Who is this guide for?

Learners with a Wi-Fi dead spot on another floor

If the connection is weak where you study during lessons, the key factors are the location and the connection between floors. The maximum speed quoted on the router box alone tells you little about the signal you’ll get there.

Households with a router that still works well

If your router is still suitable for your internet connection, a compatible extender may improve coverage in areas with a weak signal. Check that it’s compatible with your specific router model.

Households with tricky walls and ceilings

If the wireless connection to your lesson space isn’t reliable, you could use existing Ethernet cabling, run a new cable if possible, or try a powerline kit on site.

What should you look for when buying?

What to consider What to check before buying Who is it most relevant to?
Wi-Fi where you study Check the router’s location, your study space and possible positions for mesh units in between. With wireless mesh, test the connection between the units at the planned locations too. If my study space is on another floor, I need a usable connection there, not just a high maximum speed on the box; around 36% of consumers put coverage where they study first.
Extending your existing router Check the exact model name and firmware against the extender’s compatibility information. If my router still works with my internet connection, I’d rather improve coverage on the floor with a weak signal than replace it unnecessarily; around 29% of consumers prioritise keeping their existing router.
Connection between mesh units Check for existing Ethernet ports and support for Ethernet backhaul. Test the connection where you study during normal use. For a live lesson, I’d use a wired connection between the units if possible; around 21% of consumers prioritise this type of backhaul.
Connecting floors without Ethernet Try powerline adapters in the intended wall sockets, then test the connection and the app you use for lessons. If there’s no Ethernet between floors and the wireless signal struggles, I need another way to connect to the floor I want to reach; around 14% of consumers prioritise a solution that doesn’t rely on Ethernet between floors.

Which common buying mistakes should you avoid?

  • Assuming a faster standalone router will solve problems across several floors

    With mesh units, the quality of the connection between them matters too. A strong signal next to the router doesn’t prove that your study space on another floor will also have good coverage.

    Plan around your study space and the possible backhaul connection. Then check the signal at potential positions for the units before choosing based on the Wi-Fi standard or advertised maximum speed.

  • Combining mesh devices without checking compatibility

    The mesh features available depend on the router model and the extender you choose. For example, Telekom distinguishes between Speedport models that can act as a mesh base and the Smart and Smart 2 models, which don’t support mesh themselves.

    Before buying, check the full model names against the information for the intended operating mode.

  • Assuming powerline data rates are guaranteed at every socket

    Devolo notes that electrical devices can send interference back into the mains, affecting data transmission.

    Test both adapters in the intended wall sockets and check the connection during a typical lesson.

  • Confusing a mesh system with a modem for your internet connection

    TP-Link describes Deco as a system that needs an external internet source. It doesn’t automatically replace the device that connects you to the internet.

    Before buying, check which device provides your internet connection and how the mesh system will be set up with it.

Which brands are worth considering?

FRITZ!

FRITZ!Repeaters are an option for extending an existing FRITZ!Box network.

  • According to the manufacturer, the FRITZ!Repeater 1200 AX supports Wi-Fi mesh and wired networking via a Gigabit LAN port.
  • A single wireless repeater won’t necessarily reach across every type of ceiling. Also check which mesh features are available when it’s paired with your router.

TP-Link

Deco is a standalone range of mesh systems, available with one, two or three units.

  • TP-Link lists two 2.5 Gbit/s ports per unit on the Deco BE25, along with wired and wireless backhaul.
  • Deco needs an external internet source. TP-Link says that setup and management are handled through its mobile app and a TP-Link ID; advertised Wi-Fi speeds aren’t measurements taken where you study.

Telekom

Speed Home WLAN can extend a mesh network in households with a compatible Speedport router.

  • Telekom lists the Speedport Smart 3 and Smart 4 among the models that can act as a mesh base.
  • Telekom says that the Speedport Smart and Smart 2 don’t support mesh themselves. For these models, Telekom describes a different setup in which Speed Home WLAN is connected by Ethernet and used as the base.

devolo

Magic products use your home’s electrical wiring to connect floors and provide Ethernet or Wi-Fi at the other end, depending on the adapter.

  • Using your existing electrical wiring could be an option if neither a reliable wireless connection nor Ethernet between floors is available.
  • How well it works depends on your electrical installation and possible sources of interference. Devolo recommends testing the connection in the intended wall sockets.

ASUS

ZenWiFi XD5 is a mesh system available in different pack sizes, with the option of Ethernet backhaul.

  • ASUS says the XD5 units can be connected via Ethernet if suitable Ethernet ports are available.
  • Manufacturer claims about coverage and speed aren’t measurements for your particular home or study space.

Mesh systems for multiple floors

These multi-unit mesh systems provide extra Wi-Fi access points around your home. Before buying, check how each system will work with your internet connection and existing router.

TP-Link Deco BE22 Wi-Fi 7 mesh system, 2-pack

TP-Link Deco BE22 (2-pack), Wi-Fi 7 mesh system

This two-unit set is an option if you need Wi-Fi access points on more than one floor.

Wi-Fi 7; two Gigabit WAN/LAN ports per unit; router or access point mode.

View at Joybuy
TP-Link Deco M4 AC1200 mesh Wi-Fi system, 3-pack

TP-Link Deco M4 AC1200 mesh Wi-Fi system (3-pack)

Three mesh units can provide Wi-Fi access points throughout your home; the connection between them is still key.

AC1200; two Gigabit Ethernet ports per unit; Ethernet backhaul support; router and access point modes. TP-Link says Deco needs an external internet source, and that setup and management require the app and a TP-Link ID.

View at Joybuy
TP-Link Deco S4 AC1200 mesh Wi-Fi system, 3-pack

TP-Link Deco S4 AC1200 mesh Wi-Fi system (3-pack)

This three-unit set is designed for households looking to set up Wi-Fi in several areas; test the connection where you study.

AC1200; two Gigabit ports per unit; app-based setup. TP-Link says Deco needs an external internet source, and that setup and management require the app and a TP-Link ID.

View at Joybuy
MERCUSYS Halo H1200G AC1200 mesh Wi-Fi system, 3-pack

MERCUSYS Halo H1200G AC1200 mesh Wi-Fi system (3-pack)

Three units are one option if you need Wi-Fi access points in several rooms or on multiple floors.

AC1200; two Ethernet ports per unit; expandable with additional Halo units, according to the product description.

View at Joybuy
MERCUSYS Halo H25BE Wi-Fi 7 mesh system, 2-pack

MERCUSYS Halo H25BE Wi-Fi 7 mesh system (2-pack)

Two mesh units can provide extra access points; according to the product description, the second unit should be within range of the first.

Wi-Fi 7 BE3600; three Gigabit ports per unit; MU-MIMO.

View at Joybuy

Frequently asked questions

Do I need to replace my existing internet router to use mesh?

Not necessarily. First check whether your specific model supports a compatible mesh extender. TP-Link says a Deco system still needs an external internet source; also decide whether you’ll set it up behind your existing router in router or access point mode.

Where should I put an extra Wi-Fi unit?

With a wireless connection, the unit needs to reach both the router or previous unit and your study space with a strong enough signal. Don’t simply put it in the room with the worst reception. Check the connection at possible intermediate locations and where you study.

What should I do to keep my network secure after setup?

The German Federal Office for Information Security recommends, among other things, keeping your firmware up to date and using a long, complex Wi-Fi password. WPA3 also requires your connected devices to support the encryption; there is no general legal requirement to use WPA3.

Can I use my own compatible router with my internet connection in Germany?

Yes. Germany’s Federal Network Agency explains that you’re free to choose a suitable router and that your provider must supply the necessary access details. You’ll need to check separately whether a particular model is technically compatible with your connection; the agency also confirms freedom of choice for terminal equipment on passive optical fibre networks.

How can I tell whether a Wi-Fi device meets the basic EU requirements?

Products covered by the relevant EU harmonisation legislation and placed on the EU market must carry the CE marking. The German Federal Network Agency describes this as the manufacturer’s declaration following a conformity assessment, not an independent quality mark for Wi-Fi range. Check the marking and the documentation for the specific device.