Families with Wi-Fi dead spots on one floor
If you want to watch videos in a particular spot, it’s important to find a suitable location where the repeater can still get a good signal from the router.
A wireless repeater could work for family videos across three floors, provided it still has a good connection to the router where you place it. If there’s a usable Ethernet connection between floors, an access point or Ethernet backhaul is a sensible alternative to a wireless link. Mesh can connect several Wi-Fi zones, but you’ll need compatible devices, and it can’t compensate for a weak connection between nodes.
If you want to watch videos in a particular spot, it’s important to find a suitable location where the repeater can still get a good signal from the router.
If you can use existing network sockets, you could consider an access point or a compatible Ethernet backhaul rather than relying on a wireless connection between floors.
If you need coverage in several areas, check whether your router and additional nodes support the mesh features you want to use.
For families streaming videos across several floors, the location you need to cover, the connection between floors and router compatibility are all important factors.
A good fit if: you only need coverage in one additional spot for watching videos and the planned location still gets a good signal from the router.
The trade-off: The connection to the router is still wireless. A high advertised Wi-Fi data rate doesn’t prove you’ll get a good connection through the floors of your home.
A good fit if: you need coverage in several areas, there are suitable locations for the nodes, and your router and nodes support the mesh features you want.
The trade-off: Several nodes require extra devices and sockets. Mesh can’t fix a weak wireless connection between them.
A good fit if: there’s already a usable network cable between floors, or you can install one.
The trade-off: A wired connection requires compatible sockets and may involve installation work. Access point mode and a manufacturer-specific mesh system aren’t the same thing.
| Priority | What to check before buying | Who is this important to? |
|---|---|---|
| Reliable video playback | Check the repeater’s connection to the router at the planned location, as well as reception on the device you’ll use to watch videos. | If I want to watch family videos on a particular screen, the connection where I’ll be watching matters most. Around 36% of consumers put a reliable video connection at their viewing location first. |
| Connection between floors | Check for existing Ethernet sockets and possible locations for a repeater or mesh nodes. | If the rooms are spread across several floors, I don’t want to rely on Wi-Fi alone to connect them. Around 29% of consumers name this connection as their top priority. |
| Router compatibility | Check your exact router model against the details of the mesh modes it supports. | I want to keep using my existing router and know before buying whether this particular mesh combination will work. Router compatibility comes first for around 21% of consumers. |
| Set-up and ongoing costs | Consider how many nodes and sockets you’ll need, and whether any cabling work may be required. | If I want to make do with as few devices as possible and avoid installing extra cabling, keeping set-up straightforward matters to me. Around 14% of consumers focus mainly on the set-up and ongoing effort involved. |
A model’s data rate doesn’t tell you how good the connection will be where you place it or between floors.
Check the possible locations and the connection at each one. If there’s an existing network cable between floors, you could compare access point mode with a compatible Ethernet backhaul.
Manufacturers have different requirements for their mesh features. You can also extend your Wi-Fi without connecting the device to your router’s mesh system.
Before buying, check the exact router model, device generation and explicitly supported mesh mode.
A single wireless access point won’t necessarily suit every floor. A wired solution, on the other hand, may require extra installation work.
First, note where you’ll use the connection, which network sockets are available and where you could place a node. Then compare the set-ups that would work in your home.
FRITZ!Repeaters such as the 1200 AX are worth considering if you want to extend a compatible FRITZ! home network.
The range includes both standalone repeaters and mesh systems. The Deco X50 is designed to use Ethernet backhaul to connect its units.
The WiFi 6 Repeater 5400 is one possible repeater option if you want to choose where to place it.
Speed Home WLAN is worth considering if you want to extend your network to suit your router set-up.
The selection includes mesh systems and standalone Wi-Fi repeaters. For videos across several floors, the location, connection between nodes and router compatibility are still key.
No image available
For several Wi-Fi zones, if you’re looking for a two-unit mesh system with an operating mode to suit your home network.
Dual-band Wi-Fi 7 with MLO; two Gigabit WAN/LAN ports per unit. Router and access point modes are listed.
No image available
For extending an existing Deco network if you need a wired connection or another access point where you plan to place the unit.
Dual-band AC1200 Wi-Fi, two Gigabit ports, and router and access point modes are listed. Described as a single unit for extending a Deco network; this offer is not a multi-unit set.
No image available
For several Wi-Fi zones, if you’re considering a set of three mesh units with one shared network name.
Dual-band AC1200 Wi-Fi and two Gigabit ports per unit are listed. Check the connection between the nodes and whether the system is right for your home before buying.
No image available
For an additional Wi-Fi zone or a location with an Ethernet connection where you can use access point mode.
Repeater and access point modes, a Gigabit LAN port and a signal strength indicator are listed. The indicator can help you choose a location, but it doesn’t prove the device will cover three floors.
No image available
For an additional Wi-Fi zone, provided the planned location is still within range of the router.
EasyMesh, MLO and a 2.5 Gigabit port are listed. The router must support EasyMesh for the mesh feature described.
Check the signal on the screen you’ll be using, as well as the repeater’s connection to the router at the planned location. FRITZ! says both connections are important when positioning a mesh repeater.
Not just because you’re having trouble playing locally stored videos: first check the connection within your home network. For videos streamed from an online service or uploads, you can check your internet speed separately. The Bundesnetzagentur’s broadband measurement tool tests your internet connection, not the connection between two devices on your home network.
No, mesh functionality depends on the specific router and repeater combination. According to TP-Link, the RE705X requires an EasyMesh-compatible router for EasyMesh. Deutsche Telekom distinguishes between connecting Speed Home WLAN to a mesh system and using it as a repeater without mesh.
Check the firmware updates and settings recommended by the manufacturer for your exact device. Deutsche Telekom warns that missing firmware updates can lead to malfunctions and security vulnerabilities.
Check the details for the specific wireless product and the requirements that apply to the frequency bands it uses. When inspecting radio products offered for sale, the Bundesnetzagentur checks, among other things, whether the CE marking is correct and whether the product and manufacturer details can be identified. Its general allocation 128/2023 specifies the 2400.0 to 2483.5 MHz range for 2.4 GHz; the requirements for 5 GHz are set out in the relevant general allocation. Decision 136/2022 on the general allocation for 5 GHz was amended by 49/2023 and revoked Decision 151/2018. This information doesn’t replace checking the conformity of a specific product listing.