Which solution is right for you?

For viewers with a Wi-Fi dead zone between floors

If the screen is on a different floor from the router, you’ll need to place the repeater somewhere it can still reach both. FRITZ! and Telekom recommend finding a spot with a good enough connection to the router.

For homes with an Ethernet connection on the target floor

A usable network cable can replace the wireless connection back to the router through the ceiling. FRITZ! and TP-Link describe wired operating modes for this purpose; check which LAN or access point mode is available on the model you’re considering.

For homes with several coverage areas

If you want to cover other floors as well as the room where you’ll watch the concert, the connection between nodes and compatibility with your router are important factors. FRITZ!, TP-Link and devolo describe mesh features for compatible devices and systems.

What to look for when buying

A Wi-Fi repeater

A good fit if: a possible socket location can reach both the router and the area where you’ll watch the concert.

Bear in mind: A strong signal to the screen won’t help if the repeater itself has a poor connection to the router. FRITZ! and Telekom recommend checking the location and connection.

Several mesh nodes

A good fit if: you want to cover several floors or areas, and each node can get a good enough connection.

Bear in mind: You’ll need additional devices and suitable locations. Mesh features require a compatible system.

Ethernet bridge or access point

A good fit if: you have a usable network connection to a suitable location, particularly if the wireless signal through the ceilings is weak.

Bear in mind: You’ll need a suitable operating mode and should consider the cable route and connection to the router.

Powerline with Wi-Fi

A good fit if: there’s no suitable location for a wireless device or practical route for an Ethernet cable, and you can test the sockets you plan to use.

Bear in mind: According to devolo, electrical interference and socket location can affect the connection.

Buying priority What to check Who it matters most to
Coverage across floors Check possible intermediate locations, and the connection to both the router and the screen. If I want to watch the concert on another floor, I need a location where both wireless connections work. Around 36% of consumers prioritise reliable coverage across floors.
Ethernet connection where you’ll watch the concert Check whether there’s an existing network cable and whether the device has an Ethernet bridge or access point mode. If the wireless signal through the ceiling is weak, I’d rather use an existing cable than bridge the connection back to the router wirelessly. Around 29% of consumers prioritise a wired connection.
Several coverage areas Check compatibility with your router and find a suitable location for each node. If I want to cover other floors as well as the room where I’ll watch the concert, I’ll make sure the router and nodes are compatible with the mesh system I choose. Around 21% of consumers prioritise coverage in several areas.
Fewer additional devices Work out which locations and connections you’ll need; weigh up a single device against the extra cabling or nodes required. If I want to use as little extra hardware as possible, I’ll first check whether one device in a suitable location will do the job. Around 14% of consumers put this first.

Common buying mistakes

  • Putting the repeater directly in the Wi-Fi dead zone

    A repeater connected wirelessly needs a good enough connection to the router itself. If the signal is already weak where you place it, it may not solve the coverage problem reliably.

    Check possible intermediate locations and the connection to both the router and the screen where you’ll watch the concert. If there’s no suitable spot for a wireless device, consider an Ethernet connection or another solution for covering the floors.

  • Assuming router compatibility means mesh compatibility

    A device may extend a router’s Wi-Fi without supporting its mesh features. TP-Link says that the EasyMesh features described require an EasyMesh-compatible router.

    Before buying, check your exact router model against the mesh system supported by the manufacturer.

  • Assuming Powerline works equally well in every socket

    devolo points out that some sockets may deliver low transfer rates, and electrical interference can affect the connection.

    Test the sockets you plan to use under the same conditions in which you’ll be watching the live concert.

Brands to consider

FRITZ!

According to the manufacturer, the FRITZ!Repeater 1200 AX combines Wi-Fi 6 with a Gigabit LAN port, making it particularly relevant for homes with a FRITZ!Box.

  • FRITZ! says it can be connected wirelessly or via LAN.
  • The advertised Wi-Fi speed doesn’t tell you how well the signal will travel through the ceilings in your home. Check separately whether mesh features will work with a third-party router.

TP-Link

According to the manufacturer, the RE705X has repeater and access point modes, as well as a Gigabit Ethernet port.

  • TP-Link describes EasyMesh as working with an EasyMesh-compatible router.
  • You’ll need to check whether the mesh features work with your existing router and how well the connection performs between floors in your specific setup.

devolo

According to the manufacturer, the WiFi 6 Repeater 5400 has an access point mode and two Gigabit LAN ports. Separate Powerline products use a different type of connection.

  • If you have existing cabling in your home, access point mode can be an alternative to a wireless connection back to the router.
  • devolo points out that electrical interference and the location of individual sockets can affect the Powerline connection.

Telekom

Speed Home WLAN is designed to extend a compatible home network. Telekom describes how to set up mesh and includes an indicator for a weak connection.

  • Telekom’s instructions explain how to set up mesh with compatible routers and devices.
  • With a router that doesn’t support the right mesh features, the device can work as a repeater without mesh using the setup method described.

Suitable products on Joybuy

The selection below includes wired access points, Wi-Fi repeaters and mesh devices for coverage across several floors. Before buying, check which operating mode is right for your router, available connections and planned location.

Ubiquiti U7 Mesh

Ubiquiti U7 Mesh

An option as a wired access point if you have a network connection where you plan to put it.

Features a 2.5-GbE Ethernet uplink. For the described setup, you’ll need an Ethernet uplink, PoE+ and the UniFi Network application.

View on Joybuy
TP-Link RE190 AC750 Wireless Repeater

TP-Link RE190 AC750

A wireless repeater for extending your Wi-Fi, provided you place it somewhere with a good enough connection to the router.

The product specifications list 300 Mbit/s at 2.4 GHz and 433 Mbit/s at 5 GHz, along with a signal strength indicator.

View on Joybuy
MERCUSYS ME80X Wi-Fi 6 AX3000 Range Extender

MERCUSYS ME80X Wi-Fi 6 AX3000

Repeater mode is an option if the location allows it to connect to your router; access point mode requires an Ethernet connection to the router.

The product specifications list dual-band Wi-Fi 6, 574 Mbit/s at 2.4 GHz, 2402 Mbit/s at 5 GHz, a Gigabit port and a signal strength indicator.

View on Joybuy
TP-Link RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

TP-Link RE235BE BE3600 Wi-Fi 7

A wireless repeater for a location within range of your existing router’s Wi-Fi; EasyMesh features require a compatible device at the other end.

The product specifications list dual-band Wi-Fi 7, MLO, Smart Roaming and a 2.5-GbE port.

View on Joybuy
MERCUSYS Halo H25BE mesh Wi-Fi system with two units

MERCUSYS Halo H25BE Mesh Wi-Fi System (2-pack)

An option for covering several areas: the setup described connects one unit to the modem and places the second within its range.

The product specifications list Wi-Fi 7 BE3600 and three Gigabit ports per unit.

View on Joybuy

Frequently asked questions

Where should I put the repeater for the concert?

If it connects wirelessly, put it somewhere that still gives it a stable connection to the router while also reaching the screen. Check both connections before the live stream; Telekom says Speed Home WLAN has an indicator for a weak connection.

Will mesh work automatically with any router I already have?

No. Specific mesh features require a compatible router and device system. TP-Link says EasyMesh on the RE705X requires an EasyMesh-compatible router, so check your exact router model and the system it supports.

Do I need to maintain a repeater?

Check the connection status and available device updates from time to time. An update alone won’t fix a poor connection caused by the location: if needed, move the repeater closer to the router or, if you have a network cable, use a suitable LAN mode.

What extra devices or connections might I need?

Depending on your home, you might need extra mesh nodes, an Ethernet cable or a Powerline solution. What you need depends on the wireless locations, cable routes and sockets that are actually available.

What should I look for in a Wi-Fi repeater in Germany?

The German Federal Network Agency lists the CE mark and the required accompanying documents among the relevant things to check for radio equipment. According to its guidance, retailers must check that the CE mark and the documents required to place the product on the market are present. The CE mark doesn’t guarantee streaming performance in your home.