Who are these solutions for?

Readers with weak Wi-Fi on the floor they use

If you download magazines on a tablet or mobile phone away from the router, a repeater may help, provided you can place it somewhere that still gets a usable signal.

Homes where the floor is difficult to penetrate

If the wireless signal is too weak to reach another floor, you could run a network cable to an access point. Alternatively, you can test a connection over your home’s electrical wiring using the sockets you plan to use.

Homes with several Wi-Fi dead spots

If your reading devices need Wi-Fi in several places, plan the number and location of access points alongside their compatibility with your router or mesh system.

What should you look for when buying?

First, check whether there is an intermediate location with a usable signal from the router. If there isn’t a suitable spot, consider an Ethernet connection and, if needed, test powerline in your own home. For wireless devices, the Bundesnetzagentur lists CE marking, device identification, instructions and warnings in German, and a declaration of conformity among the relevant checks.

The percentages below refer to the main concern of consumers who want to download digital magazines across multiple floors.

Consideration What to check when buying Who is this especially important to?
Reception at the intermediate location Check for suitable sockets between the router and the floor you want to reach; once set up, check the connection indicator and test a download where you read. If I read on the floor I’m trying to reach, I need a location where the repeater itself can still receive a usable signal. Around 33% of consumers put reception at the intermediate location first.
Connection between floors Check whether you have existing Ethernet cabling and a suitable access point mode; otherwise, test powerline using the sockets you plan to use. If you need to overcome a weak wireless signal through the floor, the connection between floors is your main concern. Around 27% of consumers put this first.
Router and mesh compatibility Check your router model, firmware and the specific mesh combination that is explicitly supported. If I want to keep using my router’s existing features, compatibility with the specific model is essential. Around 20% of consumers prioritise integration with their existing system.
Setup and number of devices Identify how many reading locations need coverage; compare the number of access points required, operating mode and firmware maintenance. If you only need to cover one reading spot further away, you’ll want to keep extra setup to a minimum. Around 20% of consumers focus primarily on keeping things straightforward.

Common buying mistakes

  • Placing the Wi-Fi repeater where the router’s signal has already dropped out

    A Wi-Fi repeater can only extend the connection it receives where it is placed.

    First, choose a socket between the router and your reading spot where the signal is still usable, then test a download on your tablet.

  • Assuming router compatibility means full mesh compatibility

    A repeater can extend your Wi-Fi range without supporting all the mesh features of your existing router. According to TP-Link, the EasyMesh feature on the TP-Link RE700X requires a compatible router.

    Check exactly which mesh mode is supported with your router model.

  • Assuming powerline will perform similarly at every socket

    devolo notes that some sockets may deliver low data rates. With VDSL, you should also take possible interactions with powerline into account.

    Test the connection at the sockets you plan to use and, if you have a VDSL connection, look out for possible interference.

Key brands at a glance

FRITZ!

FRITZ! offers repeaters to extend an existing Wi-Fi network. The documented LAN bridge on the FRITZ!Repeater 1200 AX may be useful for a network with a FRITZ!Box.

  • FRITZ! specifies a Gigabit LAN port for the 1200 AX, and three wireless units and LAN ports for the 6000.
  • The documented mesh integration for the 1200 AX LAN bridge requires a FRITZ!Box running FRITZ!OS 7 or later. Advertised maximum Wi-Fi speeds do not demonstrate download performance across multiple floors.

TP-Link

The RE700X can be used as a Wi-Fi repeater or access point; Deco units are an option for a network with multiple nodes.

  • TP-Link describes Ethernet backhaul for connecting Deco units over a network cable.
  • The RE700X EasyMesh feature requires a compatible router. For Ethernet backhaul, the cabling and operating mode must be set up correctly.

Telekom

Speed Home WLAN may suit a compatible Speedport system or a router that has been checked for compatibility, particularly if you need Wi-Fi coverage in several locations.

  • Telekom describes WPS setup, connection indicators and firmware maintenance.
  • Setup differs depending on whether the router supports mesh. Speed Home WLAN and Speed Home WLAN (2nd Gen.) are different versions, so check which one you need before buying.

devolo

The range includes Wi-Fi repeaters such as the WiFi 6 Repeater 5400, as well as Magic powerline kits with Wi-Fi for floors that are difficult to reach wirelessly.

  • This means you can choose between wireless repeaters and solutions that connect over your home’s electrical wiring.
  • With powerline, some sockets may deliver low data rates. With VDSL, be aware of possible interference in your particular setup.

Joybuy products for multiple floors

The Joybuy products below include Wi-Fi repeaters, wired access points and mesh systems for multiple rooms or floors. Before buying, check that the operating mode and connections suit your router and setup.

Ubiquiti UniFi U6+ WiFi 6 Access Point, Dual-Band, Gigabit PoE, White

Ubiquiti UniFi U6+ WiFi 6 Access Point

A wired access point solution for a location with Ethernet and PoE available.

WiFi 6, Dual-Band, Gigabit PoE, White. Installation requires an Ethernet connection and PoE; configuration is managed through the UniFi Network application.

View at Joybuy
TP-Link Deco M4 Mesh WiFi System AC1200, 3-pack

TP-Link Deco M4 Mesh WiFi System AC1200 (3-Pack)

A mesh system with three units for consumers who want coverage across multiple rooms or floors.

Dual-Band, Gigabit ports. The setup described connects one unit to the modem and configures the remaining units through the Deco app.

View at Joybuy
MERCUSYS ME80X Wi-Fi 6 Range Extender AX3000, Dual-Band

MERCUSYS ME80X Wi-Fi 6 Range Extender AX3000

An option if you can place the repeater somewhere with a signal from your router, or connect it by Ethernet as an access point.

Dual-Band, Gigabit port, AP mode. For use as a Wi-Fi repeater, the router’s signal must reach its location; access point mode requires an Ethernet connection to the router.

View at Joybuy
TP-LINK RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

TP-LINK RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

A Wi-Fi repeater for an intermediate location where it can still connect to your existing router.

Dual-Band, 2.5G Multi-Gigabit port, MLO, Smart Roaming and EasyMesh compatible. To use it as a Wi-Fi repeater, the router’s signal must reach its location; EasyMesh features require compatible devices.

View at Joybuy
MERCUSYS Halo H25BE Mesh Wi-Fi Set, 2-pack

MERCUSYS Halo H25BE Mesh Wi-Fi Set (2-Pack)

A mesh set for consumers who want access points covering several areas.

Wi-Fi 7 BE3600, Dual-Band, 3 × Gigabit ports per unit. In the setup described, one unit acts as the main router; the second is placed within its range.

View at Joybuy

Frequently asked questions

Can I plug the repeater in right next to my tablet on the floor with poor coverage?

Only if the repeater itself can still get a usable connection to the router there. If it shows a weak connection, place it closer to the router and then test a download on your tablet.

Can a repeater use an existing network cable on another floor?

Yes, provided the specific model supports the right operating mode. FRITZ! documents a LAN bridge for the 1200 AX, while TP-Link documents an access point mode for the RE700X. Check separately whether its mesh features will work with your router.

What ongoing maintenance or extra devices might I need?

Keep the firmware up to date in line with the manufacturer’s instructions. You may need additional access points to cover several separate dead spots; powerline requires adapters to connect over your home’s electrical wiring.

What should I look for in a Wi-Fi device sold in Germany?

For wireless devices, the Bundesnetzagentur lists correct CE marking, device identification, instructions and warnings in German, and a declaration of conformity among its checks. Check these points for the specific version of the device; a product listing alone does not confirm them.