room acoustics affect the sound of an acoustic recording. A different microphone won’t save you from having to compare suitable spots in the hall.

    Before drawing conclusions from the technical specifications, test your intended recording position with short passages and compare different distances.

  • Buying a condenser stereo pair without the right recording setup

    The RØDE M5 and LEWITT LCT 040 MATCH each require a suitable power supply. Also check that both microphones can be connected to suitable inputs.

    Check the connections and power supply for both channels, as well as what’s included with the specific offer.

    Depending on your existing equipment, you may need two suitable inputs, phantom power, cables and a suitable stand or mounting setup.

  • Assuming recorders with similar names are the same model

    Tascam lists the DR-40X in its product archive as discontinued. So don’t assume that the features described for the DR-40XP also apply to the DR-40X.

    Check the full model name in the listing against the relevant manufacturer documentation.

Which brands are worth considering?

RØDE

RØDE describes the M5 as a matched pair of directional small-diaphragm condenser microphones for acoustic instruments and stereo recording.

  • RØDE specifies a sensitivity difference of no more than 1 dB between the pair, and the microphones can be positioned separately.
  • According to the RØDE manual, each M5 requires P24 or P48 phantom power via XLR. The manufacturer’s specifications don’t prove that it will deliver a better result for a particular duet or hall.

LEWITT

According to LEWITT, the LCT 040 MATCH stereo pair comprises matched, separately positionable small-diaphragm microphones with a cardioid polar pattern.

  • Their design lets you position the two microphones separately in the room.
  • The LEWITT instructions specify 48 V for the connection. The manufacturer’s information about the pair alone can’t predict how reverberant your particular hall will sound.

Zoom

The Zoom H4essential combines built-in X/Y microphones with two additional XLR/TRS inputs, making it a compact starting point for a setup you can expand.

  • Zoom lists four tracks and 32-bit float recording among the device’s features.
  • You can’t position the built-in microphones independently of the recorder. No recording format can compensate for poor placement in the hall.

Tascam

The DR-40XP combines adjustable built-in stereo condenser microphones with XLR/TRS inputs and phantom power.

  • Tascam says the built-in microphones can be used in either X/Y or A/B configuration.
  • The DR-40X is a different model and is listed as discontinued in Tascam’s product archive. Be sure to check the full model name.

Sennheiser

The Sennheiser e 614 is a directional instrument microphone with a supercardioid polar pattern and an XLR connection.

  • Sennheiser specifies a supply voltage range of P12–P48.
  • A single e 614 doesn’t provide a two-channel setup for a duet; you’ll need additional suitable components for separate microphone channels.

Suitable products on Joybuy

Related products will be available soon.

Frequently asked questions

Can I record two violins using a recorder’s built-in stereo microphone pair?

Yes, if a shared stereo recording is all you need and you can position the recorder appropriately. If you want to adjust each violin separately on its own microphone track later, plan for two suitable external microphone channels.

What should I try before recording in a community hall?

Record short passages from several positions and listen back to see how the balance, room sound and background noise change. Shure recommends varying the distance and position to find the right mix of instrument and room sound.

Does an external stereo pair need a particular power supply?

It depends on the model: the RØDE M5 manual specifies P24 or P48, while the instructions for the LEWITT LCT 040 MATCH show 48 V. Check that both recording inputs can provide the power required by the specific pair.

What additional components might an external microphone pair need?

If you don’t already have a suitable recording setup, you may need a device with two suitable inputs and the required phantom power, as well as cables and a suitable way to position the microphones. What else you need depends on the equipment you already have and what’s included with the specific offer.

Can I record the duet and then publish it online?

Before recording, clarify the rights of everyone involved. Before publishing, make sure you have the necessary rights to use the work. Under § 77 UrhG, a performing artist has the exclusive right to record their own performance on a sound carrier. For making a protected cover recording available to the public for download, streaming or on your own website, GEMA specifies that a licence is required. What applies in an individual case depends, among other things, on who is involved, the work and the planned publication.