For separate tracks, each violin needs its own microphone, and the interface needs two microphone inputs that can be used at the same time. For a single recording using one microphone, one input may be enough. Models such as the 4th Generation Focusrite Scarlett 2i2 and the MOTU M2 offer two microphone inputs. However, microphone placement and the room affect the sound in the booth independently of the interface, as Shure explains.
Which setup is right for you?
A duo with separate tracks
If you want to record both violins at the same time, each with its own microphone, and edit them separately later, you’ll need two microphone inputs that can be used simultaneously. Focusrite and MOTU list models with two microphone inputs.
A duo focused on the sound of the booth
If you’re weighing up using one microphone for both players or using two, consider your setup and how much of the room you want to capture. Shure describes microphone choice and placement as important factors in an acoustic recording.
A duo sharing headphone monitoring
If you both want to monitor through headphones while recording, check not only the number of microphone inputs but also the number of headphone outputs and how they can be controlled. Solid State Logic lists two independently adjustable headphone outputs for the SSL 2+ MKII.
What should you look for when choosing?
One microphone for both
Suitable if: one combined recording is all you need and you don’t need to edit the violins on separate tracks.
Trade-off: The balance between the instruments depends more on their placement and how you play.
One microphone per violin
Suitable if: you want to record both instruments at the same time and adjust their levels separately later.
Trade-off: Two microphones can also pick up spill, so placement and distance still matter.
A stereo pair for the duet
Suitable if: a sense of space and the blend between the players matter more than having separate instrument tracks.
Trade-off: A stereo pair also captures the room. Shure recommends listening to the microphone arrangement and checking mono compatibility before recording.
When recording a violin duo in a small booth, decide what kind of recording you want before considering extra features.
| What you need |
What to check when buying |
Who is this important to? |
| Separate duet tracks |
Check for two XLR microphone inputs that can be used at the same time, and confirm how tracks are assigned in your recording software. |
If I want to edit both violins separately later, I need to be able to record two microphone signals at once. Around 36% of consumers put separate duet tracks first. |
| Booth sound and microphone placement |
Decide how many microphones to use and where to place them; two inputs won’t fix poor room acoustics. |
In a small booth, I want to hear how much room sound and spill the microphones pick up before settling on a setup. Around 29% of consumers prioritise booth sound and microphone placement. |
| Headphone monitoring |
Check the headphone outputs, direct monitoring and controls on the exact model. |
If we both want to monitor directly while recording, I need to consider the headphone connections separately from the recording inputs. Around 21% of consumers put shared headphone monitoring first. |
| Compatibility with your existing equipment |
Check microphone manuals for power requirements and make sure your computer connection and driver requirements are compatible. |
I want to check that my microphones, computer and monitoring needs will work with my setup before buying. Around 14% of consumers prioritise equipment compatibility and a straightforward setup. |
Common pitfalls
-
Counting every socket as an extra microphone input
On the 4th Generation Focusrite Scarlett 2i2, plugging into a front-panel jack disables the corresponding rear XLR microphone input.
Check the manual to see how many microphone channels can be used at the same time; don’t count the visible sockets.
-
Expecting the interface to fix poor booth sound
Microphone placement and the amount of room sound affect the recording independently of the interface. Shure highlights microphone placement and the room as separate factors.
First, try different microphone arrangements and distances. Then decide whether one shared microphone, individual microphones or a stereo pair best suits your aim.
-
Assuming two recording channels mean two headphone outputs
The MOTU M2 lists two microphone inputs and one headphone output. Solid State Logic says the SSL 2+ MKII has two independently adjustable headphone outputs; outputs aren’t additional recording channels.
Count inputs and headphone outputs separately, and check whether you need individual volume controls or different mixes.
-
Relying on a software trial as a permanent licence
PreSonus describes the Fender Studio Pro software included with the Studio 24c as a six-month trial.
Check the software’s trial period and terms of use separately from the hardware features.
Brands to consider
For recording with two microphones, the product ranges below mainly differ in level controls, headphone outputs and additional connections.
Focusrite
The 4th Generation Scarlett 2i2 offers two microphone inputs with Auto Gain and Clip Safe.
- Focusrite describes Auto Gain and Clip Safe as tools to help you set levels.
- Using a front-panel jack disables the corresponding rear XLR microphone input. The sockets therefore don’t count as extra channels that can be used at the same time.
MOTU
The M2 has two XLR/jack combo inputs, each with its own gain control and switchable 48 V phantom power.
- MOTU lists separate gain, phantom power and monitor switches for each input.
- It has one listed headphone output, which on its own isn’t enough to connect two headphones directly.
Audient
The EVO 4 is an interface with two microphone inputs, Smartgain and a monitor mix.
- Audient describes Smartgain as automatic level setting that can be used with both inputs.
- It has one listed headphone output, not two separate headphone outputs. Smartgain is a manufacturer feature, not proof of better duet recordings.
Solid State Logic
The SSL 2+ MKII combines two microphone preamps with two independently adjustable headphone outputs.
- The two headphone outputs are useful if two people want to monitor directly from the interface and adjust their volume separately.
- SSL describes the model as 2-in/4-out. Extra outputs aren’t additional microphone inputs; check separately whether you need different headphone mixes.
Steinberg
The UR22C offers two D-PRE microphone preamps, a monitor mix and MIDI connections.
- The MIDI connections are useful if you need MIDI as well as recording your duet.
- According to Steinberg’s manual, 32-bit integer support requires a driver and a DAW that can use this format.
Joybuy products for this topic
Joybuy product selection covering audio recording and microphones.
No image available
Yinkaer G10-P17-P17 podcast kit with two microphones
According to the product name, this set is designed for livestreaming on a computer or phone, singing and gaming. Whether it suits a violin recording depends on whether its connections and separate-track recording meet the needs of your setup.
The product name lists a sound card or audio mixer, two 3.5 mm condenser microphones, effects and disc stands.
View at Joybuy
Frequently asked questions
Do I always need two microphone inputs for two violins?
No. One suitable input is enough for a single recording using one microphone. If you want to record each violin at the same time with its own microphone on a separate track, you’ll need two microphone preamps that can be used simultaneously. A stereo pair also requires two microphone channels.
When should I switch on 48 V phantom power?
Only switch it on if the microphone’s instructions say it needs it. Shure recommends checking the manual for the specific model or contacting the manufacturer, particularly for ribbon microphones, and switching phantom power off when connecting or disconnecting a microphone.
How can I check the sound in a small booth before recording?
Record a short passage using your planned microphone arrangement and listen for room sound and spill. Adjust the position or distance if needed; Shure describes microphone placement and the room as separate factors that affect the recording.
What rights apply when buying from a business seller?
When you buy from a business seller in the EU, faulty goods are generally covered by a minimum two-year legal guarantee; this is separate from any voluntary warranty. According to the Verbraucherzentrale, online consumer purchases generally come with a 14-day right to cancel, subject to the applicable conditions and exceptions.