Who is this solution for?

Uploading portfolio files through thick walls

If you work some distance from your router, what matters is whether there’s still a usable connection where you plan to put the extender. FRITZ! and devolo’s guidance describes LAN connections and wired use as options for extending your network.

Homes with an existing LAN socket

If you have a usable network cable running to your study, you can use an access point there instead of relying on another wireless connection. devolo describes how its extenders can be used as access points over a wired connection.

Homes with an existing mesh system

If you want to add an extender to your existing system, check that the mesh feature you want is compatible with your specific router model. TP-Link and Telekom each specify requirements for certain mesh or router configurations.

What should you look for when buying?

First, check whether you have a usable LAN connection to your study. Without a cable, an extender is only suitable if it can still get a good signal from your router.

What matters What to check before buying Who is this most relevant to?
Connection through thick walls A socket that still gets a usable signal from the router; the device’s connection indicator. If I work behind a thick wall, the extender itself needs to be able to connect to the router. Around 40% of consumers put wall penetration and range first.
Reliable file uploads Check your broadband upload speed and the Wi-Fi connection at your workplace separately. If portfolio files are slow to upload even when I’m near the router, I want to check whether my internet connection is the bottleneck. Around 30% of consumers prioritise reliable uploads.
Existing network cabling A cable to the room you want to reach; the device’s LAN port and access point mode. If there’s already a LAN socket in my study, I want to avoid sending the signal through the wall wirelessly. Around 20% of consumers prioritise making use of existing cabling.
Mesh compatibility Your router and extender models, plus the requirements for the mesh feature you want. If I want to extend an existing mesh system, I need a feature that works with my router, not just general Wi-Fi coverage. Around 10% of consumers prioritise mesh compatibility.

Common mistakes

  • Putting the extender straight in a dead zone

    An extender still needs a usable connection to your router. If the signal is already weak where you put it, adding coverage in your study may not solve the problem reliably.

    First, try a location where the router signal is still strong. If the wireless connection through the wall isn’t good enough, consider a wired connection.

  • Confusing advertised Wi-Fi speeds with your broadband upload speed

    An advertised Wi-Fi speed doesn’t tell you how well the signal will travel through your home or how fast your broadband connection can upload. Germany’s Federal Network Agency describes its broadband measurement tool as a way to compare actual data transfer rates with the rates agreed in your contract.

    Check your broadband speed and your Wi-Fi connection at your workplace separately before buying more Wi-Fi equipment to tackle slow uploads.

  • Assuming every mesh device is fully compatible

    Extra mesh features may depend on having a compatible router or meeting specific setup requirements. TP-Link states that the RE705X requires an EasyMesh-compatible router for EasyMesh integration.

    Check that your router model, extender model and the feature you want work together, rather than relying on the word ‘mesh’ alone.

Brands to consider

FRITZ!

The FRITZ!Repeater 1200 AX is a compact Wi-Fi 6 extender with a Gigabit LAN port, which may also make it suitable for a LAN bridge.

  • FRITZ! lists Wi-Fi Mesh, a LAN port and a five-year guarantee for this model.
  • The advertised maximum Wi-Fi speed doesn’t tell you what upload speed you’ll get through your walls; the wireless link to the router depends on where you place it.

devolo

According to the manufacturer, the WiFi 6 Repeater 5400 and WiFi 6 Repeater 3000 can be used as wireless extenders or wired access points.

  • If you have existing cabling in your home, you can connect the access point over LAN.
  • Access point mode requires a LAN cable; advertised Wi-Fi speeds aren’t measurements of your upload speed.

TP-Link

The RE705X combines a Gigabit Ethernet port and access point mode with an EasyMesh option specified by the manufacturer.

  • The manufacturer says it can extend Wi-Fi with routers and use EasyMesh with an EasyMesh-compatible router.
  • The EasyMesh listing doesn’t guarantee compatibility with every mesh system.

Telekom

Speed Home WLAN is an option for extending coverage in homes looking to add a compatible device to their Speedport system.

  • Telekom’s instructions describe a connection indicator to help when the router signal is weak.
  • For setup with a Speedport 7 or later, the instructions list additional requirements; check these for your specific router model.

NETGEAR

The manufacturer describes the EAX15 as a plug-in Wi-Fi 6 mesh extender with a Gigabit Ethernet port.

  • The manufacturer’s website lists a Gigabit Ethernet port and a mesh feature.
  • The product details don’t guarantee a particular upload speed through thick walls or that every mesh feature you want will work with every router.

Suitable products at Joybuy

This selection includes wireless extenders, devices with access point mode and a wired Wi-Fi access point. Radio equipment covered by the relevant EU harmonisation legislation and placed on the EU market must carry the CE marking. The Federal Network Agency lists marking and traceability among the points to check. Check the information for the specific product listing.

Wi-Fi extender with access point mode

Wi-Fi extender with access point mode

May be suitable for a wired connection or as a wireless extender, depending on the type of connection available at your chosen location.

The product name lists 1200 MBit/s and 5 GHz. According to the product details, the Ethernet ports support 10/100 Mbps.

View at Joybuy
TP-Link RE190 AC750 Wi-Fi extender

TP-Link RE190 AC750 Wi-Fi extender

An option if you want to extend your Wi-Fi wirelessly and can choose a location based on the existing connection to your router.

The instructions say to place the extender within range of your existing Wi-Fi router.

View at Joybuy
MERCUSYS ME80X Wi-Fi 6 Range Extender

MERCUSYS ME80X Wi-Fi 6 Range Extender

Access point mode is useful for a room with a usable network connection; wireless use requires a suitable connection to your router.

Features listed include dual-band, 574 Mbps at 2.4GHz, 2402 Mbps at 5GHz and a Gigabit port. For access point mode, the description requires an Ethernet connection to the router and selection of the mode in the app.

View at Joybuy
TP-Link RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

TP-Link RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

Designed to extend your Wi-Fi wirelessly if your router’s signal still reaches the intended location.

The product name lists a 2.5G Multi-Gigabit port and EasyMesh. The instructions say that the extender needs to be within range of your existing Wi-Fi router for wireless use; EasyMesh requires a compatible router.

View at Joybuy
Ubiquiti UniFi U7 Lite WiFi 7 Access Point

Ubiquiti UniFi U7 Lite WiFi 7 Access Point

May be suitable if Ethernet reaches your distant room and you want to install a Wi-Fi access point there with a wired connection.

The product name lists dual-band, 2.5GbE and PoE+. According to the product description, an Ethernet connection and a compatible PoE+ switch or injector are required; the device is designed for wall or ceiling mounting.

View at Joybuy

Frequently asked questions

Where should I place a wireless extender if I have thick walls?

Don’t place it where the connection to your router has already dropped out. Try a socket where the signal is still good and use the connection indicator on the specific device. If the wireless link is weak, a wired connection may be more suitable.

Will a faster extender speed up uploads on my broadband connection?

No. An extender won’t increase the upload speed provided by your internet package. If uploads are slow, first check your broadband speed, then check the Wi-Fi connection at your workplace separately. The Federal Network Agency describes its broadband measurement tool as a way to compare actual data transfer rates with the rates agreed in your contract.

What else do I need for access point mode?

You’ll need a usable LAN connection to the location where you want to use the access point. Depending on the device, a particular setup process or additional requirements may also apply. Check the instructions for the specific model and its guarantee terms.

What requirements apply to a Wi-Fi device sold in Germany?

Radio equipment covered by the relevant EU harmonisation legislation and placed on the EU market must carry the CE marking. The Federal Network Agency lists marking, traceability and manufacturer details among the points to check; a product page alone doesn’t confirm this information for a specific device.