Who needs to make this decision?

People who back up files across floors regularly

If you regularly back up work documents to a destination on another floor, the connection needs to work across the entire route. The BSI also considers data restoration part of a complete data backup strategy.

Homes with heavily insulated floors

Ceilings and walls can affect wireless connections, as devolo explains in its guidance on potential sources of interference in a home network. Depending on the building, you could use Wi-Fi, an existing Ethernet cable or test the electrical wiring.

Users with an existing router ecosystem

If you want to add a device to an existing FRITZ!, Speedport or compatible mesh system, check your exact router model and the supported operating mode. FRITZ!, TP-Link and Telekom outline the requirements for their respective mesh or router combinations.

What should you look for when buying?

For backups across multiple floors, what matters is the route to the actual backup destination. A high wireless rating alone doesn’t tell you how well the connection will work in your home.

Wireless repeater

A good choice if: there is still a strong enough signal from the router at the planned midway point and you don’t want to run a cable.

Bear in mind: Ceilings and walls can affect the connection between the router, repeater and backup destination.

LAN bridge or wired access point

A good choice if: an Ethernet cable reaches the other floor and you want to avoid a wireless connection between floors.

Bear in mind: The cable needs to reach the installation point; an Ethernet port alone doesn’t confirm which operating modes will work with every router.

Powerline with a Wi-Fi access point

A good choice if: you don’t have an Ethernet cable and the wireless connection between floors isn’t strong enough.

Bear in mind: Sockets and electrical interference can affect transmission, so test the connection at the sockets you plan to use.

Priority What to check before buying Who it matters most to
Connection between floors Signal at the planned midway point; for powerline, test the actual sockets. If I regularly back up documents between floors, I need a reliable connection all the way to the destination and don’t want to rely on wireless ratings alone. That’s why around 40% of consumers put a reliable connection between floors first.
Connecting to the router Exact router model and firmware; supported mesh or operating mode. If I want to keep using my existing router system, the specific combination needs to be compatible. That’s why around 23% of consumers prioritise compatibility with their existing router.
Throughput to the backup destination The whole connection chain to the local or remote destination; the Ethernet ports you need. If I’m backing up larger volumes of documents, what matters is the usable throughput to the actual destination, not the rating of a single port or wireless connection. That’s why around 22% of consumers prioritise the speed at which their files are transferred.
Restorable backup Separate backup destination and backup plan; test restoration regularly. If I need to recover work documents in an emergency, I need more than a good network connection. That’s why around 15% of consumers put secure restoration first.

Common buying and planning mistakes

  • Putting the repeater in a Wi-Fi dead zone

    A repeater needs its own connection to the router. If the connection is weak, Telekom recommends positioning Speed Home WLAN closer to the router or another booster.

    Check the incoming signal at the planned location. If it’s too weak there, a LAN bridge could be an option if you have an Ethernet cable.

  • Assuming advertised Mbit/s figures equal backup throughput

    Wireless or powerline speed ratings don’t prove how fast the entire connection will be. devolo notes that electrical interference can affect data transmission over the mains.

    Assess the route to the actual backup destination and test powerline using the sockets you plan to use.

  • Assuming mesh works the same way everywhere

    Requirements vary by device and router. For the 1200 AX, FRITZ! describes LAN bridge operation with mesh integration when used with a FRITZ!Box running FRITZ!OS 7 or later; TP-Link says EasyMesh requires a compatible router.

    Before buying, check your exact router model and firmware, as well as the supported mesh or LAN bridge mode.

  • Confusing better Wi-Fi with a completed backup

    A repeater may improve the connection, but it won’t create a backup automatically or prove that files can be restored. The BSI treats backup and restoration as separate parts of a data backup strategy.

    Plan your backup destination and process separately from your Wi-Fi, and test whether you can restore important documents.

Key brands to consider

FRITZ!

An option for existing FRITZ!Box systems if you need a compatible mesh or LAN bridge feature.

  • For the 1200 AX, FRITZ! describes a LAN bridge with mesh integration when used with a FRITZ!Box running FRITZ!OS 7 or later.
  • According to FRITZ!, the FRITZ!Repeater 6000 has one 2.5 Gigabit LAN port and one Gigabit LAN port. These port ratings don’t indicate backup speeds across multiple floors.

TP-Link

The RE705X is worth considering if you’re looking for a repeater with a Gigabit Ethernet port and access point mode.

  • TP-Link says EasyMesh can be used to connect to a compatible router.
  • Whether the mesh setup you want will work depends on the specific router combination. Advertised wireless speeds are maximum figures provided by the manufacturer.

devolo

The Magic-2-WiFi range combines powerline with a Wi-Fi access point, giving you a way to test the electrical wiring at the sockets you plan to use.

  • devolo offers a multi-room kit for covering several rooms or floors.
  • Sockets and electrical interference can affect throughput. For the Magic 2 WiFi next, devolo says older dLAN adapters aren’t supported.

Telekom

Speed Home WLAN is aimed at users who want to extend their Wi-Fi with a compatible Speedport router.

  • Telekom describes extending coverage with multiple boosters and lists compatible Speedport routers.
  • Check your exact router model and the requirements for setup and mesh features. If the connection is weak, Telekom recommends moving the device closer.

Joybuy products for different connection options

The range includes access points for Ethernet and PoE connections, as well as wireless repeaters that need a strong enough router signal at the installation point.

Ubiquiti UniFi U7 Lite WiFi 7 access point, dual-band, 2.5 GbE, PoE+ in white

Ubiquiti UniFi U7 Lite WiFi 7 access point, 2.5 GbE, PoE+

Designed for use with an Ethernet connection and a suitable PoE power supply; the product name specifies WiFi 7, 2.5 GbE and PoE+.

It requires an Ethernet connection and PoE power supply. According to the product details, you can use a compatible PoE switch or injector.

Joybuy
Ubiquiti U7 Mesh access point with Power over Ethernet

Ubiquiti U7 Mesh

For a planned access point installation using Ethernet and PoE; check in advance that the intended mesh setup is compatible with your network.

The product name specifies Power over Ethernet. The described setup uses Ethernet and PoE+; UniFi Network is specified for configuration.

Joybuy
TP-Link RE190 AC750 Wi-Fi repeater

TP-Link RE190 AC750

For extending your wireless coverage if there is still a strong enough router signal at the planned midway point.

The product name identifies this as a wireless repeater. The signal strength indicator can help you choose a location; the advertised speed doesn’t guarantee backup throughput.

Joybuy
MERCUSYS ME80X Wi-Fi 6 range extender with Gigabit port and access point mode

MERCUSYS ME80X Wi-Fi 6 Range Extender, AX3000

For extending your wireless coverage or using as an access point, provided a router signal or Ethernet connection is available where you plan to use it.

The product name specifies dual-band, a Gigabit port and access point mode. Access point mode requires an Ethernet connection to the router; in repeater mode, the device needs to be within range of the router.

Joybuy
TP-Link RE235BE BE3600 dual-band Wi-Fi 7 range extender with 2.5 Gigabit port

TP-Link RE235BE BE3600 Wi-Fi 7 Range Extender

For extending your wireless coverage if there is still a strong enough signal at the planned location and you have a compatible router for EasyMesh.

The product name specifies dual-band Wi-Fi 7 and a 2.5 Gigabit port. EasyMesh requires a compatible router; advertised wireless speeds don’t prove backup speeds across multiple floors.

Joybuy

Frequently asked questions

Where should I place a wireless repeater?

Place it somewhere it can still receive a strong enough signal from the router, rather than in the shielded room you’re trying to reach. If the connection is weak, Telekom recommends placing Speed Home WLAN closer to the router or another booster.

Do I still need a wireless uplink if I have an Ethernet cable?

Not necessarily. According to FRITZ!, the FRITZ!Repeater 1200 AX can operate as a LAN bridge; TP-Link describes an Ethernet-based access point mode for the RE705X. Check the specific operating mode and your device’s requirements.

Can I combine older devolo dLAN adapters with Magic adapters?

The Magic 2 WiFi next doesn’t support devolo’s older dLAN range. The manufacturer lists adapters in the Magic range as compatible; check the exact product range before adding to an existing set.

Does a repeater replace a tested backup?

No. A repeater extends your network connection, but it doesn’t create a backup automatically. The BSI treats backup and restoration as separate parts of a data backup strategy, so you should also test whether you can restore important files.

What should I check when buying a Wi-Fi device in Germany?

Wi-Fi radio equipment placed on the market in Germany must carry the required CE marking. The Bundesnetzagentur also lists the correct product identification, conformity documents and required German-language accompanying information as things to check. A CE mark doesn’t prove a device’s range or backup throughput.