What should you look for when buying?
Start by measuring your internet upload speed, then check the connection at your intended workstation. Next, decide whether Ethernet, wireless mesh or a suitable router upgrade is right for your set-up.
| Consideration |
What to check before buying |
Who is it most relevant to? |
| Coverage between floors |
Check where you could position the nodes and whether the system supports Ethernet backhaul or the wireless connection you need. |
If I work across multiple floors, I need a reliable signal at each workstation and on the backhaul connection. That’s why around 36% of consumers put coverage between floors first. |
| Actual upload speed |
Compare your connection’s measured upload speed with the connection at your intended workstation. |
When working with large files, I want to know whether my internet connection or Wi-Fi is slowing down transfers before choosing new hardware. Around 29% of consumers prioritise this exact upload bottleneck. |
| Connection compatibility |
Check whether you use DSL, cable or fibre, and find out which operating modes and mesh compatibility the specific device offers. |
If I want to keep or replace my router, I first check my connection type and the operating mode of the additional system. Around 21% of consumers prioritise connection compatibility. |
| Number of devices and features |
Plan where you’ll need nodes and check which features are available in your intended operating mode. |
I want to know in advance how many nodes and which features my set-up will actually need. Around 14% of consumers prioritise the number of devices and the features they need. |
Joybuy products for extending your mesh network
The products below extend your mesh network with additional Wi-Fi access points. Before choosing one, check that the backhaul connection between floors works where you plan to position the devices.
No image available
TP-Link Deco BE22 (2-pack), Wi-Fi 7 mesh system, dual-band, Gigabit Ethernet
This two-unit set is worth considering if you’re planning to add Wi-Fi access points and use the system in router or access point mode.
Features listed in the product name: Wi-Fi 7, dual-band and Gigabit Ethernet.
View on Joybuy
No image available
TP-Link Deco M4 AC1200 (3-pack), dual-band mesh system
This three-unit set is an option if you want to distribute several additional Wi-Fi access points and use the system in router or access point mode.
Features listed in the product name: AC1200, dual-band and Gigabit ports.
View on Joybuy
No image available
MERCUSYS Halo H25BE (2-pack), Wi-Fi 7 BE3600, dual-band
This two-unit set is one way to add mesh access points. Check the position of the second node in relation to the first.
Features listed in the product name: three Gigabit ports per unit, MU-MIMO, WPA3 and parental controls. According to the product description, the second node must be within range of the first.
View on Joybuy
No image available
TP-Link Deco S4 AC1200 (3-pack), dual-band mesh system
This three-unit set is worth considering if you’re planning to add mesh access points and want to keep using an existing modem or router. Check that it’s compatible with your set-up.
Features listed in the product name: AC1200, dual-band and Gigabit ports.
View on Joybuy
No image available
Ubiquiti UniFi U6 Mesh, Wi-Fi 6 access point
This access point may be an option if you’re planning an additional device for a compatible UniFi network; it isn’t a standalone internet router.
Features listed in the product name: indoor/outdoor design and a PoE adapter included. According to the product description, mesh functionality requires a compatible UniFi network.
View on Joybuy
Frequently asked questions
Will a faster Wi-Fi router automatically speed up draft uploads?
No. Measure your internet connection’s upload speed and also check the connection at your workstation. The German Federal Network Agency explains how to measure the internet speed you actually achieve. A Wi-Fi maximum speed isn’t the same as the transfer rate to an external service.
Can a mesh system work behind my existing router?
This is possible with the Deco system described by TP-Link when it’s in access point mode. According to TP-Link, Ethernet backhaul also works in this mode, although some advanced Deco features aren’t available. Check the instructions for the specific system you’re considering.
How do I connect Deco nodes on different floors via Ethernet?
TP-Link describes Ethernet backhaul between Deco units. According to the instructions, in router mode, satellite units must connect behind the main Deco or a switch connected to it. In access point mode, they can also connect to your existing main router. Plan your cabling to suit the operating mode.
Can I use my own router in Germany?
The German Federal Network Agency confirms that you can choose your own end device at the network termination point, including on passive optical fibre networks, and refers to the same principle for VDSL and cable. This doesn’t mean every device is technically compatible with every connection, so check your connection type and device compatibility.
What should I look out for when buying a Wi-Fi device for the German market?
Check that the specific wireless device carries the CE marking and comes with the required accompanying documents, including user and safety instructions in German. The German Federal Network Agency lists these points in its guidance on checks by retailers.