Film fans with a Wi-Fi dead zone near the TV
If you stream in a fixed room behind thick internal walls, first find out whether the Wi-Fi is too slow or your internet connection itself is the problem.
First, check the connection at your TV and near your router to find out whether the bottleneck is your internet connection or the Wi-Fi signal. A new router alone won’t fix a weak connection through thick internal walls. If your internet connection is fast enough, a wired Ethernet connection or a mesh node placed somewhere with a decent signal may be a better option. Consider replacing your main router primarily if it doesn’t support your type of connection or the features you need. If you’re buying a wireless device in Germany, also check the CE marking and declaration of conformity for that specific version; the German Federal Network Agency lists these as relevant checks.
If you stream in a fixed room behind thick internal walls, first find out whether the Wi-Fi is too slow or your internet connection itself is the problem.
An Ethernet cable to your TV or a suitable access point can bypass a tricky Wi-Fi connection. It’s an alternative worth weighing up against a wireless mesh system.
If you want to keep using your main router, check whether your existing device can be expanded in a suitable way.
First, check the connection at your TV and compare it with the signal near your router. This will help you decide whether to run a cable, use a mesh node in a spot with a good signal, or replace your main router.
| What you need | What to look for when buying | Who is this most relevant to? |
|---|---|---|
| Signal where you watch films | Compare playback on your TV with the connection near your router. For 4K UHD streaming on Netflix, Netflix recommends a stable internet speed of at least 15 Mbit/s. This figure isn’t a guarantee for other services or for your Wi-Fi connection. | If I get dropouts where I usually watch films, I want to know whether the cause is my internet connection or the Wi-Fi. Around 36% of consumers would put a stable signal at the TV first. |
| Getting through thick walls | Check for existing Ethernet wall sockets or whether you could run a cable. With wireless mesh, the node also needs a decent connection to the router. | If I can run an Ethernet cable to the TV or a suitable spot in between, I’d bypass the Wi-Fi connection. Around 29% of consumers would prioritise running a cable. |
| Keeping your existing router | Check the exact router model, its mesh compatibility and the firmware it requires. Telekom says the Speedport Smart 4 with up-to-date firmware can act as the mesh base for Speed Home WLAN. | If my router otherwise works reliably, I want to keep it and add a compatible extension. Around 21% of consumers would prioritise continuing to use their existing router. |
| Connection type and included equipment | Check that the router matches your DSL, cable or fibre connection, and has the modem and telephony features you need, as well as the right number of mesh nodes. If you’re buying a wireless device in Germany, check the CE marking and declaration of conformity for that specific version; the German Federal Network Agency lists these as market surveillance checks. | If I’m switching, I want to make sure the router, modem and connection are compatible, and that the package includes all the nodes I need. Around 14% of consumers would first weigh up connection type and included equipment. |
A high advertised data rate doesn’t tell you how stable the Wi-Fi signal will be where you watch films, with internal walls in the way.
Test playback on your TV and compare it with the connection near your router. If you’re using a mesh node, also check that the planned location still gets a good signal.
Deco BE25 is available in different pack sizes. A single node isn’t the same as a set with several units.
Before choosing a set, check how many nodes it includes against the layout you have in mind.
Depending on your set-up, you may need an extra node.
A mesh system and a router with a built-in modem do different jobs. Depending on your connection, you may also need a suitable modem or an existing modem router.
Before you buy, check whether you use DSL, cable or fibre, and which modem and telephony features you need.
The FRITZ!Box 7690 is an option if you’re looking for a new main DSL router with mesh. FRITZ! also describes how to connect it to a fibre-optic modem.
Speedport Smart 4 and Speed Home WLAN are relevant to households looking to extend a compatible existing Speedport router.
The Deco X50 and Deco BE25 ranges offer multi-node mesh systems as an alternative to replacing your router alone.
ZenWiFi XD5 is a mesh option if you have Ethernet between suitable locations.
This selection includes a main DSL router with Ethernet ports and mesh functionality, for compatible DSL connections and possible extensions.
No image available
For a compatible DSL connection if you’re looking for a main router with Ethernet ports and FRITZ!Mesh functionality.
Wi-Fi 6 and a built-in VDSL Supervectoring 35b modem.
Four Gigabit LAN ports; described as a FRITZ!Mesh Master.
This device isn’t described as a direct modem replacement for cable or fibre connections; according to the product description, you’ll need an external modem connected via WAN.
Before you buy, check the CE marking and declaration of conformity for the specific device version. A general model description isn’t a substitute for this check.
For 4K UHD on its service, Netflix recommends a stable internet speed of at least 15 Mbit/s. Check the connection on your playback device. This guideline doesn’t tell you the speed required by every other streaming service, or how stable your Wi-Fi connection will be.
Place it somewhere it still gets a decent connection to the main router or another node, rather than right at the edge of a Wi-Fi dead zone. If the Speed Home WLAN connection indicator is weak, Telekom recommends moving the node closer to the Speedport or other Wi-Fi boosters.
Yes. The German Federal Network Agency explains that you’re free to choose a compatible router and that your provider must supply the necessary access details. You should still check that the device is technically compatible with your specific connection.
If you’re buying a wireless device in Germany, check the CE marking and declaration of conformity for the specific device version. The German Federal Network Agency also lists product identification and correct manufacturer details as checks.
An extra node uses electricity; other costs may depend on the deal and contract you choose. Check whether the router or extension is bought or rented, and whether any optional services are included.