Cookery class behind several walls
You want to watch and listen from a fixed spot in the kitchen, while the router is in another room. What matters is the connection where you’re watching, not just the maximum speed listed on the router.
First, compare the same stream by the router and in the kitchen: if it only struggles in the kitchen, the Wi-Fi connection may be a bottleneck; if it buffers near the router too, an extra node won’t necessarily solve the underlying problem. If you can run an Ethernet cable close to the kitchen, consider a wired access point. Without a cable, you could try a repeater somewhere with a decent router signal, or powerline after testing it at the sockets you plan to use. A new standalone router with higher Wi-Fi specifications won’t guarantee reception through thick walls.
You want to watch and listen from a fixed spot in the kitchen, while the router is in another room. What matters is the connection where you’re watching, not just the maximum speed listed on the router.
You can connect an extra access point near the kitchen using an Ethernet cable, and want to avoid relying on a wireless signal travelling through walls between rooms.
You need a connection you can add to your setup and need to weigh up whether a wireless repeater has a suitable location, or whether powerline works at the sockets you plan to use.
With thick walls, your choice largely depends on how an extra access point can connect to the router: by Ethernet, over a decent wireless connection or through the mains wiring.
A good option if: You can run an Ethernet cable close to the kitchen and the wireless signal through the walls is weak.
Bear in mind: You’ll need a cable route, a power supply and a device with a suitable operating mode.
A good option if: There’s no way to run a cable, but a potential location still gets a decent signal from the router.
Bear in mind: The repeater needs a strong enough wireless connection to the router itself; several signal-blocking walls can weaken it.
A good option if: You can’t run an Ethernet cable or find a suitable location for a repeater, and can test powerline at the sockets you plan to use.
Bear in mind: The connection depends on the wiring in your home and any sources of interference.
The table groups consumers by their main priority when choosing a solution for streaming in the kitchen.
| Priority | What to check before buying | Who is this important to? |
|---|---|---|
| Reception in the kitchen | Test the same stream near the router and at the intended viewing location. | If I want to follow the class from a fixed spot in the kitchen, a stable stream right there matters most to me. Around 36% of consumers put reception where they watch first. |
| Connecting the access point | Check whether an Ethernet cable is an option and which operating mode suits your existing setup. | If you can connect an access point with an Ethernet cable, you can avoid relying on a wireless connection between the devices. Around 29% of consumers prioritise a wired extension. |
| Adding a connection without a cable | Find a location for the repeater that gets a signal from the router, or test powerline at the sockets you plan to use. | If I can’t run an Ethernet cable close to the kitchen, I need a connection I can set up without one. Around 21% of consumers prioritise an upgrade that doesn’t need an Ethernet cable. |
| Router and broadband connection | Check the connection type before replacing your router; when extending your setup, take your existing router and the operating mode into account. | If you need to replace an unsuitable router or match the solution to your internet connection, connection compatibility comes first. Around 14% of consumers put this at the top of their list. |
Walls and the device’s location affect reception in your home. Manufacturers’ specifications don’t tell you what connection you’ll get in the kitchen.
Compare playback in the kitchen with playback near the router, and only plan to add an access point once you’ve done this test.
A repeater needs to receive data from the router too. If the connection is weak where you put it, that can limit how well it extends your network.
Look for a location with a decent router signal or, if possible, connect the access point by Ethernet.
devolo points out that some sockets may deliver low transfer rates, and electrical devices can interfere with the connection.
Test the connection at the sockets you plan to use under your usual conditions.
An extra access point can work alongside your existing internet router. A replacement router, however, needs to be compatible with your connection type.
Check your existing connection and router first; then decide whether you need an extension or a replacement.
For an existing FRITZ! home network, you could add a repeater to extend coverage or consider a router as a possible replacement.
The Deco X50 range is an option for adding mesh access points, with the possibility of an Ethernet connection.
Depending on your setup, the ZenWiFi XD5 can operate as a router, an AiMesh node or an access point.
The Magic 2 WiFi 6 next Starter Kit uses your mains wiring for powerline and provides Wi-Fi from the adapter in the room you want to reach.
The products below include mesh and repeater options, as well as an access point that supports a wired connection. Which option works in your kitchen depends on the signal where you place it and the connection available.
No image available
For extending your mesh network while continuing to use your existing router.
No image available
For extending your network with a wired Ethernet uplink and PoE power.
No image available
For extending your mesh network across several rooms while keeping your existing router.
No image available
For extending your Wi-Fi wirelessly, if you can find a spot between the router and kitchen that still gets a signal from the router.
No image available
For extending your Wi-Fi, provided the repeater’s location still gets a signal from the router.
Compare playback of the same class near the router and at the spot you plan to use in the kitchen. If it already struggles near the router, an extra Wi-Fi node won’t necessarily solve the underlying problem. YouTube recommends a continuously available connection of 5 Mbit/s for 1080p playback; this isn’t a guaranteed requirement from your cookery class provider.
In access point mode, TP-Link describes connecting a satellite to another Deco unit or to your existing modem or router. Router mode uses different cabling rules to prevent a network loop, so set up the connection according to the operating mode you’re using.
For regular use, devolo recommends plugging adapters directly into wall sockets rather than extension leads, and testing them at the sockets you plan to use. Nearby power supplies and dimmer switches can affect data transmission.
Yes. According to the Federal Network Agency, customers can connect a suitable router of their choice that’s available on the market. Even so, check that the specific device is compatible with your connection type.
According to the Federal Network Agency, the manufacturer uses the CE marking to declare, under its own responsibility, that the product complies with the relevant legal requirements. It doesn’t prove a particular range or streaming stability.