Learners with a dead zone on one floor
You can access your online learning portal near the router, but the connection is unreliable at your study space on another floor. The key is adding access points and choosing a suitable way to connect them.
If your internet connection works at the router, check how your Wi-Fi is distributed before replacing the main router just because you have a dead zone on another floor. Existing Ethernet between floors lets you connect an access point by cable; without cabling, well-positioned mesh nodes are an option, while Powerline performance depends on your home’s electrical wiring. Replacing the main router makes most sense if your current device also needs replacing and the new one is compatible with your connection.
You can access your online learning portal near the router, but the connection is unreliable at your study space on another floor. The key is adding access points and choosing a suitable way to connect them.
You can connect an access point at your study space using an existing network cable, avoiding a wireless connection between floors.
You also need to replace the main router and want to make sure the connection type and future Wi-Fi expansion are compatible.
First, check the connection where you actually study, then consider how an extra access point can be connected. Only replace the router if the modem and internet connection are compatible with the new one.
| Priority | What to check when buying | Who it matters most to |
|---|---|---|
| Signal at your study space | Check the connection at your study space and at the planned node location; don’t estimate the number and position of access points based on the stated coverage area alone. | If I study on another floor, I need a reliable connection to the portal there. Around 36% of consumers put coverage across multiple floors first. |
| A compatible main router | Check your connection type, existing modem and intended operating mode. | If I need to replace my router anyway, the new device must work with my internet connection. Around 29% of consumers prioritise connection compatibility. |
| Connection between floors | Check for existing Ethernet ports, suitable node locations and, if using Powerline, the connection in your own home. | If I’d rather not run new cables, I’m looking for a practical way to connect the floors. Around 21% of consumers focus mainly on how much effort installation will take. |
| Security and maintenance | Check the update options, supported encryption and how access details are managed. | If I want my home network to stay secure and well maintained, updates and access protection matter most. Around 14% of consumers make network security their top priority. |
Ceilings, walls and node placement all affect the connection in your home.
Plan around the places where you actually study and how the access points can connect. Check the connection once everything is set up.
The connection you can get over your electrical wiring depends on the installation in your home.
If you already have Ethernet, check that option first. Otherwise, you can only assess Powerline by trying it in your own home.
Depending on the results, you may need more adapters or a different type of connection.
Telekom requires a Telekom internet connection to use the services included with its Wi-Fi packages.
Before buying, check whether you’re choosing a standalone device, a compatible mesh system or services tied to a contract.
Package services may involve ongoing costs, depending on the contract you choose.
Worth considering if you want to keep using or replace an existing FRITZ!Box router and extend your network with FRITZ! repeaters.
Deco mesh systems are an option if you want several access points to form a single network. The Deco X50 supports wireless or optional Ethernet backhaul.
The ZenWiFi XD5 may suit different home network setups, with both router and access point modes available.
The Speedport 7 with additional Wi-Fi boosters is worth considering if you have a compatible Telekom landline connection.
Magic 2 WiFi 6 next combines Powerline with a Wi-Fi access point. It may be an option if you don’t have Ethernet cabling and a wireless connection between floors is difficult.
The Joybuy products below are mesh kits with several units, providing extra access points in different rooms or on different floors. Before buying, check that the operating mode and connection are compatible with your existing modem or router.
No image available
A two-unit mesh kit for adding access points, if router or access point mode suits your existing network.
Wi-Fi 7; dual-band; Gigabit Ethernet.
No image available
A set of three mesh units is an option if you need extra access points in several rooms or on multiple floors.
AC1200; dual-band; Gigabit ports.
No image available
A three-unit set for adding access points, if your existing modem or router is compatible with the selected operating mode.
AC1200; dual-band; Gigabit ports.
No image available
Two mesh units for adding access points; the product description also mentions connecting wired devices to the units.
Wi-Fi 6 AX3000; dual-band; 3 × Gigabit ports per unit; WPA3.
No image available
A set of three mesh units is an option if you need extra access points in several rooms or on multiple floors.
AC1200; dual-band.
Not necessarily. If your internet connection works at the router, first check the Wi-Fi signal where you study and whether a suitably connected access point would help. A new standalone router won’t guarantee a signal through several ceilings.
Place it somewhere it can still get a sufficiently strong wireless signal from the rest of the network, rather than in a room with poor reception. If you have an Ethernet connection between floors, a wired connection is another option.
Work out how many nodes or adapters you need for your study spaces, and check whether any service you want is tied to a provider’s package. Telekom says its Wi-Fi package services require a Telekom internet connection; this doesn’t generally apply to mesh systems bought separately.
Germany’s Federal Network Agency confirms that you can choose your own terminal equipment at the network termination point, including for passive fibre connections. You still need to check that the device is technically compatible with your specific connection.
Germany’s Federal Network Agency explains that manufacturers must, among other things, carry out a conformity assessment, issue an EU Declaration of Conformity and provide the required documentation. Check the details for the specific variant; a CE mark doesn’t prove Wi-Fi range.