Which solution is right for you?

Readers with Wi-Fi dead spots

You want to download magazines on several floors and improve your Wi-Fi connection first at the places where you actually read.

Homes with a working router

Your internet connection is already working, and you’re looking for a suitable extension rather than replacing your router in a hurry.

Homes with Ethernet on several floors

You can connect an additional Wi-Fi access point using an Ethernet cable and want to avoid relying on a wireless link between floors.

What should you look for when buying?

Single router

Best if: you already have a usable connection where you read and the router is compatible with your internet connection.

Bear in mind: Wi-Fi standards and advertised data rates don’t guarantee that the signal will reach through the floors of your home.

Wireless mesh system

Best if: you want to keep your existing router and there’s a usable wireless connection where you plan to place the additional node.

Bear in mind: an extra node can’t fix a weak signal coming in; check that it’s compatible with your router, too.

Access point or mesh over Ethernet

Best if: an Ethernet cable reaches the floor with poor coverage, or one can be installed there. This is particularly useful when the wireless connection between floors is weak.

Bear in mind: you’ll need to plan the cable route and any extra equipment. With the Deco system, the operating mode affects which Ethernet connections are available.

Buying priority What to check Who should pay particular attention?
Wi-Fi where you read Check the connection on every floor you need and whether there’s still adequate reception where you plan to put the node. If I download magazines on several floors, I want a usable connection wherever I’m reading. Around 40% of consumers put Wi-Fi coverage first.
Keeping your existing router Check the exact router model against the extension and confirm which operating mode it supports. If my internet connection is working, I’d rather add a suitable device than replace my router unnecessarily. Around 23% of consumers prioritise keeping and extending their existing router.
Connection between floors Check whether there’s a wireless signal where you plan to put the additional Wi-Fi point, or whether you can use an Ethernet cable. If the wireless connection between floors is weak, I want to connect additional Wi-Fi points by cable wherever possible. Around 22% of consumers prioritise the connection between floors.
Connection type and security If you’re replacing your router, check your connection type. Also check whether the device can receive firmware updates. If I replace my main router, it needs to be compatible with my connection and capable of being kept up to date. Around 15% of consumers prioritise connection compatibility and update options.

Common buying mistakes

  • Assuming the advertised peak Wi-Fi speed is guaranteed on every floor

    An advertised wireless speed doesn’t tell you what sort of connection will reach your actual reading spot through the floors of your home.

    Check the connection where you need it before choosing between a single router, a wireless extension and an Ethernet connection.

    Depending on where you place your equipment, you may still need an additional Wi-Fi point or a cable connection later.

  • Confusing a single-unit mesh pack with a multi-unit system

    TP-Link sells the Deco X50 in different pack sizes; the 2-pack label doesn’t describe what comes in a 1-pack.

    Check the pack size and plan how many places need Wi-Fi.

    You may need another unit to cover additional areas.

  • Choosing a router as a DSL replacement based on its Wi-Fi features alone

    The FRITZ!Box 7690 is specified as having a DSL connection. The manufacturer’s specifications for the ASUS RT-AX58U list Ethernet WAN, but no integrated DSL modem.

    Check your connection type and existing modem against the specifications for the exact model.

    A suitable modem may also be needed for a DSL connection.

Brands to consider

FRITZ!

Worth considering if you’re looking for a DSL router or want to extend an existing FRITZ! network.

  • For the 7690, FRITZ! lists DSL, operation behind an external modem and mesh extension over LAN.
  • These manufacturer specifications don’t guarantee coverage on a particular floor or compatibility with every extension.

TP-Link

The Deco X50 is worth considering if you’re planning a multi-unit mesh system with the option of a wired connection.

  • TP-Link lists three Gigabit ports per Deco X50 unit, with optional Ethernet backhaul.
  • The stated coverage area comes from the manufacturer; it isn’t a measurement taken in your home. A 1-pack doesn’t include multiple nodes for different floors.

Telekom

A Speedport and Speed Home WLAN combination may suit homes looking to extend a compatible Speedport they already own.

  • Telekom lists Ethernet and Wi-Fi as connection options for Speed Home WLAN.
  • Before buying, check the model-specific information from Telekom to confirm compatibility with your exact Speedport model.

ASUS

The RT-AX58U may suit an existing modem setup or a compatible network configuration.

  • ASUS lists AiMesh and access point modes, as well as a Gigabit WAN port, for the RT-AX58U.
  • An integrated DSL modem isn’t listed in the specifications provided, so there’s no evidence that the device can replace a direct DSL connection on its own.

NETGEAR

Orbi systems may be an option if you’re planning separate Wi-Fi points and the wireless connection between the router and satellite is a challenge.

  • NETGEAR describes Ethernet backhaul as a possible way to connect Orbi units.
  • Check the model and what’s included with the specific Orbi set you’re considering; the features described don’t necessarily apply to every version.

Related products on Joybuy

This selection includes mesh systems for extending Wi-Fi, additional wired access points and routers for switching to a compatible connection.

TP-Link Deco BE22 mesh Wi-Fi 7 system, 2-pack

TP-Link Deco BE22 Mesh Wi-Fi 7 System (2-pack)

A suitable option if you want to use two mesh units to extend your Wi-Fi and keep using an existing router in access point mode.

Dual-band system with Gigabit Ethernet, according to the product name; router and access point modes are listed as operating modes.

View on Joybuy
Ubiquiti U7 Mesh with Power over Ethernet

Ubiquiti U7 Mesh

A wired Wi-Fi point worth considering if you’re planning an Ethernet connection.

The product name lists 5000 Mbit/s and Power over Ethernet. It requires a PoE power supply over Ethernet to operate.

View on Joybuy
TP-Link Deco M4 mesh Wi-Fi system AC1200, 3-pack

TP-Link Deco M4 Mesh Wi-Fi System AC1200 (3-pack)

An option if you want to set up several Wi-Fi points and keep using your existing router in access point mode.

The product name lists a dual-band system with Gigabit ports; the set contains three units.

View on Joybuy
FRITZ!Box 7590 AX Wi-Fi 6 DSL router

FRITZ!Box 7590 AX Wi-Fi 6 DSL Router

Worth considering if you’re looking for a DSL router that, according to the product name, can also be used as a FRITZ! Mesh master.

The product name lists a VDSL Supervectoring 35b modem, DECT base station, VoIP telephony and 4 × Gigabit LAN. FRITZ!Repeaters or other FRITZ! devices are intended for the mesh extension described.

View on Joybuy
MERCUSYS Halo H25BE mesh Wi-Fi 7 set, 2-pack

MERCUSYS Halo H25BE Mesh Wi-Fi 7 Set (2-pack)

An option if you want to set up two mesh units and use additional wired connections on one of the nodes.

The product name lists Wi-Fi 7 BE3600, dual-band and three Gigabit ports per unit. The second unit should be placed within range of the first.

View on Joybuy

Frequently asked questions

Do I need to replace my router if downloads keep stalling on just one floor?

Not necessarily. Check the connection where you read and whether you can place a suitable additional Wi-Fi point there with a strong enough signal, or connect it via LAN.

Where should I place a wireless Wi-Fi extender?

Put it somewhere it can still get a usable connection to the router or another node. If the connection is weak, Telekom recommends placing Speed Home WLAN closer to the Speedport or another Wi-Fi extender.

How can I keep my router secure after buying it?

Keep the firmware up to date and use automatic updates if they’re available. Germany’s Federal Office for Information Security notes that updates can also fix security vulnerabilities. If your device is supplied by your internet provider, you can ask whether its firmware is updated remotely.

Can I use my own compatible router in Germany?

Yes. Germany’s Federal Network Agency explains that you’re free to choose a suitable router for your internet connection and that your provider must supply the necessary access details. Even so, check that the specific device is compatible with your connection.