Students in a Wi-Fi dead zone
If you download course materials in a room behind thick walls, the most important thing is getting a good signal in that particular study space. ASUS Support explains that Wi-Fi bands differ in range and data speed.
If your internet connection is working and the only problem is poor coverage in your study space behind a wall, adding an access point or mesh node is often a better option than replacing your router. First, check where your router is and how strong the signal is in your study space. If you can run a cable, Ethernet backhaul can connect your Wi-Fi nodes without relying on a wireless link. Any new main router must be compatible with your connection type, and a higher stated Wi-Fi speed doesn’t guarantee faster downloads through walls.
If you download course materials in a room behind thick walls, the most important thing is getting a good signal in that particular study space. ASUS Support explains that Wi-Fi bands differ in range and data speed.
If your internet connection is working but the Wi-Fi is weak in your study space, adding an access point could be a good way to extend your network. TP-Link Germany explains Ethernet backhaul as a wired connection between Deco units.
If you need to replace your main router anyway, check that it suits your connection type and consider how you might want to extend your network in future. For example, FRITZ! states that the FRITZ!Box 7530 AX supports DSL connections up to 300 MBit/s.
ASUS Support explains that 2.4 GHz has a longer range but is slower, while higher frequency bands are more easily blocked by obstacles. That’s why signal strength in your study space matters more than the stated speed right next to your router.
A good option if: your router is in a poor spot and you can still get some signal in your study space.
The trade-off: Moving it somewhere more open and central won’t cost you anything, but it may not reliably overcome heavy signal loss through walls.
A good option if: your connection and main router are working, but your study space has poor coverage.
The trade-off: Ethernet backhaul requires a cable; a wireless connection still depends on the location of the node and the walls in between.
A good option if: your existing device needs replacing or lacks a connection type or mesh feature you need.
The trade-off: The model must suit your connection. Replacing your router alone won’t eliminate a Wi-Fi dead zone in your study space.
| What you need | What to check before buying | Who is this especially important for? |
|---|---|---|
| Wi-Fi in your study space | Signal strength in the room where you actually study; supported Wi-Fi bands and whether the specific system can be extended. | If I download course materials in a room behind thick walls, I first need to make sure there’s a good enough Wi-Fi signal in that room; around 36% of consumers prioritise coverage in their study space. |
| Connection to the additional Wi-Fi point | LAN port and support for Ethernet backhaul, or a suitable access point mode. | If I need an additional Wi-Fi point, the connection to the main router mustn’t be blocked by the wall too; around 29% of consumers prioritise the connection between nodes. |
| Compatibility with your internet connection | Connection type, existing modem or ONT, and the ports and operating modes supported by the exact model. | If I need to replace my main router, it should work directly with my connection; around 21% of consumers put connection compatibility first. |
| Security and maintenance | The model’s update process and security options; install any available updates after setup. | If I want to use my home network for a long time, I want to be able to set up and maintain my devices and Wi-Fi securely; around 14% of consumers prioritise security and ongoing maintenance. |
Manufacturers’ stated Wi-Fi data speeds are based on specific technical conditions. Your internet connection, obstacles and devices also affect performance.
Check your internet connection and Wi-Fi signal in your study space separately before replacing your device for a higher stated speed. Ofcom offers a way to test your fixed-line broadband connection.
An additional node still needs a decent connection to the main router. TP-Link describes Ethernet backhaul as a wired connection between Deco units.
Before buying, check whether there’s a suitable halfway point and whether you can run a cable to it. Then check which backhaul mode is supported and make sure it’s set up correctly.
Ethernet backhaul may require a network cable, which might need to be installed.
A mesh device isn’t automatically a DSL router with a built-in modem. devolo explicitly states that its separately listed WiFi 7 BE6500 Router cannot be connected directly to DSL or VDSL.
Before replacing your main router, check the connection type, any existing modem and the exact model’s intended operating mode.
Depending on your connection, you may still need a compatible modem or a different router for your connection type.
FRITZ! describes the FRITZ!Box 7530 AX as a DSL router with Wi-Fi 6, and the FRITZ!Mesh Set 2700 as an extension with several Wi-Fi nodes.
The Deco X50 range is a Wi-Fi 6 mesh system available in different pack sizes. TP-Link also describes a wired connection between Deco units.
ASUS describes the RT-AX58U as a dual-band Wi-Fi 6 router. According to the manufacturer, AiMesh lets you extend your network with compatible ASUS devices.
devolo describes its WiFi 7 Mesh BE6500 range as a system with several nodes; the range also includes a separately sold router.
The following Joybuy products are mesh or access point solutions for extending an existing network. For each one, check the operating mode, compatibility and whether you’ll still need your existing router or a modem.
No image available
A good match for an existing network if you’re looking for two mesh units with router or access point mode.
Specifications include Wi-Fi 7, dual-band and two Gigabit WAN/LAN ports per unit. The product description says an Ethernet cable is included.
No image available
Could work as an additional Wi-Fi point if you use a compatible UniFi network.
Described as having a Gigabit Ethernet uplink and PoE adapter; according to the product description, it’s suitable for indoor and outdoor installation.
No image available
A good match for an existing home network if you need several mesh units with router or access point mode.
Specifications include AC1200, dual-band and two Gigabit LAN/WAN ports per unit.
No image available
Could add another Wi-Fi point if you’re looking for a mesh system with two units.
Specifications include AX1500, dual-band Wi-Fi 6 and two Gigabit Ethernet ports per unit.
No image available
Could be a good option for two connected Wi-Fi points if you’re looking for a mesh set with several Gigabit ports per unit.
Specifications include Wi-Fi 7 BE3600, dual-band, three Gigabit ports per unit and WPA3.
Not necessarily. First, check whether your internet connection itself is slow or whether it’s just the Wi-Fi in your study space. If your connection is working and only that room has poor coverage, adding an access point could be an alternative to replacing your router. Ofcom offers a way to test your fixed-line broadband connection.
If it connects wirelessly, the node still needs a decent connection to the main router. If you can run a network cable and your system supports Ethernet backhaul, you can connect the nodes that way; TP-Link describes this feature for Deco units.
No. A mesh system isn’t automatically a DSL router with a built-in modem. devolo states that its separately listed WiFi 7 BE6500 Router cannot be connected directly to DSL or VDSL. Check whether the specific model needs a modem and which operating mode suits your connection.
No. A higher advertised Wi-Fi speed doesn’t guarantee a faster connection in your study space. ASUS Support explains that 2.4 GHz has a longer range but is slower, while higher frequency bands are more easily blocked by obstacles. Your internet connection, router location and device also matter.
An additional node needs a suitable spot and a power supply. Ethernet backhaul may also require a network cable and installation. If you replace your router, your existing modem and telephone features may affect which model you choose.