Which solution is right for you?

Uploading portfolio files from a room behind several walls

If you’re uploading large files from a home office, it’s important to know whether you can find a spot where the repeater gets a good signal from the router, or whether a cable or Powerline might work better. FRITZ! says the quality of the connection between the router and repeater is key when choosing where to place it.

Uploaders unsure what’s limiting their speed

If large files are taking a long time to upload, compare speeds near the router and at your desk to help distinguish between a Wi-Fi issue and your internet connection. The German Federal Network Agency provides a broadband measurement tool for this.

Using an existing router mesh

If you want to extend an existing mesh, check the specific combination of router, firmware and repeater. Telekom says the Speedport Smart and Smart 2 are not mesh bases themselves; it describes a Speed Home WLAN connected via LAN as an alternative for mesh.

What should you look for when buying?

First, work out which part of the connection is limiting your upload. Then compare a wireless repeater, a LAN bridge and Powerline based on what’s practical in your home.

Dual-band wireless repeater

A good choice if: You can find a midway spot where the repeater gets a good signal from the router and can also reach your home office.

What to consider: The link back to the router still relies on a wireless signal travelling through your home. FRITZ! recommends checking the connection quality at the planned location.

Tri-band or mesh repeater

A good choice if: You have a suitable spot with a decent wireless signal and want to cover several devices or a larger area.

What to consider: An extra wireless band can’t make up for a poor signal from the router. Mesh features depend on the router model and firmware.

LAN bridge or wired access point

A good choice if: You can run an Ethernet cable to a suitable location near your home office.

What to consider: You’ll need to run a cable and have a suitable Ethernet connection. The access point won’t need to reach the router wirelessly through the walls.

Powerline with Wi-Fi in the room you want to reach

A good choice if: You can’t run an Ethernet cable and the wireless signal is too weak by the time it reaches your home office through several walls.

What to consider: The connection runs over your electrical wiring. devolo notes that socket choice and electrical interference can affect data rates.

What you need What to check before buying Who it matters most to
A reliable connection through walls Check the router signal at the planned repeater location. If the wireless link back to the router is too weak, consider a LAN bridge. If I’m uploading portfolio files through several walls, I need a stable connection at my desk. Around 36 % of consumers say reliable reception is their top priority.
Actual upload speed Compare upload speeds near the router and at your desk. Don’t treat advertised Wi-Fi data rates as a guarantee of upload speed. If file uploads are slow, I want to find out whether Wi-Fi or my internet connection is the bottleneck. Around 29 % of consumers put this distinction first.
Router and mesh compatibility Check that the router model, firmware and intended repeater mode are compatible. If I want to keep using my existing mesh, compatibility with my specific router matters to me. Around 21 % of consumers say router integration is their main concern.
Setup without an Ethernet cable Plan for adapters and Wi-Fi in the room you want to reach. Test Powerline using the wall sockets you intend to use. If I can’t run an Ethernet cable to my home office, I need an alternative to a wireless signal travelling through the walls. Around 14 % of consumers with a relevant main concern cite this installation issue.

Avoiding buying and placement mistakes

  • Plugging the repeater in just beyond the thickest walls

    The connection between the repeater and router also needs to be strong enough. If you place it where the router signal is already weak, you can’t rely on it to provide a stable wireless connection.

    Try the planned midway location and check the connection quality there. If the link back to the router is still weak, consider a LAN bridge or a Powerline kit tested at the sockets you’ll actually use.

    Choosing the wrong location could mean buying another device when all you really need is a different position or connection type.

  • Confusing advertised Wi-Fi data rates with your internet upload speed

    A high Wi-Fi specification won’t fix a bottleneck with your internet connection. The German Federal Network Agency describes its broadband measurement tool as a way to compare your actual data rate with the rate agreed in your contract.

    Compare upload speeds near the router and at your desk under similar conditions before choosing a device based on its advertised Wi-Fi data rate.

  • Assuming every repeater will work with your existing mesh

    Mesh features can depend on the router model and firmware. A repeater connection alone doesn’t tell you whether it will integrate with your mesh as intended.

    Before buying, check your specific router model, firmware and intended operating mode.

  • Assuming Powerline is a guaranteed interference-free alternative

    Socket choice and electrical interference can affect data rates over your home’s wiring.

    Test the adapters in the sockets you plan to use long term. devolo recommends plugging its adapters directly into wall sockets rather than extension leads, wherever possible.

    If the connection isn’t good enough at one socket, you may need to test it at another.

Key brands at a glance

FRITZ!

The models mentioned range from the compact FRITZ!Repeater 1200 AX with Gigabit LAN to the FRITZ!Repeater 6000 with tri-band and 2.5 Gigabit LAN. These connection and wireless features are stated by the manufacturer; they are not measurements of portfolio upload performance.

  • Depending on the model, you may get both a wireless connection and a LAN port as a wired alternative.
  • Check that mesh features work with your router and that the planned location has a usable wireless link back to it.

Telekom

According to Telekom, Speed Home WLAN is a Wi-Fi 6 extender with Ethernet and Wi-Fi connection options for compatible Speedport home networks.

  • According to Telekom, a Speed Home WLAN connected via LAN can be set up as a mesh base with certain Speedport configurations.
  • Telekom says the Speedport Smart and Smart 2 are not mesh bases themselves. Suitability depends on the specific router model and firmware.

devolo

According to the manufacturer, the range includes Wi-Fi 6 repeaters and Magic Powerline products, which use your home’s electrical wiring to connect to the room you want to reach.

  • Powerline can bypass a wireless link through walls if running an Ethernet cable isn’t an option.
  • devolo notes that socket choice and electrical interference can affect the achievable Powerline data rate.

Joybuy products for Wi-Fi and wired connections

The models below cover wireless Wi-Fi extenders, an extra unit for an existing mesh and wired access points. The right option depends on whether you have a suitable spot with a decent wireless signal or an Ethernet cable available near your desk.

TP-Link RE190 AC750 wireless repeater

TP-Link RE190 AC750

This wireless repeater is worth considering if it can still pick up the router’s Wi-Fi from the midway location. Its signal-strength indicator can help you find the right spot.

Dual-band; 433 Mbps according to the product name. The repeater must be within range of the existing router Wi-Fi, according to the product description.

View at Joybuy
MERCUSYS ME80X Wi-Fi 6 range extender

MERCUSYS ME80X Wi-Fi 6 AX3000

You can use the extender to boost your Wi-Fi wirelessly, or connect it to the router via Ethernet and use it in access point mode.

Dual-band: 574 Mbps at 2.4 GHz and 2402 Mbps at 5 GHz according to the product specifications; Gigabit Ethernet. Access point mode requires an Ethernet connection to the router.

View at Joybuy
TP-Link RE235BE BE3600 dual-band Wi-Fi 7 range extender

TP-Link RE235BE BE3600 Wi-Fi 7

This wireless extender is an option if the location you choose is still within range of the router’s Wi-Fi.

Dual-band; MLO; 2.5 Gigabit Ethernet port. EasyMesh compatibility is listed for compatible routers and extenders.

View at Joybuy
Ubiquiti U7 Mesh access point

Ubiquiti U7 Mesh

This wired access point is a good fit for a workspace you can connect using an Ethernet cable.

Wi-Fi 7; 2.5 Gigabit Ethernet uplink with PoE. According to the product description, it requires network cabling and a suitable PoE injector or network switch.

View at Joybuy
TP-Link Deco X10 mesh unit, single pack

TP-Link Deco X10 Wi-Fi 6 AX1500, 1 Pack

This additional mesh unit is designed for an existing TP-Link Deco mesh, not as a general-purpose extender for any router.

Dual-band Wi-Fi 6; two Gigabit ports. According to the product description, you can set it up as an additional node using the Deco app.

View at Joybuy

Frequently asked questions

How can I tell if a repeater could improve my portfolio uploads?

Compare upload speeds near the router with those at your desk. If your internet connection is already slow, deal with that bottleneck first. If the Wi-Fi link is the main problem, try a suitable repeater location or a wired alternative. The advertised Wi-Fi data rate alone doesn’t tell you what upload speed you’ll get.

Where should I place a wireless repeater?

Choose a spot where the repeater still has a good connection to the router and can also reach the devices in your home office. Don’t put it somewhere the router signal is already weak; check the connection indicator or the app designed for your device.

What should I check after installing Powerline?

Test the connection at the sockets you plan to use long term. devolo recommends plugging its adapters directly into wall sockets rather than extension leads, wherever possible, and notes that nearby electrical devices can cause interference.

What extra work should I consider before buying?

Check whether you can run an Ethernet cable or will need to test Powerline adapters at the sockets you plan to use. If you’re buying a mesh product, also check that your router and intended operating mode are supported. The German consumer advice centre explains the difference between a voluntary manufacturer’s guarantee and your statutory rights when a product is faulty.

What product documents should I check for a Wi-Fi repeater in Germany?

For wireless products covered by the relevant EU harmonisation rules, the German Federal Network Agency lists CE marking and the declaration of conformity among the things to check. For the specific product listing, also check that the required instructions for use and safety information are available in German; general model specifications don’t confirm this for every individual listing.