Who are studio monitors suitable for?

Editing voice-overs from a fixed listening position

If you listen to different intro versions repeatedly, keeping your speakers and listening position consistent helps you avoid confusing differences between versions with changes caused by the room. Genelec highlights speaker placement as an important part of stereo monitoring, while iZotope recommends carefully checking edited versions for unwanted artefacts.

Editing voice-overs at a small desk

You need room for both speakers beside your screen and work materials, while still being able to angle them properly towards your listening position. So your setup needs to work with the space available and where you actually sit.

Editing without a dedicated audio interface

If you want to connect your computer directly or switch between speakers and headphones, check the connections on the specific system. ADAM Audio describes USB-C connectivity on the D3V, while PreSonus lists several analogue inputs and a front-mounted headphone output for the Eris 3.5 2nd Gen.

What should you look for when buying?

First, compare your listening position with the space available. Then check the connections and, finally, whether the listing includes one speaker or a complete pair.

Buying priority What to check Who this matters most to
Consistent voice-over assessment Check whether both speakers can be positioned symmetrically around your listening position, and whether you can keep your position and settings consistent. Genelec recommends an angle of around 60° between two monitors at the listening position. When I compare several intro versions, I want to hear the differences without constantly changing where I sit. Around 40% of consumers put consistent voice-over assessment first.
Space and positioning Measure the space available for both speakers, taking into account their depth, the cables and a position that is as symmetrical as possible around your seat. At a small desk, I still need room to work alongside the speakers. Around 30% of consumers prioritise space and positioning.
Signal path and controls Match your computer or interface outputs to the inputs on the exact model, and check which cables and headphone connection you need. If I want to work without a separate interface or easily use headphones while editing, the right connections matter to me. Around 20% of consumers prioritise connections and controls.
Complete stereo setup Check how many speakers are included in the specific listing and whether it comes with the cables needed for your signal path. I want to know what else I need for a working stereo system before I buy. Around 10% of consumers focus first on getting a complete setup.

Common buying mistakes

  • Assuming a single speaker is a stereo pair

    Yamaha describes the HS5 and KRK the ROKIT 5 Generation Five as individual monitors, while PreSonus lists the Eris 3.5 2nd Gen as a pair. If you compare listings without checking how many speakers are included, you may not allow for the number you need for stereo.

    Before buying, check how many speakers are included and what comes with the specific listing.

  • Comparing the lowest frequency figure at face value

    Yamaha gives the HS5 frequency limits at reference levels of −10 dB and −3 dB, while ADAM Audio gives a figure for the T5V at −6 dB. These figures cannot be directly compared as a simple ranking, and the room and speaker placement also affect what you hear.

    Compare frequency figures only alongside their respective reference levels, and plan your setup around your actual listening position.

  • Assuming the product category tells you which connections you need

    Connections vary by model: ADAM Audio lists USB-C and TRS for the D3V, Yamaha specifies XLR/TRS for the HS5, and PreSonus lists several analogue inputs for the Eris 3.5 2nd Gen.

    Make a note of your computer or interface outputs and check they match the inputs on the exact model and the cables included.

Key brands at a glance

ADAM Audio

The D3V and T5V ranges suit different setups: ADAM Audio describes the D3V as an active desktop pair and the T5V as an individual nearfield monitor.

  • For the D3V, ADAM Audio lists USB-C playback and balanced TRS inputs. It could suit you if these connections are compatible with your computer or interface.
  • For connecting a subwoofer to the D3V, ADAM Audio describes using an external audio interface and an analogue signal path. When planning where to place the T5V, bear in mind its rear bass-reflex port.

Yamaha

The HS5 is an active nearfield monitor sold individually, with XLR/TRS inputs, according to Yamaha’s European product information.

  • Yamaha lists ROOM CONTROL and HIGH TRIM controls for the HS5. Check whether these adjustment options suit your setup.
  • Remember to account for the number of speakers you need for a stereo setup. The HS5 frequency response figures use different reference levels, including −10 dB and −3 dB, so they cannot be directly compared with figures given in a different way.

PreSonus

PreSonus describes the Eris 3.5 2nd Gen as a compact analogue desktop pair.

  • The manufacturer lists TRS, RCA and stereo mini-jack inputs, a front-mounted headphone output and included cables. This can make choosing easier if these analogue connections suit your equipment.
  • The inputs listed are analogue. Before buying, check that they suit your existing signal path.

KRK

According to KRK, the ROKIT 5 Generation Five is an individual active studio monitor with selectable listening modes.

  • KRK lists Mix, Focus and Create modes, as well as room-tuning options. Check whether these features would be useful for your workflow.
  • You need two units for stereo. Don’t assume that a particular mode will help you assess spoken intros in your room just from its name.

Matching products at Joybuy

Related products coming soon.

Frequently asked questions

How should I position two monitors to compare my intros?

Angle both monitors towards your listening position and place them at the same height, as symmetrically as possible. Genelec recommends an angle of around 60° between the monitors at the listening position, though furniture and room surfaces can still affect what you hear.

Do I have to use an audio interface to connect them?

Not with every signal path: ADAM Audio describes computer playback via USB-C for the D3V. With models connected via analogue, your equipment’s outputs, the monitor inputs and the cables all need to be compatible. If you also want to connect a subwoofer to the D3V, ADAM Audio describes using an external audio interface.

What should I check before buying a stereo pair?

Check whether the listing includes one speaker or a pair, and which cables are included. Yamaha describes the HS5 as individually packaged, while PreSonus lists the Eris 3.5 2nd Gen as a pair. Make sure the contents match the connections on your equipment.

What should I know about statutory rights and warranties?

For a consumer purchase from a trader in the EU, the minimum statutory guarantee is two years from receipt; the Your Europe consumer portal explains this period. Any additional manufacturer’s warranty is separate, and this consumer information does not necessarily apply to business purchases.

What should I know about electrical monitors and old equipment in Germany?

When monitoring the market for affected electrical products, the German Federal Network Agency checks for things including CE marking, identifiable manufacturer details and German-language instructions with the required information. The German Environment Agency explains that waste electrical equipment should be collected separately from household rubbish, for example at recycling centres and suitable return points.