Which connection is right for you?

For learners with a Wi-Fi dead zone on one floor

If you stream your language lesson in a fixed spot, a repeater is one option for extending your existing Wi-Fi. Check that it gets a strong enough signal at the intermediate location. devolo and FRITZ! offer general advice on Wi-Fi problems and using repeaters.

For learners with several floors in between

If there are several floors between the router and your study space, the connection back to the router is an important factor when choosing a solution. LAN or a powerline connection tested at home could be alternatives. devolo describes powerline as a connection over your electrical wiring and notes that sockets and electrical devices can affect performance; TP-Link describes Ethernet connections between Deco units.

For learners who move between study spaces

If you move between rooms or floors during a lesson, consider not just coverage but also how the router, access points and your device work together. FRITZ! and TP-Link describe mesh features that require compatible devices.

What matters when using Wi-Fi across multiple floors?

First, check whether there’s still a strong connection to the router at the planned repeater location. If not, find out whether a cable run, a compatible mesh system or powerline could work in your home.

The figures relate to consumers choosing Wi-Fi for streaming language lessons across multiple floors.

Priority What to check when buying Who it matters most to
Signal at a fixed study space Connection indicator at the intermediate location and playback of the lesson in your study space. If I study in one place, I want to check that playback is reliable enough there. Around 36% of consumers put signal strength in their fixed study space first.
Connection back through several floors Existing network socket or possible cable route, as well as the device’s LAN bridge or access point mode. If there are several floors in between, I want to sort out the connection back to the router rather than just improve reception in my study space. Around 29% of consumers prioritise the connection between floors.
Moving between study spaces Compatibility with your router; if possible, test the connection while actually moving between floors. If I move between rooms or floors during a lesson, I want to know whether the router, access points and my device work together. Around 21% of consumers prioritise moving between study spaces.
Connection without a network cable Test powerline adapters in the wall sockets you plan to use and check compatibility with any adapters you already have. If there’s no network cable available, I want to be able to test an alternative connection. Around 14% of consumers prefer a solution that doesn’t require new LAN cabling.

Avoiding purchasing and planning mistakes

  • Putting the repeater in a Wi-Fi dead zone

    With a wireless connection, the repeater also needs a usable signal from the router. If its connection back to the router is weak, it may not reliably extend Wi-Fi to your study space.

    First, find an intermediate location with a strong router signal and test the connection there. If it doesn’t work across the floors, consider another way to connect back to the router.

  • Assuming that ‘mesh’ means compatible

    TP-Link requires a compatible router to connect the RE705X to EasyMesh. Using it as a standard repeater isn’t the same as adding it to a compatible mesh system.

    Before buying, check the exact router model and the mesh feature you want to use.

    Depending on your setup, you may need additional compatible networking devices.

  • Assuming a LAN port means a wired connection back to the router

    A port for wired devices doesn’t automatically mean that the repeater is connected to the router by network cable. Check the operating mode and cable route separately.

    Check the device specifications for LAN bridge or access point mode, and plan the cable route.

    A wired connection back to the router may require an additional network cable or a suitable cable route.

  • Assuming powerline will work with any socket

    devolo notes that sockets and nearby electrical devices can affect the connection. Magic and older dLAN adapters are also incompatible with each other.

    Test the connection in the wall sockets you plan to use and, before expanding your setup, check that your existing adapters work together.

Key brands and what they’re best suited to

FRITZ!

The FRITZ!Repeater 1200 AX is designed to extend an existing Wi-Fi network. It may be a good fit if you already use a compatible FRITZ!Box for mesh networking.

  • FRITZ! lists Wi-Fi 6 and a Gigabit LAN port for the 1200 AX.
  • A LAN port alone doesn’t mean there’s a wired connection back to the router. A network cable must actually be connected for that. The model name doesn’t tell you how well the signal will travel through several floors.

TP-Link

The RE705X is described as a standalone repeater or access point. Deco X50, by contrast, is a separate system made up of multiple mesh units.

  • TP-Link describes the RE705X as supporting repeater and access point modes, as well as EasyMesh connectivity with a compatible router. For Deco units, the manufacturer describes Ethernet backhaul between nodes.
  • Choosing a repeater and choosing a Deco system are different purchasing and compatibility decisions. Having the same Wi-Fi name doesn’t, by itself, prove that the router and your device will work together seamlessly whenever you move between floors.

devolo

Magic 2 WiFi next can provide Wi-Fi at your chosen location and use your existing electrical wiring for the connection back to the router. This can be useful if there’s nowhere suitable to position a wireless repeater.

  • devolo says the starter kit includes two adapters, which are placed at the locations where you need them.
  • According to devolo, Magic and older dLAN adapters don’t work together. Sockets and nearby electrical devices can affect the connection, so performance depends on your particular installation.

NETGEAR

The EAX20 is a repeater designed for households that also want to connect wired devices at the location where it’s installed.

  • NETGEAR lists four Gigabit Ethernet ports and support for older Wi-Fi generations for this model.
  • The Ethernet ports alone don’t confirm either a wired connection back to the router or reliable Wi-Fi reception between floors.

Joybuy products for Wi-Fi across multiple floors

This selection includes wireless repeaters for one study area, a mesh kit for multiple locations and a LAN-connected access point. For repeaters, check the router signal where you plan to install them. For wired devices, make sure you can run the necessary cable.

MERCUSYS ME80X Wi-Fi 6 Range Extender

MERCUSYS ME80X Wi-Fi 6 Range Extender, AX3000 Dual Band

Repeater mode could suit a single study area if there’s still a strong connection to the router where you plan to install it.

The product name lists dual-band speeds of 574 Mbps at 2.4GHz and 2402 Mbps at 5GHz, plus a Gigabit port. For access point mode, connect it to the router with an Ethernet cable.

View at Joybuy
TP-Link RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

TP-Link RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

EasyMesh compatibility could be useful if you need coverage in several study spaces, provided your router and other devices are compatible too.

The product name lists a 2.5G Multi-Gigabit port, MLO and Smart Roaming. EasyMesh connectivity requires compatible devices.

View at Joybuy
MERCUSYS Halo H25BE mesh Wi-Fi kit with two units

MERCUSYS Halo H25BE Mesh Wi-Fi Set (2-Pack), Wi-Fi 7 BE3600

A mesh kit with two units could be a good option if you need coverage in several study spaces and can set up both units in suitable locations.

The product name lists dual-band and three Gigabit ports per unit. The instructions say to place the second unit within range of the first.

View at Joybuy
TP-Link RE190 AC750 Wireless Repeater

TP-Link RE190 AC750 Wireless Repeater, 433Mbps

For a fixed study space, this repeater could be an option if its location is still within range of your existing router’s Wi-Fi.

The product name lists dual-band and 433Mbps. The signal strength indicator can help you choose where to place it.

View at Joybuy
Ubiquiti UniFi U6+ Wi-Fi 6 Access Point

Ubiquiti UniFi U6+ Wi-Fi 6 Access Point, Dual-Band, Gigabit PoE, White

A LAN-connected access point could be a good option if you can run a network cable to your study area.

The product specifications say it needs an Ethernet connection to the network and PoE (802.3af). Wall or ceiling mounting is described.

View at Joybuy

Frequently asked questions

Does the repeater need to go on the floor with the weakest signal?

No. With a wireless connection, the repeater needs a strong signal from the router where it’s installed. Check the connection indicator at the planned intermediate location, then test the lesson in your study space.

Can I use a network connection between floors?

Yes, if your chosen device supports the right LAN bridge or access point mode. TP-Link describes an access point mode for the RE705X and Ethernet backhaul between Deco mesh nodes; these are different operating modes.

Will mesh work automatically with my router?

No. Compatibility depends on the specific router and access points. Check that they support the same mesh system. Having the same Wi-Fi name doesn’t prove compatibility or guarantee that your device will switch seamlessly between floors.

What can I check if powerline is slow at the socket I want to use?

First, test both adapters in the sockets you plan to use. devolo recommends plugging them directly into wall sockets rather than extension leads, and lists power supplies and dimmer switches as potential sources of interference.

Which product documents should I check for a Wi-Fi repeater in Germany?

As part of its market surveillance, the German Federal Network Agency lists the CE marking, identification of the product and manufacturer, German instructions with the required information, and the declaration of conformity among the checks it carries out. Check these details for the specific product; these checks don’t constitute an assessment of any individual listing.