Who is a Wi-Fi repeater suitable for?

Learners with a Wi-Fi dead spot

If you download course materials at a regular study spot on another floor, you need to place the repeater somewhere it still gets a good connection to the router. devolo recommends checking the signal at the repeater’s intended location.

Learners with a LAN connection

If you can use a network connection at your study spot or on the same floor, consider a model with access point mode to provide a wired access point. TP-Link describes this operating mode for the RE705X.

Households with several study spots

If people study on different floors or use several devices, choosing suitable locations and checking that the access points are compatible with the router are both important. FRITZ! and Telekom list mesh features for compatible devices and routers.

What should you look for when buying?

First, check whether there’s a location for the repeater with good reception from the router. If not, an available LAN connection and compatibility with your chosen mesh setup are key.

A single wireless repeater

Suitable if: There’s a spot between the router and your study area with good reception, and you only need to extend coverage to a limited area.

Bear in mind: devolo points out that a repeater can only pass on a weak incoming signal.

A LAN access point

Suitable if: There’s a usable LAN connection on the floor with poor coverage. TP-Link and devolo offer access point mode on compatible models.

Bear in mind: You’ll need a suitable cable connection and a device that supports the operating mode you need.

Several mesh access points

Suitable if: You need coverage for study areas on several floors and your router and access points work together as part of the chosen setup.

Bear in mind: Extra devices add to the set-up process, and mesh compatibility depends on the specific devices.

Consideration What to check before buying Who is this most important for?
Reception and placement Check the router signal at possible repeater locations, as well as the connection at your study spot. If you download course materials in a room on another floor, choose a location with good reception from the router. Around 33% of consumers put reception and placement first.
Wired connection Check whether a LAN connection is available and whether the specific model has access point mode. If the wireless connection between floors is weak, an available LAN connection at your study spot could make all the difference. Around 27% of consumers prioritise a wired connection.
Router and mesh compatibility Check your router model against the requirements of your chosen mesh setup. If you need to provide access points for several study areas, they must work with your existing router. Around 20% of consumers prioritise mesh compatibility.
Download performance Test downloads at your study spot and don’t assume the advertised gross Wi-Fi data rate is the same as your download speed. If you download course files at your study spot, the connection you can actually use there matters more than an advertised maximum rate. Around 20% of consumers put download performance first.

Common buying mistakes

  • Placing the repeater in a Wi-Fi dead spot

    If the device already receives a weak signal where it’s placed, its connection to the router will remain a weak point.

    First, find a spot with a good connection to the router, then test reception at your study area. If that isn’t possible, check whether a LAN connection is available.

  • Assuming the maximum Wi-Fi data rate is your download speed

    An advertised gross Wi-Fi data rate isn’t the same as the usable data rate available for downloading files. FRITZ! highlights this difference.

    Don’t choose a model based solely on the highest Mbit/s figure. Test downloads at your study spot using your own device.

  • Assuming router compatibility means full mesh compatibility

    A repeater may connect to a Wi-Fi router without supporting all mesh features. TP-Link states that EasyMesh requires a compatible router.

    Before buying, check your specific router model against the requirements of the mesh feature you want to use.

    Mesh coverage across several floors may require additional compatible access points and more set-up work.

Key brands at a glance

FRITZ!

Options to consider include the FRITZ!Repeater 1200 AX and FRITZ!Repeater 6000, which have different features.

  • FRITZ! lists a Gigabit LAN port for the 1200 AX and three wireless units for the 6000.
  • Mesh connectivity requires compatible FRITZ! devices; the listed features don’t guarantee reception on every floor.

TP-Link

The RE705X is worth considering if you’re comparing wireless repeater and access point modes.

  • TP-Link describes the model as having an Ethernet port and access point mode.
  • According to TP-Link, EasyMesh requires a compatible router.

devolo

The WiFi 6 Repeater 5400 is an option for desktop placement, with repeater or access point mode.

  • According to the devolo manual, this model can operate as a Wi-Fi repeater or an access point.
  • The stated range and speed figures don’t confirm coverage throughout a specific three-storey house.

Telekom

Speed Home WLAN is worth considering if you want to use it as a mesh extension with a compatible Speedport router.

  • Telekom lists Wi-Fi 6 and an Ethernet connection.
  • Check mesh compatibility against your specific router model. Information about Speedport routers doesn’t apply to all other routers.

NETGEAR

The EAX15 is a Wi-Fi 6 repeater option with Gigabit Ethernet.

  • NETGEAR advertises a single Wi-Fi name and Smart Roaming for this model.
  • These manufacturer claims aren’t an independent measurement of floor-by-floor coverage or achievable download speeds.

Joybuy products for this setup

This selection includes wireless repeaters for extending coverage to a limited area, as well as mesh devices and kits with several access points. Before choosing a mesh product, check that it’s compatible with your router and existing devices.

TP-Link RE190 AC750 Wireless Repeater

TP-Link RE190 AC750 Wireless Repeater

An option if you need to extend coverage to a limited area and there’s a spot with adequate reception between the router and your study area.

AC750; 433 Mbps according to the product name.

View at Joybuy
TP-Link Deco M4 Mesh Wi-Fi System AC1200, 3-pack

TP-Link Deco M4 Mesh Wi-Fi System AC1200 (3-Pack)

This 3-pack is worth considering if you need mesh access points to cover several areas. Check that the devices are suitable for the network you plan to use.

AC1200; dual-band; Gigabit ports.

View at Joybuy
TP-Link Deco X10 Mesh Wi-Fi Set, Wi-Fi 6, 1-pack

TP-Link Deco X10 Mesh Wi-Fi Set (1 Pack)

This single unit is an option if you want to extend an existing Deco mesh network.

Wi-Fi 6; AX1500; dual-band; 2 x Gigabit ports.

View at Joybuy
MERCUSYS ME80X Wi-Fi 6 Range Extender AX3000

MERCUSYS ME80X Wi-Fi 6 Range Extender

An option for wireless or access point use. For a wired connection, you’ll need LAN access at your study spot.

AX3000 dual-band; 574 Mbps at 2.4 GHz and 2402 Mbps at 5 GHz; Gigabit port; AP mode; signal strength indicator.

View at Joybuy
TP-Link RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

TP-Link RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

An option for extending an existing Wi-Fi network. A compatible router is required for an EasyMesh setup.

2.5 Gigabit port; MLO; Smart Roaming; EasyMesh compatible.

View at Joybuy

Frequently asked questions

Can I put the repeater in the room with the weakest reception?

Only if it still gets a good connection to the router there. If it receives a weak signal at your study spot, try a location with a better connection or, if you have cabling, use access point mode. devolo highlights the importance of a good incoming signal.

Does an Ethernet port automatically mean it can act as a LAN bridge?

No. Check the operating mode supported by the specific model. TP-Link describes an access point mode for the RE705X, and the devolo WiFi 6 Repeater 5400 manual lists this operating mode too.

Why doesn’t the advertised Mbit/s figure match my course download speed?

The advertised Wi-Fi data rate is a gross data rate, not the usable rate for downloading files. FRITZ! points out that the usable data rate for downloads is lower; your device also affects the Wi-Fi connection.

How can I check whether a mesh repeater is compatible with my router?

Check your exact router model against the requirements of the mesh feature you want to use. TP-Link states that EasyMesh requires a compatible router. According to Telekom, information about mesh use with Speedport routers doesn’t automatically apply to routers from other providers.

Do I need to register a Wi-Fi repeater for private use in Germany?

According to the German Federal Network Agency, no notification is required for Wi-Fi used exclusively for private purposes, although the applicable conditions for radio use still apply. This information comes from a Federal Network Agency service booklet published in March 2019. The agency states that devices covered by the relevant harmonisation legislation and placed on the EU market must carry a CE marking.