Which solution is right for you?

Club managers dealing with Wi-Fi dead zones

If you need to access the archive across several floors, you’ll need to plan where additional Wi-Fi access points can go and how they’ll connect to the network. F.A.Z. Kaufkompass highlights the need for a strong enough wireless connection between mesh stations.

People looking after an existing router

If you want to keep your current router, check whether a compatible extension can connect over Wi-Fi or through a LAN bridge. FRITZ! and TP-Link document connection options for specific devices and operating modes.

People managing archive and guest access

If archive devices and visitor access need to be treated differently, plan your guest network separately from internal access permissions. The German Federal Office for Information Security (BSI) describes a separate guest Wi-Fi network as a network isolated from the internal one.

What to consider when buying Wi-Fi for a club archive

Extend your existing router

Best if: Your existing router is suitable for your internet connection and supports a compatible extension.

The trade-off: You can keep your existing router, but the extension must be compatible and correctly positioned. FRITZ!, for example, documents a LAN bridge for the FRITZ!Repeater 2400.

Multi-unit mesh system

Best if: You need additional Wi-Fi stations across several floors and can connect them with a strong enough wireless signal or supported Ethernet backhaul.

The trade-off: Without cabling between floors, the wireless connection between stations depends on where you place them. F.A.Z. Kaufkompass notes that a sufficiently strong connection is essential.

Wired access points

Best if: Ethernet is available or can be run to suitable locations, and you want to manage your Wi-Fi access points centrally.

The trade-off: You won’t need a wireless connection between floors, but you’ll need to plan for cabling, power and set-up. Ubiquiti offers access points and PoE switches for this type of installation.

Consideration What to check before buying Who is this important to?
Coverage and backhaul Check where the archive will be used, and whether wireless or Ethernet backhaul is supported. If I use the archive across several floors, I need a reliable connection in the places that matter. Around 33% of consumers put coverage first.
Internet connection and existing router Check whether you have DSL, cable, fibre or an external modem, then confirm the system’s router and access point modes. If I want to keep my existing router, the extension must work with both my internet connection and the device. Around 27% of consumers make this their main consideration.
Archive and guest access Check for a guest network, the access permissions available and how they are kept separate. I want visitors to be able to use Wi-Fi without automatically gaining access to the internal archive network. Around 20% of consumers prioritise separating access.
Set-up and ongoing management Check the cabling and power sockets already available, whether PoE power is needed, and who will manage the system and updates. If I look after the installation for my club, it needs to suit our cabling and the support we can provide. Around 20% of consumers say set-up effort is the deciding factor.

Common Wi-Fi planning mistakes

  • Comparing only the advertised Wi-Fi speed of the main router

    For floors further away, the connection between mesh stations matters too. F.A.Z. Kaufkompass points out that the wireless backhaul needs to be strong enough.

    Start by planning possible locations and the backhaul before comparing router specifications.

  • Connecting a mesh system without checking your existing modem router

    Router and access point modes use different network set-ups. TP-Link and ASUS explain the cabling and operating requirements for their respective systems.

    Check your internet connection, existing equipment and the instructions for your specific mesh system together.

  • Giving visitors access to the archive network’s Wi-Fi

    Using a shared network can leave visitor devices connected to your internal archive network. The BSI describes a separate guest Wi-Fi network as an isolated network.

    Set up archive permissions separately from guest access, and check that the two are properly isolated.

Key brands and their installation options

FRITZ!

Routers and compatible repeaters can extend your existing network, provided they suit your internet connection and work together.

  • FRITZ! documents a LAN bridge for the FRITZ!Repeater 2400.
  • Not every repeater has a LAN port, so check the specific model and where you plan to place it.

TP-Link

Deco mesh systems add extra Wi-Fi stations, which can connect wirelessly or over Ethernet, depending on the model and set-up.

  • TP-Link documents Ethernet backhaul and different operating modes for Deco units.
  • Cabling and connections depend on whether the system is in router or access point mode. You’ll need to assess coverage across the floors in your building.

ASUS

With a compatible combination of devices, AiMesh and ZenWiFi systems can support an expandable installation with Ethernet backhaul.

  • ASUS explains router and AP modes, as well as Ethernet backhaul for different connection set-ups.
  • Switches and cabling must suit the combination you choose. Advertised coverage areas or data rates don’t guarantee coverage throughout your club building.

Ubiquiti

UniFi access points and switches are an option for a planned, wired Wi-Fi infrastructure.

  • Ubiquiti offers centrally managed access points and PoE switches.
  • This type of installation requires planning for cabling, power and ongoing management. It’s more than simply replacing your router.

Joybuy products for mesh and wired access points

This selection includes multi-unit mesh systems for adding Wi-Fi access points, as well as a wired access point. For wireless backhaul, the stations need a strong enough connection at suitable locations. The access point needs a compatible Ethernet connection and PoE power.

TP-Link Deco BE22 (2-pack), mesh system with Wi-Fi 7

TP-Link Deco BE22 (2-pack), whole-home mesh system with Wi-Fi 7

This set is designed to add Wi-Fi access points in different locations. Its router or access point mode needs to suit your existing set-up.

Features include Wi-Fi 7, dual-band, Gigabit Ethernet, WPA3 and a guest network. With wireless backhaul, the stations need a strong enough signal at each location.

View at Joybuy
Ubiquiti UniFi U6+ WiFi 6 access point

Ubiquiti UniFi U6+ WiFi 6 access point

This access point is suitable for a wired Wi-Fi location. It isn’t a router or modem, and needs an Ethernet connection and PoE in accordance with 802.3af.

Features listed include Gigabit Ethernet, PoE, guest access and WPA2/WPA3. Power can be supplied by a suitable switch or injector, for example.

View at Joybuy
TP-Link Deco M4 AC1200 mesh Wi-Fi system (3-pack)

TP-Link Deco M4 AC1200 mesh Wi-Fi system (3-pack)

Three mesh units provide Wi-Fi access points in different locations. Check that router or access point mode suits your existing internet connection.

The system features dual-band Wi-Fi, Gigabit ports, a guest network and mesh roaming. With wireless backhaul, the stations need a strong enough connection at their planned locations.

View at Joybuy
TP-Link Deco S4 AC1200 mesh Wi-Fi system (3-pack)

TP-Link Deco S4 AC1200 mesh Wi-Fi system (3-pack)

This three-unit set is designed to provide Wi-Fi in different locations. With wireless backhaul, the connection you get depends on where you place the stations.

Features include dual-band Wi-Fi, Gigabit ports, mesh roaming and management through the Deco app. If you’re connecting it to an existing modem router, check the recommended operating mode.

View at Joybuy
MERCUSYS Halo H3000X mesh Wi-Fi system (2-pack), Wi-Fi 6 AX3000

MERCUSYS Halo H3000X mesh Wi-Fi system (2-pack), Wi-Fi 6 AX3000

This two-unit set is designed to add Wi-Fi access points. With wireless backhaul, the stations need a strong enough connection at their planned locations.

Features include dual-band Wi-Fi, three Gigabit ports per unit, MU-MIMO and WPA3.

View at Joybuy

Frequently asked questions about Wi-Fi for a club archive

Will a more powerful single router cover the archive on every floor?

You can only tell by checking the actual locations where the archive will be used. F.A.Z. Kaufkompass says mesh stations need a strong enough wireless connection. With compatible devices, existing Ethernet can provide a wired backhaul.

How do I connect Deco stations using existing Ethernet cables?

The cabling options depend on whether Deco is in router or access point mode. For router mode, TP-Link explains that satellites can connect through the main Deco’s LAN port or a switch connected to it. Check the instructions for your model to confirm the right set-up.

How do I keep the archive network separate from visitor Wi-Fi?

Set up a guest Wi-Fi network separately from your internal network, and check which access permissions apply to each. The BSI describes guest Wi-Fi as a separate network. You should also keep your router firmware up to date.

What maintenance should the club plan for after set-up?

The BSI recommends keeping your router firmware up to date and using automatic updates if your device offers this option. Agree who in the club will manage administrator access, updates and the guest network.

Which marking should I look for when buying a Wi-Fi device for use in Germany?

According to the German Federal Network Agency, products covered by the relevant EU harmonisation legislation and placed on the EU market must carry a CE mark. Check the marking and any required accompanying documents for the specific device version.