Which solution is right for you?

Uploading photos through thick walls

If you want to upload large files from a room with poor Wi-Fi coverage, first check whether the extender can still get a good signal in a spot between the router and that room. devolo notes that walls, ceilings and furniture can weaken the connection.

Homes where Ethernet is an option

If you can run an Ethernet cable into or near the room you want to reach, you could use an access point connected by cable. FRITZ! explains how to use a repeater as an Ethernet bridge, so the connection to the router doesn’t have to pass wirelessly through the walls.

Mesh users with an existing router

If you want to use specific mesh features, check that your router, extender and, where necessary, firmware are compatible. TP-Link distinguishes between EasyMesh, OneMesh and Deco Mesh; Telekom also explains how to use Speed Home WLAN without mesh.

What should you look for?

When uploading photos through thick walls, the signal strength where you place the extender and the actual upload speed in the room matter more than a headline Wi-Fi speed alone.

What you need What to check before buying Who should consider this?
Connection through thick walls Check the signal and connection indicator at possible locations between the router and the room where you’ll upload files. If there’s no suitable signal, consider an Ethernet bridge or Powerline. If you want to upload photos from a room with poor coverage, you’ll need a usable connection where you place the extender. Around 36% of consumers put a reliable connection through walls first.
Usable upload speed Measure your broadband upload speed and the upload speed at the intended location separately. A stated Wi-Fi speed isn’t necessarily the upload speed you’ll get in practice. If you care most about the actual speed when uploading a photo album, your internet connection is an important thing to check. Around 28% of consumers prioritise upload speed.
Router compatibility Check your router model, the mesh system you want to use and any firmware needed for the specific combination of devices. If you want to connect an extender to your existing router and use specific mesh features, compatibility between the two devices is important. Around 22% of consumers put router integration first.
Installation effort Check in advance whether you have a suitable location between the router and the room, or could run an Ethernet cable or use Powerline adapters. If you want to keep installation simple and avoid extra devices, the connection you need should suit your home. Around 14% of consumers prioritise the effort involved and the equipment needed.

Avoid common buying mistakes

  • Putting the extender in a dead zone

    An extender can only pass on the signal it receives where it’s placed. If the router’s signal is weak there, the connection to the room where you want to upload files may be weak too.

    Try a spot between the router and the room, and check the connection indicator there. If there’s no suitable location, consider an Ethernet bridge or try Powerline.

  • Confusing headline Wi-Fi speeds with upload speeds

    The stated Wi-Fi speed and the speed of your broadband connection are two different things. An extender won’t fix a bottleneck in your internet connection.

    Measure your broadband connection and the upload speed where you plan to use it separately before deciding which connection needs improving.

  • Assuming mesh compatibility

    Basic Wi-Fi extension doesn’t automatically mean that all the mesh features you want will work with your router. Depending on the system, you may also need a compatible firmware version.

    Before buying, compare your router model, mesh system and firmware requirements with the information provided by the manufacturers.

Brands and product ranges to consider

FRITZ!

FRITZ! offers extenders to extend an existing Wi-Fi network. The manufacturer says the FRITZ!Repeater 1200 AX has Gigabit LAN and can be used as an Ethernet bridge; the FRITZ!Repeater 6000 has additional wireless radios and a 2.5 Gigabit LAN port.

  • An Ethernet bridge can bypass the wireless link between the router and extender if you can run a cable.
  • The manufacturer’s stated wireless speeds don’t tell you what upload speed you’ll get in your home. For the mesh integration described for the 1200 AX, FRITZ! requires a FRITZ!Box running FRITZ!OS 7 or later.

TP-Link

The RE705X range extender combines wireless extension with Gigabit Ethernet and an access point mode.

  • Access point mode could be useful if you can run a cable to the location.
  • TP-Link describes the RE705X as EasyMesh-compatible. Check which devices it supports and whether you need specific firmware; EasyMesh, OneMesh and Deco Mesh are different systems.

Telekom

Speed Home WLAN is designed to extend an existing home network, particularly when used with a compatible Speedport router.

  • Telekom describes a WPS setup process and an indicator for a weak connection to the router.
  • According to Telekom, Speed Home WLAN can work as an extender without mesh when connected to a router that doesn’t support mesh. Check that your specific router and extender will work together.

devolo

devolo offers both Wi-Fi extenders and Magic Powerline kits, which transmit data over your home’s electrical wiring.

  • Powerline uses a different route from a wireless extender passing the signal through walls.
  • The manufacturer’s range and speed figures don’t show how well your home’s electrical wiring will perform. An extender and a Powerline kit are different solutions.

Joybuy products for Wi-Fi extenders and Ethernet access points

This selection includes wireless Wi-Fi extenders and wired access points for locations where an Ethernet cable is available.

TP-Link RE190 AC750 wireless extender, white

TP-Link RE190 AC750 Wireless Repeater

At a suitable location between the router and the room, the signal strength indicator can help you position the extender; it needs to be within range of the router’s Wi-Fi.

Dual-band; WPS setup; stated data rate: 433 Mbps.

View at Joybuy
MERCUSYS ME80X Wi-Fi 6 range extender, AX3000, dual-band

MERCUSYS ME80X Wi-Fi 6 Range Extender AX3000

As a wireless extender, it needs a connection to the router where you place it; connect it to the router via Ethernet to use the stated access point mode.

Dual-band: 574 Mbps at 2.4 GHz and 2402 Mbps at 5 GHz; Gigabit LAN; WPS or app setup; signal strength indicator.

To use access point mode, connect the Gigabit port to the router via Ethernet.

View at Joybuy
TP-Link RE235BE BE3600 dual-band Wi-Fi 7 range extender

TP-Link RE235BE BE3600 Dual-Band Wi-Fi 7 Range Extender

For wireless extension, the extender needs to be within range of your existing router’s Wi-Fi; an Ethernet port also gives you the option of a wired connection.

Wi-Fi 7; 2.5 Gigabit Ethernet port; EasyMesh support according to the product details.

EasyMesh requires compatible EasyMesh devices. Check whether your router supports it.

View at Joybuy
Ubiquiti UniFi U7 Lite WiFi 7 access point, dual-band, 2.5GbE PoE+

Ubiquiti UniFi U7 Lite WiFi 7 Access Point

This model could suit a Wi-Fi access point near the room where you upload files, if you can run an Ethernet connection there and provide PoE power.

Dual-band; 2.5GbE; PoE+.

Requires an Ethernet connection to the network and a compatible PoE power supply.

View at Joybuy
Ubiquiti U7 Mesh access point, 5000 Mbit/s, Power over Ethernet

Ubiquiti U7 Mesh Access Point

As a wired access point, this model can replace the wireless link from the router if you can run an Ethernet cable to the intended location.

Speed stated in the product name: 5000 Mbit/s; Power over Ethernet.

Using it as an access point requires an Ethernet connection and PoE power.

View at Joybuy

Frequently asked questions

Where should you place a wireless extender?

Try a spot between the router and the room where you want to upload files, where the extender can still get a strong signal. Walls, ceilings and furniture can weaken the connection; an indicator on the device can help you find the right spot.

Why isn’t my photo upload any faster, even with better Wi-Fi?

Your broadband connection could be the bottleneck, even if your Wi-Fi has improved. Measure your broadband connection and the upload speed where you plan to use it separately; Germany’s Federal Network Agency provides tools for checking your actual internet access speed.

Does an extender have to be made by the same manufacturer as the router?

Not necessarily for basic Wi-Fi extension, but the mesh features you want depend on the specific combination of devices. TP-Link lists requirements and possible firmware updates for EasyMesh. Telekom also explains how Speed Home WLAN can work without mesh when connected to a router that doesn’t support mesh.

When is an Ethernet bridge a good alternative?

An Ethernet bridge could work if you can run a network cable to the extender or near the room where you want to upload files. That way, the connection between the router and access point doesn’t have to pass wirelessly through the problem walls.

What requirements apply to Wi-Fi extenders in Germany?

Products placed on the market in Germany or the EU are subject to the applicable EU harmonisation legislation. The Federal Network Agency explains that covered products must carry a CE marking where the requirement applies. The CE mark isn’t independent proof of a particular device’s upload performance.