For family videos across multiple floors, a wireless repeater may be suitable if it can still get a usable connection to the router at the planned location; Telekom and FRITZ! recommend checking both placement and connection quality. If you have an available LAN cable, look for a model that explicitly supports access point or LAN bridge mode. If there are several separate Wi-Fi dead zones, you may need multiple compatible mesh nodes.
Which solution is right for you?
Families with a Wi-Fi dead zone on one floor
If videos keep buffering or are difficult to access in that area, first check for a position where the repeater can still receive a usable signal from the router. Telekom and FRITZ! offer guidance on placement and checking connection quality.
Homes with LAN between floors
If you can run a network cable to the other floor, look specifically for a model that explicitly supports access point or LAN bridge mode. TP-Link and devolo product information describes these operating modes for certain models.
Families with several areas of poor reception
If you need to cover several separate areas, you may need multiple nodes. Make sure the router and devices support the mesh system you want to use; devolo describes mesh compatibility with certain other devolo Wi-Fi products.
What to look for when buying
A single wireless repeater
A good fit if: There is still a usable Wi-Fi connection to the router at the planned location and you mainly need to cover one distant area.
Consider: A repeater advertised as powerful will not automatically fix a weak signal passing through the floor.
An access point over LAN
A good fit if: You have, or can run, a network cable to the other floor and the model supports the operating mode you need.
Consider: You will need a suitable cable connection; an Ethernet port alone does not mean the device has access point mode.
Multiple mesh nodes
A good fit if: You need to cover several floors or rooms that are far apart, and a single access point is not enough.
Consider: You will need to plan the locations and connections for several devices; mesh features depend on having compatible equipment.
Powerline with Wi-Fi
A good fit if: Neither a suitable Wi-Fi connection nor a LAN cable is available, and you can check the electrical wiring where you plan to use it.
Consider: Transfer speeds can depend on the socket used and are not guaranteed for every electrical circuit.
| Priority |
What to look for when buying |
Who is this especially important to? |
| Wi-Fi connection between floors |
Check the planned location and connection indicator, then test reception where you will watch videos. |
If I want to cover a distant area, the repeater needs to receive a usable signal from the router in the chosen spot. Around 36% of consumers rank this Wi-Fi connection as their top priority. |
| Reliable video streaming |
Check the connection between both devices involved, rather than relying solely on the advertised maximum data rate. |
If I want to watch or share family videos, what matters to me is having a usable connection between the devices. Around 29% of consumers prioritise video streaming. |
| LAN connection to the other floor |
Check whether a network cable is available and confirm that the specific model explicitly supports the operating mode you need. |
If there is a network cable running to the other floor, I want to be able to use it for the connection. Around 21% of consumers put a LAN connection first. |
| Several areas needing coverage |
Check that the router and nodes are compatible with the same mesh system, and plan where to place each node. |
If several rooms far apart need reception, I need to consider whether all the nodes are compatible. Around 14% of consumers prioritise coverage in several areas. |
Common buying mistakes
-
Putting the repeater right in the Wi-Fi dead zone
The repeater needs a usable connection to the router itself. So a position right at the edge of the reception area may not be suitable.
Check for sockets closer to the router. Once set up, check the connection indicator and reception where you will watch videos.
-
Assuming the advertised Mbit/s is the speed you will get between floors
Manufacturers’ figures for Wi-Fi data rates do not show what connection you will actually get through walls or floors at a particular location.
Test the Wi-Fi connection and reception where you will watch videos. If you have LAN, also check whether the device explicitly supports access point mode.
-
Confusing router compatibility with mesh compatibility
A repeater can extend a Wi-Fi network without sharing its advertised mesh features with every router. TP-Link requires an EasyMesh-compatible router for EasyMesh on the RE705X; devolo describes its mesh as working with other devolo Wi-Fi products.
Check the specific router and repeater against the mesh system they are said to support before choosing multiple devices.
-
Assuming Powerline will work as a guaranteed replacement cable
According to devolo, transfer speeds may be low at some sockets.
Test the connection at the sockets you plan to use, rather than relying on the product’s rated speed alone.
Relevant brands at a glance
FRITZ!
According to the manufacturer, the FRITZ!Repeater 1200 AX and 3000 AX have different port configurations; the 3000 AX is a tri-band model.
- The 1200 AX has one Gigabit LAN port, while the 3000 AX has two. This may be useful when planning for wired devices.
- Check FRITZ!Mesh compatibility with a suitable FRITZ!Box. The quoted Wi-Fi rates do not guarantee performance through a particular floor.
TP-Link
The manufacturer describes the RE705X as a Wi-Fi 6 repeater with a Gigabit port and access point mode.
- According to the German product page, the RE705X can also be used with other Wi-Fi routers and supports access point mode.
- EasyMesh requires an EasyMesh-compatible router. The manufacturer’s specifications do not predict the connection you will get at your particular location.
devolo
According to the manufacturer, the WiFi 6 Repeater 5400 can be used as a wireless repeater or an access point; a mesh bundle includes two devices.
- devolo describes mesh use with other devolo Wi-Fi products and lists access point mode for the repeater.
- Compatibility and performance figures are provided by the manufacturer. With Powerline, transfer speeds may be low at some sockets.
Telekom
Speed Home WLAN is a Wi-Fi 6 mesh extender that you can check for compatibility with an existing Speedport home network.
- Telekom provides instructions for different generations of Speed Home devices.
- Check the exact device generation against your router. Telekom lists additional requirements for setting up the second generation with a Speedport 7 or newer.
Joybuy product selection
This selection includes wireless repeaters, mesh kits and models with a listed access point mode. The right option depends, among other things, on your existing cabling and the areas that need coverage.
No image available
TP-Link RE190 AC750 Wireless Repeater, 433 Mbps, White
For a distant area, provided the router signal is still available at the chosen location.
Dual-band, with 2.4 and 5 GHz bands; signal strength indicator to help you check the location.
View at Joybuy
No image available
TP-Link Deco M4 Mesh WiFi System AC1200, 3-pack
For several rooms, if you want to use a mesh system with three units.
AC1200 dual-band; three units; Gigabit ports and router and access point modes, according to the product description.
View at Joybuy
No image available
MERCUSYS ME80X Wi-Fi 6 Range Extender AX3000
If a network cable is available where you plan to use it, the explicitly listed access point mode may be suitable.
Dual-band; 574 Mbps at 2.4 GHz and 2402 Mbps at 5 GHz; Gigabit port and signal strength indicator. Access point mode requires an Ethernet connection to the router.
View at Joybuy
No image available
TP-Link RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender
For extending an existing Wi-Fi network; EasyMesh is only available with compatible EasyMesh devices.
2.5G Multi-Gigabit port; MLO and Smart Roaming are mentioned in the product title.
View at Joybuy
No image available
MERCUSYS Halo H25BE Mesh Wi-Fi Kit, 2-pack, Wi-Fi 7 BE3600
For several areas needing coverage with two mesh units; according to the product description, one unit is set up as the main router and connected to the modem.
Three Gigabit ports per unit; router and repeater functions are listed for the kit.
View at Joybuy
Frequently asked questions
Where should I place a wireless repeater for another floor?
Place it somewhere it can still connect well to the router, rather than right at the edge of the Wi-Fi dead zone. If the connection is weak, Telekom recommends moving Speed Home WLAN closer to the router or another extender; then check reception where you will watch videos.
Can a repeater with a LAN port also work as an access point?
It depends on the specific model. TP-Link explicitly lists access point mode via the Gigabit port for the RE705X; devolo describes this mode for the WiFi 6 Repeater 5400.
Will mesh work automatically with my existing router?
No. Mesh features require compatible devices. EasyMesh on the TP-Link RE705X requires an EasyMesh-compatible router; devolo describes its mesh as working with other devolo Wi-Fi products. Check your specific router model before buying.
Do I need an individual radio licence to use a standard Wi-Fi repeater at home in Germany?
According to the German Federal Network Agency’s Wi-Fi information leaflet, Wi-Fi applications using frequencies generally allocated by the agency do not require an individual application or formal authorisation. This does not apply universally to any frequency or modifications to the radio device.