Who’s facing this decision?

Students with a Wi-Fi dead zone on another floor

If your lecture works near the router but not at your usual study spot, check the connection right there. The location and connection of an additional Wi-Fi access point matter more than its advertised top speed. F.A.Z. Kaufkompass highlights a wired backhaul as a potential advantage for mesh data transmission.

Students with an Ethernet cable between floors

If you can connect your study space via LAN, check whether the Wi-Fi access points support Ethernet backhaul or a suitable access point mode. TP-Link describes Ethernet backhaul for Deco systems; the specific mode depends on the model and your setup.

Households with an existing router

If you want to keep your router, compatibility and operating mode are important factors in your choice. Telekom notes that Speed Home WLAN works as a repeater in its described setup process when used with a router that isn’t mesh-compatible. According to Telekom, the number of additional devices you need depends on your home and router.

What to consider when buying

Wired access point or mesh node

When it’s a good fit: When your lecture works near the router but freezes on another floor, and there’s a suitable LAN connection there.

What to consider: Check the cable route, available ports and operating mode that works with your existing router.

Wireless Wi-Fi extender

When it’s a good fit: If you want to keep your existing router and there’s still a strong enough connection where you plan to put the additional access point.

What to consider: Without a cable, the connection between devices depends on signal strength, location and the right operating mode.

Replace your router

When it’s a good fit: If your existing router isn’t compatible with your internet connection or preferred extension system, or you’re already having connection problems near the router.

What to consider: A new router on its own won’t guarantee coverage across several floors. You’ll also need to consider your connection and whether you need additional Wi-Fi access points.

For a live lecture across several floors, work out whether the problem is at your study spot, with the connection between Wi-Fi access points or with your existing internet setup.

Priority What to look for Who it matters most to
Wi-Fi at your study spot Check the connection at your study spot and at possible locations for additional Wi-Fi access points. If I can watch the lecture near the router but not reliably at my study spot on another floor, coverage right there is what matters to me. Around 36% of consumers prioritise this kind of dead zone between floors.
Connection between Wi-Fi access points Check for existing LAN cables and Ethernet backhaul. If there’s no cable, consider signal strength where you plan to put the node. While streaming, I want the connection between the router and additional access point to be reliable too. Around 29% of consumers focus on this backhaul connection.
Router and connection compatibility Make a note of your router model and internet connection type, then check which mesh, repeater or access point mode works with your setup. If I want to keep my router, I want to know in advance which operating mode will work with it. Around 21% of consumers prioritise this compatibility.
Size of the system you need Consider pack size, how many Wi-Fi access points you need and what hardware you already have for the complete setup. I want to work out which devices and connections I need for my study spot, rather than looking at a single device in isolation. Around 14% of consumers focus on the size of the complete system.

Common buying mistakes

  • Replacing your router just because it has a higher advertised data rate

    A general router ranking won’t tell you how reliably the signal travels through the floors of a particular building.

    Compare the connection at your study spot with the one near the router, and check whether an additional Wi-Fi access point would have a reliable backhaul there.

  • Putting a wireless node in the dead zone

    An additional Wi-Fi access point still needs a decent connection to the rest of your network. If its location already has poor coverage, the backhaul can become a bottleneck.

    Check the signal at the planned location. Use a suitable LAN cable if one is available between floors.

  • Assuming different devices all support the same mesh features

    Telekom distinguishes between mesh operation and basic repeater operation for Speed Home WLAN when it’s used with a router that isn’t mesh-compatible.

    Before buying, check the exact model combination and the operating mode you need.

Key brands to consider

FRITZ!

Worth considering if you already have a FRITZ!Box or need a router for your specific internet connection.

  • According to FRITZ!, the FRITZ!Box 5690 Pro is designed for DSL and certain fibre connections. The FRITZ!Repeater 3000 AX has two Gigabit LAN ports.
  • These model details don’t indicate how well the signal will travel through floors. A repeater doesn’t replace a modem for your internet connection.

TP-Link

The Deco range is an option if you want to use several Wi-Fi access points or run them behind an existing router.

  • TP-Link documents an access point mode and Ethernet backhaul for Deco.
  • Check the exact model, pack size and how the satellite units connect. The available operating modes don’t guarantee signal quality in a particular building.

ASUS

ZenWiFi XD5 is a mesh option for households looking to use several Wi-Fi access points or existing Ethernet cables.

  • ASUS lists router, access point and AiMesh node modes, as well as Ethernet backhaul, for the XD5.
  • The XD5 is a dual-band model. Manufacturer claims about coverage area and data rates don’t guarantee coverage across several floors.

Telekom

Speed Home WLAN is particularly relevant if you want to extend an existing Speedport or compatible router.

  • Telekom describes setting up the mesh connection using WPS.
  • According to Telekom, the device works only as a repeater in this setup process when used with a router that isn’t mesh-compatible. The number of additional devices you need depends on your home and router, according to Telekom.

NETGEAR

Orbi 970 is a mesh range to consider if you’re looking into a more extensive setup.

  • NETGEAR advertises a dedicated backhaul and fast wired connections for this range.
  • These manufacturer claims don’t demonstrate a particular advantage for a single live lecture or the actual coverage on a specific floor.

Joybuy products for extending your Wi-Fi

This selection includes mesh kits and a Wi-Fi range extender for adding to an existing router. Check whether you need several Wi-Fi access points, a wired backhaul or just one additional wireless access point.

TP-Link Deco BE22, 2-pack, Wi-Fi 7 mesh system

TP-Link Deco BE22, 2-pack, Wi-Fi 7 mesh system

This two-unit kit is worth considering if you want to extend your existing router’s coverage with additional Wi-Fi access points.

Wi-Fi 7, dual-band, Gigabit Ethernet and a white finish; the product name specifies a two-unit kit.

View at Joybuy
TP-Link Deco M4, 3-pack, AC1200 mesh Wi-Fi system

TP-Link Deco M4, 3-pack, AC1200 mesh Wi-Fi system

This three-unit kit is an option if you want to set up several Wi-Fi access points and keep using your existing router.

AC1200, dual-band, Gigabit ports and seamless roaming are listed in the product name.

View at Joybuy
TP-Link Deco S4, 3-pack, AC1200 mesh Wi-Fi system

TP-Link Deco S4, 3-pack, AC1200 mesh Wi-Fi system

This three-unit kit is worth considering if you want to improve coverage in several areas with additional Wi-Fi access points.

AC1200, dual-band and Gigabit ports are listed in the product name.

View at Joybuy
MERCUSYS Halo H3000X, 2-pack, Wi-Fi 6 AX3000 mesh system

MERCUSYS Halo H3000X, 2-pack, Wi-Fi 6 AX3000 mesh system

This two-unit kit is an option if you want to tackle a Wi-Fi dead zone with additional mesh access points.

Wi-Fi 6, AX3000, dual-band, MU-MIMO and three Gigabit ports per unit are listed in the product name.

View at Joybuy
MERCUSYS ME80X Wi-Fi 6 AX3000 range extender

MERCUSYS ME80X Wi-Fi 6 AX3000 range extender

This extender is an option if you’re considering a single additional Wi-Fi access point. For wireless use, the product information recommends placing it roughly halfway between the router and the area with a weak signal.

Dual-band, one Gigabit port, a signal strength indicator and access point mode are listed in the product name. Its nominal speeds are listed as 574 Mbit/s at 2.4 GHz and 2,402 Mbit/s at 5 GHz.

View at Joybuy

Frequently asked questions

How can you tell whether the Wi-Fi or your internet connection is disrupting the lecture?

Compare the connection at your study spot with the one right next to the router, and, if possible, check a LAN connection too. If the problem only occurs well away from the router, the local Wi-Fi connection is an obvious place to start. Bandwidth or your device could also affect video quality, so this comparison alone won’t give you a definitive diagnosis.

How do you set up a Deco system behind an existing router?

If you want your existing router to continue managing your internet connection, TP-Link recommends using access point mode. In this mode, Deco doesn’t create its own subnet. TP-Link also describes Ethernet backhaul, which lets you connect the nodes by cable after the initial setup.

Can you use your own router with an internet connection in Germany?

In general, you can use your own suitable end device. According to the Bundesnetzagentur, your provider must supply the necessary access details, but you’ll still need to check that the specific device is compatible with your connection. In 2025, the Bundesnetzagentur confirmed that customers’ right to choose their own end devices still applies to passive optical fibre networks.

What should you look for in a Wi-Fi device for use in Germany?

Look for clear EU conformity information. The Bundesnetzagentur describes the CE marking as a declaration made by the manufacturer on its own responsibility, not an independent quality mark. The 2025 notice 76/2025 concerns the specified 6 GHz frequency band and supersedes the earlier notice 12/2025; it doesn’t indicate whether you’ll get coverage across several floors.